HIKROBOT MV-SC3060XM-16M-WBN — Smart Cameras & Vision Sensors

This 16 mm-focal-length member of the SC3000 series likewise offers 6.0 MP resolution and Mono8 pixel format. Its CMOS rolling-shutter sensor has a 2 µm × 2 µm pixel size and 1/2.4″ optical format, reaching 3200 × 1920 resolution at up to 20 fps, with gain from 0 dB to 33 dB and exposure from 540 µs to 200 ms. Unlike its siblings, this variant’s M12-mount, mechanically (motorised) focused lens has a 16 mm focal length; the longer focal length narrows the field of view and positions the camera farther from the target, which is an advantage for applications where small details must be magnified and resolved. Standard equipment includes a semi-polarised lens cover, a focused white light source (with red/blue/infrared/ultraviolet options), and a 360° indicator light.

The vision-tool set spans point-to-point and point-to-line measurement through contrast, greyscale area, pitch, width, average brightness, line-to-line angle, diameter and line angle measurement, as well as blob/edge/contour presence-absence inspection; programs can be exported/imported and up to 32 stored on the device. Communication protocols are RS-232, TCP, UDP, FTP, PROFINET, Modbus, EtherNet/IP, MELSEC/SLMP, FINS and Keyence KV, over a 100 Mbit/s Fast Ethernet data interface. The 12-pin M12 connector supplies power together with 3 opto-isolated inputs (LINE0/1/2), 3 opto-isolated outputs (LINE3/4/5) and 1 RS-232 line; top-button triggering is also possible. Powered at 12-24 VDC, the unit averages 6.6 W and peaks at 22 W with built-in illumination on. The IP67-rated housing operates at 0-50 °C, is CE and KC certified, and alignment is aided by 2 LED aiming lights.

Specifications

Key features

• Embedded hardware platform. Adopts an embedded hardware platform for high-speed image processing.
• Built-in high-precision algorithms. Built-in high-precision positioning, measurement and recognition algorithms for counting, defect detection, presence/absence and positioning functions.
• Multi-protocol communication. Supports RS-232, TCP, UDP, FTP, Modbus, PROFINET, EtherNet/IP and other communication modes.
• Rich I/O interfaces. Adopts multiple I/O interfaces for input and output signals.
• 360° indicator. A 360° visible indicator supports real-time status monitoring from any angle, easing commissioning and maintenance.
• Rotatable cable tail. Rotatable cable tail design, suitable for narrow installation spaces.
• Multi-layer optical lighting. Polarised, diffuser and fully-transparent optical lighting options provide good adaptability to varying environmental conditions.
• IP67 protection. IP67 protection allows confident use in harsh industrial environments.

Where it is used

Stepping the focal length up to 16 mm markedly narrows the field of view, suiting this variant to stations where the camera must be mounted farther from the target yet still needs to resolve fine detail within a small area. In mounting locations with restricted access, where the camera cannot sit close to the line or product, this optical geometry is preferred for inspection steps that must distinguish small features even from a distance. Final suitability should be verified on site and confirmed on a project basis.

Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.