HIKROBOT MV-CH650-90XM-F-NF — Area Scan Cameras
65 MP, Gpixel GMAX3265, CXP-6, Mono, 31.5 fps
The MV-CH650-90XM-F-NF is the F-mount counterpart of the 65 MP monochrome camera in the CXP-6 branch. Its Gpixel GMAX3265 global shutter CMOS sensor (9344 × 7000, 3.2 μm × 3.2 μm, 29.9 mm × 22.4 mm) yields 31.5 fps in a 9216 × 7000 window; the 40 dB SNR, 66 dB dynamic range, 14 μs–10 s exposure and 1.25x–6x gain range match the M58 sibling. The difference lies entirely in the optical interface: an F-mount with 46.5 mm flange focal length enables the use of F-mount lenses designed for the large sensor and extends the fan-cooled body to 76.4 mm in depth.
The camera transfers data over CoaXPress with DIN interface and follows the CoaXPress protocol and the GenICam standard. For triggering the 12-pin P10 connector provides Line 0 opto-isolated input, Line 1 opto-isolated output, Line 2 bi-directional non-isolated I/O and one RS-232; supply is 9–24 VDC with a typical 10.5 W at 24 VDC. The F-mount fan-cooled body measures 74 mm × 74 mm × 76.4 mm and weighs about 500 g; with a suitable lens and wiring it carries IP40 protection together with a 0–50 °C working temperature range.
Specifications
| CH Series — High Resolution | |
|---|---|
| Model | MV-CH650-90XM-F-NF |
| Performance | |
| Sensor type | CMOS, global shutter |
| Sensor model | Gpixel GMAX3265 |
| Pixel size | 3.2 μm × 3.2 μm |
| Sensor size | 29.9 mm × 22.4 mm |
| Resolution | 9344 × 7000 |
| Max. frame rate | 31.5 fps @ 9216 × 7000 |
| Dynamic range | 66 dB |
| SNR | 40 dB |
| Gain | 1.25x to 6x |
| Exposure time | 14 μs to 10 sec |
| Exposure mode | Off/Once/Continuous exposure mode |
| Mono/color | Mono |
| Pixel format | Mono 8/10/12 |
| Binning | Supports 1 ×1, 1 × 2, 1 × 4, 2 × 1, 2 × 2, 2 × 4, 4 × 1, 4 × 2, 4 × 4 |
| Decimation | Supports 1 ×1, 1 × 2, 1 × 4, 2 × 1, 2 × 2, 2 × 4, 4 × 1, 4 × 2, 4 × 4 |
| Reverse image | Supports horizontal and vertical reverse image output |
| Electrical feature | |
| Data interface | CoaXPress with DIN interface |
| Digital I/O | 12-pin P10 connector provides I/O: opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2), and RS-232 × 1. |
| Power supply | 9 VDC to 24 VDC |
| Power consumption | Typ. 10.5 W @ 24 VDC |
| Mechanical | |
| Lens mount | F-mount, flange focal length 46.5 mm |
| Dimension | F-mount with fan: 74 mm × 74 mm × 76.4 mm (2.9″ × 2.9″ × 3.0″) |
| Weight | F-mount with fan: approx. 500 g (1.1 lb.) |
| Ingress protection | IP40 (under proper lens installation and wiring) |
| Temperature | Working temperature: 0 °C to 50 °C (32 °F to 122 °F) Storage temperature: –30 °C to 70 °C (–22 °F to 158 °F) |
| Humidity | 20% RH to 95% RH (no condensation) |
| General | |
| Client software | Frame grabber software meeting with CoaXPress Protocol |
| Operating system | 32/64-bit Windows 7/10, 64-bit Windows 11 with 8 GB memory or above |
| Compatibility | CoaXPress, GenlCam |
| Certification | CE, RoHS, KC |
| HIKROBOT part no. | SM000040427 |
| Status | Available |
Key features
- Resolution of 9344 × 7000, and pixel size of 3.2 µm × 3.2 µm.
- Adopts global shutter CMOS to provide high dynamic range, SNR, and high-quality image.
- Adopts CXP-6 interface to transmit data.
- Compatible with CoaXPress Protocol and GenICam Standard.
Where it is used
The F-mount makes this 31.5 fps monochrome camera a fit for measurement and inspection stations that image large parts from a distance with a wide angle: edge and hole position measurement on wide sheet and plate cutting lines, surface and geometry control on large castings and machine parts, full-field defect scanning in display and solar panel production. The global shutter and 14 μs minimum exposure provide sharp edge data on moving stages too. Grey-level output keeps processing load low for contrast-based measurement.
Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.
Is this camera right for your application?
Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.
The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Source: HIKROBOT product data