HIKROBOT MV-CH6040-10XM-M72-NF — Area Scan Cameras
604 MP, Sony IMX411, CXP-6, Mono, 1.45 fps
The MV-CH6040-10XM-M72-NF is the highest-resolution mono model in the CH series high-resolution family, at 604 MP. Its Sony IMX411 rolling-shutter CMOS sensor, with 3.76 µm pixels, delivers 28416 × 21280 resolution; given this pixel count, full-frame speed tops out at 1.45 fps. It supports both 151 MP and 604 MP modes via an ISP algorithm, and its 46.4 dB SNR and 78.7 dB dynamic range are the highest noise/dynamic-range figures in the series.
Unlike the other CH CoaXPress cameras in this set, this model uses a DIN-connector CoaXPress (CXP-6) interface; the 12-pin P10 connector supplies 24 VDC power together with one opto-isolated input, one opto-isolated output, one bidirectional non-isolated I/O and an RS-232 line. Power draw is typ. 15 W, among the lowest in the series. FFC and LSC correction combine with 16-bit ADC output for high-precision sampling, in a housing with an M72×0.75 lens mount measuring 100×100×128.5 mm — deeper than the 152/245 MP models.
Specifications
| CH Series — High Resolution | |
|---|---|
| Model | MV-CH6040-10XM-M72-NF |
| Performance | |
| Sensor type | CMOS, rolling shutter |
| Sensor model | Sony® IMX411 |
| Pixel size | 3.76 μm × 3.76 μm |
| Sensor size | 66.7 mm |
| Resolution | 28416 × 21280 |
| Max. frame rate | 1.45 fps @ 28416 × 21280 Mono 8 |
| Dynamic range | 78.7 dB |
| SNR | 46.4 dB |
| Gain | 0 dB to 40 dB |
| Exposure time | 15 μs to 1 sec |
| Exposure mode | Off/Once/Continuous exposure mode, supports Rolling and Global Reset |
| Mono/color | Mono |
| Pixel format | Mono 8/10/12/16 |
| Binning | Supports 1 × 1, 1 × 2, 1 × 4, 2 × 1, 2 × 2, 2 × 4, 4 × 1, 4 × 2, 4 × 4 |
| Decimation | Not supported |
| Reverse image | Supports horizontal reverse image output |
| Electrical feature | |
| Data interface | CoaXPress with DIN interface |
| Digital I/O | 12-pin P10 connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2), and RS-232 × 1 |
| Power supply | 24 VDC |
| Power consumption | Typ. 15 W @ 24 VDC |
| Mechanical | |
| Lens mount | M72*0.75, back focal length 19.55 mm |
| Dimension | 100 mm × 100 mm × 128.5 mm (3.9″ × 3.9″ × 5.1″) |
| Weight | Approx. 1.4 kg (3.1 lb.) |
| Ingress protection | IP40 (under proper lens installation and wiring) |
| Temperature | Performance temperature: 20 °C to 35 °C (68 °F to 95 °F) Working temperature: 0 °C to 50 °C (32 °F to 122 °F) Storage temperature: –30 °C to 80 °C (–22 °F to 176 °F) |
| Humidity | 20% RH to 95% RH (no condensation) |
| General | |
| Client software | Frame grabber software meeting with CoaXPress Protocol |
| Operating system | 32/64-bit Windows 7/10, 64-bit Windows 11, 32/64-bit Linux |
| Compatibility | CoaXPress, GenlCam |
| Certification | CE, RoHS, KC |
| HIKROBOT part no. | SM000084059 |
| Status | Available |
Key features
- Resolution of 28416 × 21280, pixel size of 3.76 µm × 3.76 µm.
- Supports 151 and 604 MP mode and adopts ISP algorithm to improve image quality.
- Adopts rolling shutter CMOS sensor to provide high dynamic range and low noise.
- Supports FFC correction and LSC correction.
- Supports 16-bit ADC output with high-precision sampling.
- Adopts CXP-6 interface to transmit data.
- Compatible with CoaXPress Protocol and GenICam Standard, and third-party software based on the protocol and standard.
Where it is used
The 604 MP resolution with dual 151/604 MP mode support suits applications that need very large PCB, panel, or print surfaces captured in full detail within a single frame, without stitching. Its speed, capped at 1.45 fps, points this model toward static or offline high-resolution capture scenarios rather than fast-moving production lines. The series’ highest SNR and dynamic-range figures give it an edge in precision measurement and mapping-style inspection tasks that demand fine detail.
Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.
Is this camera right for your application?
Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.
The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Source: HIKROBOT product data