HIKROBOT MV-CH250-90GM — Area Scan Cameras
25 MP, Gpixel GMAX0505, GigE, Mono, 4.5 fps
The MV-CH250-90GM is the monochrome GigE entry in the CH series high-resolution family, built around the 1.1-inch Gpixel GMAX0505 global shutter CMOS sensor. Its 5120 × 5120 array with 2.5 μm × 2.5 μm pixels captures a wide field in a single frame while keeping fine structure resolvable. With 36 dB SNR, 63 dB dynamic range, a 0 dB to 24 dB gain span and exposure from 12 μs to 10 seconds, the camera delivers 4.5 fps at full resolution in Mono 8, a rate intended for inspection stations where detail outweighs cycle speed.
On the network side the camera runs over Gigabit Ethernet with a maximum transmission distance of 100 meters without a relay and remains compatible with Fast Ethernet. PoE support means a single cable can carry both data and the typical 3.1 W at 12 VDC, while the 6-pin P7 connector adds an opto-isolated input (Line 0), an opto-isolated output (Line 1) and a bi-directional non-isolated line (Line 2) for hardware trigger, software trigger or free-run operation. The C-mount housing measures 29 mm × 44 mm × 59 mm, weighs roughly 100 g, carries mounting holes on both panels and is rated IP40 with proper lens and cable installation; GigE Vision V2.0 and GenICam compliance keep it open to MVS and third-party software.
Specifications
| CH Series — High Resolution | |
|---|---|
| Model | MV-CH250-90GM |
| Performance | |
| Sensor type | CMOS, global shutter |
| Sensor model | Gpixel GMAX0505 |
| Pixel size | 2.5 μm × 2.5 μm |
| Sensor size | 1.1″ |
| Resolution | 5120 × 5120 |
| Max. frame rate | 4.5 fps @ 5120 × 5120 Mono 8 |
| Dynamic range | 63 dB |
| SNR | 36 dB |
| Gain | 0 dB to 24 dB |
| Exposure time | 12 μs to 10 sec |
| Exposure mode | Off/Once/Continuous exposure mode |
| Mono/color | Mono |
| Pixel format | Mono 8/10/10Packed/12/12Packed |
| Binning | Supports 1 × 1, 2 × 2, 4 × 4 |
| Decimation | Supports 1 × 1, 2 × 2, 4 × 4 |
| Reverse image | Supports horizontal and vertical reverse image output |
| Electrical feature | |
| Data interface | Gigabit Ethernet (1000 Mbit/s), compatible with Fast Ethernet (100 Mbit/s) |
| Digital I/O | 6-pin P7 connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2). |
| Power supply | 9 VDC to 24 VDC, supports PoE |
| Power consumption | Typ. 3.1 W @ 12 VDC |
| Mechanical | |
| Lens mount | C-mount |
| Dimension | 29 mm × 44 mm × 59 mm (1.1″ × 1.7″ × 2.3″) |
| Weight | Approx. 100 g (0.2 lb.) |
| Ingress protection | IP40 (under proper lens installation and wiring) |
| Temperature | Working temperature: 0 °C to 50 °C (32 °F to 122 °F) Storage temperature: –30 °C to 80 °C (–22 °F to 176 °F) |
| Humidity | 20% RH to 95% RH (no condensation) |
| General | |
| Client software | MVS or third-party software meeting with GigE Vision Protocol |
| Operating system | 32/64-bit Windows 7/10, 64-bit Windows 11, and 32/64-bit Linux |
| Compatibility | GigE Vision V2.0, GenlCam |
| Certification | CE, RoHS, KC |
| HIKROBOT part no. | SM000046986 |
| Status | Available |
Key features
- Resolution of 5120 × 5120, pixel size of 2.5 µm × 2.5 µm.
- Supports binning, reverse image output and LSC. Compatible with C-mount lenses.
- Easy and flexible installation, with mounting holes on both panels of the camera.
- Adopts GigE interface and max. transmission distance of 100 meters without relay.
- Supports hardware trigger, software trigger, free run, etc.
- Compatible with GigE Vision V2.0 Protocol, GenICam Standard, and third-party software based on the protocol and standard.
Where it is used
A 5120 × 5120 square sensor lets one camera cover what would otherwise take several lower-resolution units: dimensional measurement across a large part, single-shot inspection of multi-cavity moulded parts, or component and solder checks on wide PCB panels. The 4.5 fps rate fits stations that image at fixed or indexed positions, such as scratch and contamination scans on glass and flat panels or fine registration checks on printing plates and stencils. Binning support allows the same camera to trade resolution for speed or sensitivity when a task calls for it.
Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.
Is this camera right for your application?
Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.
The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Source: HIKROBOT product data