HIKROBOT MV-CH250-20CM-M58S-NN — Area Scan Cameras
25 MP, OnSemi PYTHON25K, Camera Link, Mono, 31.3 fps
The MV-CH250-20CM-M58S-NN is the 25 MP option in the CH series for installations that prefer a Camera Link interface: its OnSemi PYTHON25K global shutter CMOS sensor outputs 5120 × 5120 in Mono 8 at 31.3 fps. The 4.5 μm pixels and 23 × 23 mm sensor area provide 41 dB SNR and 59 dB dynamic range, with a 0–32 dB gain range and 45 μs to 10 s exposure. The fanless body is compact and low-profile at 70 × 70 × 44.3 mm.
The Camera Link connection uses an SDR connector and supports the Full and 80-bit configuration modes; the Camera Link connector also carries the CC1–CC4 control signals. The 12-pin P10 connector provides 9–24 VDC power (typically 9.4 W at 24 VDC), an opto-isolated input and output, a bi-directional line and RS-232. The M58×0.75 mount has an 11.48 mm flange back length; mounting holes on the roughly 380 g IP40 body allow flexible placement. Camera Link V2.0 and GenICam compliance are specified.
Specifications
| CH Series — High Resolution | |
|---|---|
| Model | MV-CH250-20CM-M58S-NN |
| Performance | |
| Sensor type | CMOS, global shutter |
| Sensor model | OnSemi PYTHON25K |
| Pixel size | 4.5 μm × 4.5 μm |
| Sensor size | 23 mm × 23 mm |
| Resolution | 5120 × 5120 |
| Configuration mode | Full, 80-bit |
| Tap geometry | 8X_1Y, 10X_1Y |
| Tap number | 8 Taps, 10 Taps |
| Max. frame rate | 31.3 fps @ 5120 × 5120 |
| Pixel clock | 60 MHz, 70 MHz, 85 MHz |
| Dynamic range | 59 dB |
| SNR | 41 dB |
| Gain | 0 dB to 32 dB |
| Exposure time | 45 μs to 10 sec |
| Mono | Mono |
| Pixel format | Mono 8 |
| Exposure mode | Off/Once/Continuous exposure mode |
| Binning | Not support |
| Decimation | Not support |
| Reverse image | Supports horizontal and vertical reverse image output |
| Electrical feature | |
| Data interface | Camera Link with SDR interface |
| Digital I/O | 12-pin P10 connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2), RS-232 × 1; Camera Link connector provides I/O (CC1/CC2/CC3/CC4). |
| Power supply | 9 VDC to 24 VDC |
| Power consumption | Typ. 9.4 W @ 24 VDC |
| Mechanical | |
| Lens mount | M58*0.75, flange back length 11.48 mm |
| Dimension | 70 mm × 70 mm × 44.3 mm (2.8″ × 2.8″ × 1.7″) |
| Weight | Approx. 380 g (0.8 lb.) |
| Ingress protection | IP40 (under proper lens installation and wiring) |
| Temperature | Working temperature: 0 °C to 50 °C (32 °F to 122 °F) Storage temperature: –30 °C to 70 °C (–22 °F to 158 °F) |
| Humidity | 20% RH to 95% RH (no condensation) |
| General | |
| Client software | MVS or frame grabber software meeting with GenlCam Protocol |
| Operating system | 32/64-bit Windows 7/10, 64-bit Windows 11 |
| Compatibility | Camera Link V2.0, GenlCam |
| Certification | CE, RoHS, KC |
| HIKROBOT part no. | SM000032336 |
| Status | Available |
Key features
- Resolution of 5120 × 5120 and pixel size of 4.5 μm × 4.5 μm.
- Adopts global shutter CMOS sensor providing wide dynamic range and high-quality image.
- Supports configuration modes of Full and 80-bit via the Camera Link interface.
- Adopts compact design with mounting holes for flexible mounting.
Where it is used
It fits systems that want to bring existing Camera Link-based image processing up to 25 MP: static dimensional measurement of large parts, defect inspection on glass and sheet surfaces, and wide-area printed circuit and panel checks. 31.3 fps is adequate for stations that work with triggered capture, and the CC1–CC4 lines allow trigger and control signals to be issued directly over Camera Link.
Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.
Is this camera right for your application?
Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.
The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Source: HIKROBOT product data