HIKROBOT MV-CH120-90Y1C-NN — Area Scan Cameras
12 MP, Gpixel GMAX3412, 1-link CXP-12, Color, 93.9 fps
The MV-CH120-90Y1C-NN reduces the GMAX3412-based color CoaXPress camera to its smallest form: no fan, no heat sink, 29 mm × 29 mm × 42 mm and roughly 90 g. With Bayer GB 8/10/12 output it reaches 93.9 fps at 4096 × 3072; the 3.4 μm × 3.4 μm pixels, 39 dB SNR, 59.7 dB dynamic range and exposure down to 6 μs are retained. The heat-sink-free build keeps the working temperature within 0 °C to 40 °C; the -NH version with heat sink exists for warmer surroundings.
Connection is over a single CXP-12 link with a Micro-BNC connector; since PoCXP is supported, power may be delivered over the coaxial cable, otherwise the 12 VDC to 24 VDC input is used with a typical draw of 5 W at 12 VDC. For trigger and signalling the 6-pin P7 connector carries Line 0 (opto-isolated input), Line 1 (opto-isolated output) and Line 2 (bi-directional non-isolated); Off, Once and Continuous exposure modes can be selected. The C-mount body has IP40 protection, and CoaXPress and GenICam compliance lets it be recognised directly in standards-based third-party software.
Specifications
| CH Series — High Resolution | |
|---|---|
| Model | MV-CH120-90Y1C-NN |
| Performance | |
| Sensor type | CMOS, global shutter |
| Sensor model | Gpixel GMAX3412 |
| Pixel size | 3.4 μm × 3.4 μm |
| Sensor size | 1.1″ |
| Resolution | 4096 × 3072 |
| Max. frame rate | 93.9 fps @ 4096 × 3072 Bayer GB 8 |
| Dynamic range | 59.7 dB |
| SNR | 39 dB |
| Gain | 0 dB to 6.1 dB |
| Exposure time | 6 μs to 10 sec |
| Exposure mode | Off/Once/Continuous exposure mode |
| Mono/color | Color |
| Pixel format | Bayer GB 8/10/12 |
| Binning | Supports 1 × 1, 1 × 2, 1 × 4, 2 ×1, 2 × 2, 2 × 4, 4 × 1, 4 × 2, 4 × 4 |
| Decimation | Supports 1 × 1, 1 × 2, 1 × 4, 2 ×1, 2 × 2, 2 × 4, 4 × 1, 4 × 2, 4 × 4 |
| Reverse image | Supports horizontal and vertical reverse image output |
| Electrical feature | |
| Data interface | CoaXPress with Micro-BNC interface |
| Digital I/O | 6-pin P7 connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2) |
| Power supply | 12 VDC to 24 VDC, supports PoCXP |
| Power consumption | Typ. 5 W @ 12 VDC |
| Mechanical | |
| Lens mount | C-mount |
| Dimension | Device with heat sink: 29 mm × 85 mm × 42 mm (1.1″ × 3.3″ × 1.7″) Device without heat sink: 29 mm × 29 mm × 42 mm (1.1″ × 1.1″ × 1.7″) |
| Weight | Device with heat sink: Approx. 170 g (0.4 lb.) Device without heat sink: Approx. 90 g (0.2 lb.) |
| Ingress protection | IP40 (under proper lens installation and wiring) |
| Temperature | Working temperature for device with heat sink: 0 °C to 50 °C (32 °F to 122 °F) Working temperature for device without heat sink: 0 °C to 40 °C (32 °F to 104 °F) Storage temperature: –30 °C to 80 °C (–22 °F to 176 °F) |
| Humidity | 20% RH to 95% RH (no condensation) |
| General | |
| Client software | MVS or third-party software meeting with CoaXPress Protocol |
| Operating system | 32/64-bit Windows 7/10, 64-bit Window 11, and 32/64-bit Linux |
| Compatibility | CoaXPress, GenlCam |
| Certification | CE, RoHS, KC |
| HIKROBOT part no. | SM000088895 |
| Status | Available |
Key features
- Resolution of 4096 × 3072, pixel size of 3.4 µm × 3.4 µm.
- Adopts global shutter CMOS sensor to provide high dynamic range, SNR, and high-quality image.
- Adopts CXP-12 interface to transmit data.
- Supports Off, Once, and Continuous exposure modes.
- Compatible with CoaXPress Protocol, GenICam Standard, and third-party software based on the protocol and standard.
Where it is used
The light, small body allows easy placement in multi-camera stations where color is inspected from several angles and in robot-carried color check rigs. The 93.9 fps color stream is used for label/print quality, cap and seal color checks and colored-component verification on fast lines. With a 40 °C upper limit, it is preferred for air-conditioned production areas and laboratory-style high-speed imaging setups.
Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.
Is this camera right for your application?
Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.
The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Source: HIKROBOT product data