HIKROBOT MV-CH100-60GC — Area Scan Cameras

10 MP, Stacked BSI, GigE, Color, 11.6 fps

HIKROBOT MV-CH100-60GC

Status: Available

HIKROBOT part no.: SM000050980

Request a quote and stock check

The MV-CH100-60GC is the color GigE member of the CH high-resolution family at the 10 MP class. Its 1-inch Stacked BSI CMOS sensor with global shutter and 3.45 μm pixels delivers 4096 × 2460 at 11.6 fps in Bayer GR 8. An SNR of 43 dB together with 58.2 dB dynamic range are the figures that matter where wide scenes must be captured with faithful color and low noise.

Gigabit Ethernet allows cable runs of up to 100 meters without a relay and remains backward compatible with Fast Ethernet. PoE support lets a single cable carry data and power, or the camera can be fed from 9–24 VDC; typical consumption is 3.0 W at 12 VDC. The 6-pin P7 connector provides one opto-isolated input, one opto-isolated output and one bi-directional line; the 29 × 44 × 59 mm, 92 g housing takes C-mount lenses, and GigE Vision V2.0 / GenICam compliance opens it to third-party software.

Specifications

CH Series — High Resolution
ModelMV-CH100-60GC
Performance
Sensor typeCMOS, global shutter
Pixel size3.45 μm × 3.45 μm
Sensor modelStacked BSI
Sensor size1″
Resolution4096 × 2460
Max. frame rate11.6 fps @ 4096 × 2460 Bayer GR 8
Dynamic range58.2 dB
SNR43 dB
Gain0 dB to 24 dB
Exposure time80 μs to 10 sec
Exposure modeOff/Once/Continuous exposure mode
Mono/colorColor
Pixel formatMono 8/10/12,
Bayer GR 8/10/10Packed/12/12Packed, YUV422Packed, YUV422_YUYV_Packed,
RGB 8, BGR 8
BinningSupports 1 × 1, 2 × 2, 4 × 4
DecimationSupports 1 × 1, 2 × 2, 4 × 4
Reverse imageSupports horizontal and vertical reverse image output
Electrical feature
Data interfaceGigabit Ethernet (1000 Mbit/s), compatible with Fast Ethernet (100 Mbit/s)
Digital I/O6-pin P7 connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2).
Power supply9 VDC to 24 VDC, supports PoE
Power consumptionTyp. 3.0 W @ 12 VDC
Mechanical
Lens mountC-mount
Dimension29 mm × 44 mm × 59 mm (1.1″ × 1.7″ × 2.3″)
WeightApprox. 92 g (0.2 lb.)
Ingress protectionIP40 (under proper lens installation and wiring)
TemperatureWorking temperature: –10 °C to 50 °C (14 °F to 122 °F)
Storage temperature: –30 °C to 70 °C (–22 °F to 158 °F)
Humidity20% RH to 95% RH (no condensation)
General
Client softwareMVS or third-party software meeting with GigE Vision Protocol
Operating system32/64-bit Windows 7/10, 64-bit Windows 11, and 32/64-bit Linux
CompatibilityGigE Vision V2.0, GenlCam
CertificationCE, RoHS, KC
HIKROBOT part no.SM000050980
StatusAvailable

Key features

  • Supports auto or manual adjustment of gain, exposure time, white balance, LUT, Gamma correction, etc.
  • Adopts GigE interface and max. transmission distance of 100 meters without relay.
  • Compatible with GigE Vision V2.0 Protocol, GenICam Standard, and third-party software based on the protocol and standard.

Where it is used

Color 10 MP imaging covers a wide field in one frame while preserving fine detail: packaging and label print inspection, sorting of multi-colored products and missing-part or wrong-color checks on assembly lines are typical uses. The 11.6 fps rate suits stationary or moderately paced stations, and the long cable reach makes it easy to place the camera far from the cabinet and PC.

Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.

Is this camera right for your application?

Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.

Request a quote Other models in the series

The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.

Source: HIKROBOT product data

← CH Series — High Resolution