HIKROBOT MV-CH089-10UM — Area Scan Cameras
8.9 MP, Sony IMX267, USB3.0, Mono, 32 fps
The MV-CH089-10UM is the USB3.0 variant of the HIKROBOT 8.9 MP monochrome CH-series camera: same 1-inch Sony IMX267 global-shutter sensor and 4096 × 2160 resolution, but with 32 fps in Mono 8, well above the GigE model, plus 40.1 dB SNR and 72.5 dB dynamic range. Gain adjusts from 0 to 20 dB, and exposure covers 1–14 μs in UltraShort mode and 15 μs to 10 s in standard mode. HIKROBOT lists it under delisting preparation.
It is powered through the USB 3.0 port (typ. 3.27 W at 5 VDC) or from 12 VDC, and M2 screw holes on the housing lock the USB cable in place; USB 2.0 hosts are also supported. The 6-pin Hirose connector provides an opto-isolated input (Line 0), opto-isolated output (Line 1) and a bi-directional non-isolated line (Line 2), with hardware, software and free-run triggering. Auto and manual gain and exposure, LUT and Gamma correction are built in; the 44 × 29 × 59 mm, 100 g C-mount body is rated IP30 and complies with USB3 Vision and GenICam.
Specifications
| CH Series — High Resolution | |
|---|---|
| Model | MV-CH089-10UM |
| Performance | |
| Sensor type | CMOS, global shutter |
| Sensor model | Sony® IMX267 |
| Pixel size | 3.45 μm × 3.45 μm |
| Sensor size | 1″ |
| Resolution | 4096 × 2160 |
| Max. frame rate | 32 fps @ 4096 × 2160 Mono 8 32 fps @ 4096 × 2160 Bayer GR 8 |
| Dynamic range | 72.5 dB |
| SNR | 40.1 dB |
| Gain | 0 dB to 20 dB |
| Exposure time | UltraShort exposure mode: 1 μs to 14 μs Standard exposure mode: 15 μs to 10 sec |
| Exposure mode | Off/Once/Continuous exposure mode |
| Mono | Mono |
| Pixel format | Mono 8/10/10p/12/12p |
| Binning | Supports 1 × 1, 2 × 2, 4 × 4 |
| Decimation | Supports 1 × 1, 2 × 2, 4 × 4 |
| Reverse image | Supports horizontal and vertical reverse image output |
| Electrical feature | |
| Data interface | USB 3.0, compatible with USB 2.0 |
| Digital I/O | 6-pin Hirose connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1(Line 1), and bi-directional non-isolated I/O × 1 (Line 2) |
| Power supply | 12 VDC, supports USB 3.0 power supply |
| Power consumption | Typ. 3.27 W @ 5 VDC (USB 3.0 provides power supply) |
| Mechanical | |
| Lens mount | C-mount |
| Dimension | 44 mm × 29 mm × 59 mm (1.7″ × 1.1″ × 2.3″) |
| Weight | Approx. 100 g (0.2 lb.) |
| Ingress protection | IP30 (under proper lens installation and wiring) |
| Temperature | Working temperature: 0 °C to 50 °C (32 °F to 122 °F) Storage temperature: –30 °C to 70 °C (–22 °F to 158 °F) |
| Humidity | 20% RH to 80% RH (no condensation) |
| General | |
| Client software | MVS or third-party software meeting with USB3.0 Vision Protocol |
| Operating system | 32/64-bit Windows 7/10, 64-bit Windows 11, and 32/64-bit Linux |
| Compatibility | USB3 Vision, GenlCam |
| Certification | CE, RoHS, KC |
| HIKROBOT part no. | SM000025515 |
| Status | Being discontinued |
Key features
- Supports auto and manual adjustment for gain, exposure control, LUT, Gamma correction, etc.
- Supports hardware triggering, software triggering and free run mode.
- Adopts M2 screw holes for securing cable that connects USB3.0 interface.
- Compatible with USB3 Vision Protocol, GenICam Standard, and the third-party software based on these protocol and standard.
Where it is used
The 32 fps rate at 8.9 MP with USB bus power suits compact, PC-adjacent stations: benchtop measurement and gauging fixtures, semiconductor and display inspection rigs, and laboratory or metrology systems where a single cable to a nearby host is preferred. The 72.5 dB dynamic range and 40.1 dB SNR support fine gray-level defect detection on glass, film and metal surfaces, and the wide frame captures long objects such as connector strips or blister packs in one image.
Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.
Is this camera right for your application?
Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.
The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Source: HIKROBOT product data