HIKROBOT MV-SC3060XC-16M-WBN — Smart Cameras & Vision Sensors

The MV-SC3060XC-16M-WBN is the longest-focal-length member of the 6.0 MP colour SC3000X family; its 16 mm M12 lens gives the narrowest field of view and longest working distance of the three, backed by mechanical motorised focus. The sensor is CMOS rolling shutter, 2 µm × 2 µm pixels, 1/2.4″ optical format, 3200 × 1920 resolution, up to 20 fps. Gain is 0 dB – 33 dB, exposure 540 µs – 200 ms; pixel format is Mono 8 and RGB 8. The lens cover is semi-polarised, with transparent or fully polarised options available; optional red/blue/infrared/ultraviolet illumination supplements the white light source. This focal length is preferred for stations where the camera must sit farther from the target.

Blob, edge, contour, pattern, circle and line presence detection, anomaly detection, and blob/edge/contour/pattern/learning-based/colour counting are all part of this model’s vision toolset too. Communication runs over RS-232, TCP, UDP, FTP, PROFINET, Modbus, EtherNet/IP, MELSEC/SLMP, FINS, Keyence KV and a Fast Ethernet (100 Mbit/s) interface, with up to 32 programs supported. The 12-pin M12 connector offers 3 opto-isolated inputs (LINE0/1/2), 3 opto-isolated outputs (LINE3/4/5) and 1 RS-232 line; top-button triggering is also possible. Power is 12–24 VDC, with average 6.6 W / maximum 22 W consumption when built-in illumination is on. The body is 80.1 × 43 × 43.5 mm flat-angle / 58.5 × 43 × 64.6 mm right-angle, approx. 190 g, IP67-rated, with a 360° indicator and a 2-LED aiming light.

Specifications

Key features

• Embedded hardware platform. Adopts an embedded hardware platform for high-speed image processing.
• Built-in high-precision algorithms. Built-in high-precision positioning, measurement and recognition algorithms for counting, defect detection, presence/absence and positioning functions.
• Multi-protocol communication. Supports RS-232, TCP, UDP, FTP, Modbus, PROFINET, EtherNet/IP and other communication modes.
• Rich I/O interfaces. Adopts multiple I/O interfaces for input and output signals.
• 360° indicator. A 360° visible indicator supports real-time status monitoring from any angle, easing commissioning and maintenance.
• Rotatable cable tail. Rotatable cable tail design, suitable for narrow installation spaces.
• Multi-layer optical lighting. Polarised, diffuser and fully-transparent optical lighting options provide good adaptability to varying environmental conditions.
• IP67 protection. IP67 protection allows confident use in harsh industrial environments.

Where it is used

The 16 mm focal length gives the series’ narrowest field of view and longest working distance; it suits stations where the camera must be kept physically farther from the target, or where small details need to be magnified for colour inspection. The 2-LED aiming light still assists alignment at that longer range. It should be evaluated for project-specific applications with distance constraints.

Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.