HIKROBOT MV-CS200-10GM — Area Scan Cameras
20 MP, Sony IMX183, GigE, Mono, 5.9 fps
The MV-CS200-10GM is the highest-resolution camera in this group: a 1-inch Sony IMX183 rolling-shutter CMOS sensor with 2.4 μm pixels delivers 5472 × 3648 (20 MP) monochrome images. Over GigE it reaches 5.9 fps at full frame, complemented by 41.5 dB SNR, 65.7 dB dynamic range, 0–24 dB gain and 46 μs to 2.5 s exposure. HIKROBOT labels this model as the Basic variant in the CS series, and the 1-inch format means a larger optical area in the same 29 mm cross-section body.
The Gigabit Ethernet link extends up to 100 metres without a relay and is compatible with Fast Ethernet; PoE support removes the need for a separate power line. On this model a 6-pin Hirose connector supplies 9–24 VDC, an opto-isolated input (Line 0), an opto-isolated output (Line 1) and a bi-directional Line 2; typical consumption is 2.4 W at 12 VDC. The 29 × 29 × 42 mm, roughly 100 g C-mount body mounts from four sides, and besides GigE Vision V2.0 and GenICam compliance it offers gain, exposure, LUT and Gamma adjustment and ISP functions such as CCM.
Specifications
| CS Series — Small & Medium Resolution | |
|---|---|
| Model | MV-CS200-10GM |
| Performance | |
| Sensor type | CMOS, rolling shutter |
| Sensor model | Sony® IMX183 |
| Pixel size | 2.4 μm × 2.4 μm |
| Sensor size | 1″ |
| Resolution | 5472 × 3648 |
| Max. frame rate | 5.9 fps @ 5472 × 3648 |
| SNR | 41.5 dB |
| Gain | 0 dB to 24 dB |
| Exposure time | 46 μs to 2.5 sec |
| Exposure mode | Off/Once/Continuous exposure auto, supports Timed and Trigger Width exposure mode, and Rolling and Global Reset sensor shutter mode |
| Mono | Mono |
| Pixel format | Mono 8/10/10p/12/12p |
| Binning | Supports 1 × 1, 2 × 2, 4 × 4 |
| Decimation | Supports 1 × 1, 2 × 2 |
| Reverse image | Supports horizontal and vertical reverse image output |
| Electrical feature | |
| Data interface | Gigabit Ethernet, compatible with Fast Ethernet |
| Digital I/O | 6-pin Hirose connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2). |
| Power supply | 9 VDC to 24 VDC, supports PoE |
| Power consumption | Typ. 2.4 W@12 VDC |
| Mechanical | |
| Lens mount | C-mount |
| Dimension | 29 mm × 29 mm × 42 mm (1.1″ × 1.1″ × 1.2″) |
| Weight | Approx. 100 g (0.22 lb.) |
| Ingress protection | IP40 (under proper lens installation and wiring) |
| Temperature | Working temperature: –30 °C to 60 °C (–22 °F to 140 °F) Storage temperature: –30 °C to 70 °C (–22 °F to 158 °F) |
| Humidity | 20% RH to 95% RH (no condensation) |
| General | |
| Client software | MVS or third-party software meeting with GigE Vision Protocol |
| Operating system | 32/64-bit Windows 7/10, 32/64-bit Linux |
| Compatibility | GigE Vision V2.0, GenICam |
| Certification | CE, RoHS, KC |
| EMVA data（typical） | |
| Quantum efficiency | 74.1% |
| Dark noise | 6.6 e-@10-bit |
| Signal-to-noise ratio | 41.4 dB |
| Saturation capacity | 13.8 ke- |
| Dynamic range | 65.7 dB |
| HIKROBOT part no. | SM000033984 |
| Status | Available |
Key features
- Supports auto or manual adjustment of gain, exposure time, white balance, LUT, Gamma correction, etc.
- Supports multiple ISP functions like CCM to provide high-quality images.
- Compact design with mounting holes on panels for flexible mounting from 4 sides.
- Adopts GigE interface and max. transmission distance of 100 meters without relay.
- Compatible with GigE Vision V2.0 Protocol, GenICam Standard, and third-party software based on the protocol and standard.
Where it is used
A 20 MP frame is the address for high-precision measurement over a wide area: single-shot inspection of large PCBs, edge and hole measurement on sheet metal and glass plates, pixel-level checks of flat panels and displays. At 5.9 fps it makes sense on stations with longer cycle times where measurement accuracy comes first, and exposure up to 2.5 seconds also enables low-light scientific imaging. Because of the rolling shutter the object is expected to remain still during exposure.
Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.
Is this camera right for your application?
Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.
The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Source: HIKROBOT product data