HIKROBOT MV-CS120-10GM V5 — Area Scan Cameras
12 MP, Sony IMX226, GigE, Mono, 10 fps
The MV-CS120-10GM V5 is the GigE monochrome entry in the 12 MP class of the CS series small and medium resolution family. Its 1/1.7-inch Sony IMX226 CMOS sensor delivers 4024 × 3036 pixels at a 1.85 μm pitch with rolling-shutter readout. A 42.3 dB SNR and 69.4 dB dynamic range pair with 10 fps at full resolution, aimed at measurement tasks that depend on fine grey-level separation.
Gigabit Ethernet carries image data up to 100 metres without a relay, and the port remains compatible with Fast Ethernet networks. The 6-pin P7 connector combines 9–24 VDC power with one opto-isolated input (Line 0), one opto-isolated output (Line 1) and a bi-directional non-isolated line (Line 2); PoE support reduces the installation to a single cable. The 29 × 29 × 42 mm body weighs about 100 g, accepts C-mount lenses and follows GigE Vision V2.0 and GenICam, so third-party software built on those standards can drive it directly.
Specifications
| CS Series — Small & Medium Resolution | |
|---|---|
| Model | MV-CS120-10GM V5 |
| Performance | |
| Sensor type | CMOS, rolling shutter |
| Sensor model | Sony® IMX226 |
| Pixel size | 1.85 μm × 1.85 μm |
| Sensor size | 1/1.7” |
| Resolution | 4024 × 3036 |
| Max. frame rate | 10 fps @ 4024 × 3036 Mono 8 |
| Dynamic range | 69.4 dB |
| SNR | 42.3 dB |
| Gain | 0 dB to 20 dB |
| Exposure time | 33 μs to 2 sec |
| Exposure mode | Off/Once/Continuous exposure mode, and supports Rolling and Global Reset mode |
| Mono/color | Mono |
| Pixel format | Mono 8/10/10Packed/12/12Packed |
| Binning | Supports 1 × 1, 2 × 2, 4 × 4 |
| Decimation | Supports 1 × 1, 2 × 2, 4 × 4 |
| Reverse image | Supports horizontal and vertical reverse image output |
| Electrical feature | |
| Data interface | Gigabit Ethernet (1000 Mbit/s), compatible with Fast Ethernet (100 Mbit/s) |
| Digital I/O | 6-pin P7 connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2) |
| Power supply | 9 VDC to 24 VDC, supports PoE |
| Power consumption | Typ. 1.5 W @ 12 VDC |
| Mechanical | |
| Lens mount | C-mount |
| Dimension | 29 mm × 29 mm × 42 mm (1.1″ × 1.1″ × 1.7″) |
| Weight | Approx. 100 g (0.2 lb.) |
| Ingress protection | IP40 (under proper lens installation and wiring) |
| Temperature | Working temperature: –30 °C to 60 °C (–22 °F to 140 °F) Storage temperature: –30 °C to 80 °C (–22 °F to 176 °F) |
| Humidity | 20% RH to 95% RH (no condensation) |
| General | |
| Client software | MVS or third-party software meeting with GigE Vision Protocol |
| Operating system | 32/64-bit Windows 7/10, 64-bit Windows 11, and 32/64-bit Linux |
| Compatibility | GigE Vision V2.0, GenICam |
| Certification | CE, RoHS, KC |
| HIKROBOT part no. | SM000092525 |
| Status | Available |
Key features
- Provides optimized hardware design, stable performance, and low power consumption.
- Supports auto or manual adjustment of gain, exposure time, etc.
- Supports hardware triggers, software triggers, and free run mode.
- Adopts GigE interface and max. transmission distance of 100 meters without relay.
- Compatible with GigE Vision V2.0 Protocol, GenICam Standard, and third-party software based on the protocol and standard.
Where it is used
Twelve megapixels let the camera cover a wide field of view without losing small features, which suits dimensional measurement, PCB assembly verification and pin or solder-joint inspection. Because the sensor reads out with a rolling shutter, it performs best on indexed stop-and-go stations and on stationary parts. The –30 °C to 60 °C working range adds headroom for lines where the camera enclosure is not climate-controlled.
Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.
Is this camera right for your application?
Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.
The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Source: HIKROBOT product data