HIKROBOT MV-CS060-10UM-PRO — Area Scan Cameras
6 MP, Sony IMX178, USB3.0, Mono, 59.6 fps
The MV-CS060-10UM-PRO, the 6 MP PRO monochrome model in the USB3.0 branch of the CS series, is assembled using active alignment techniques and combines an image compression mode with a noise reduction function. Its Sony® IMX178 rolling shutter CMOS sensor (1/1.8″, 2.4 μm pixels) was chosen for high sensitivity, wide dynamic range and low noise, delivering 59.6 fps at 3072 × 2048 with a 41.3 dB SNR and 66.2 dB dynamic range. Exposure is adjustable from 32 μs to 1 second and gain from 0 to 24 dB.
The USB3.0 interface is compatible with USB2.0; when the camera is powered from the USB3.0 port, typical consumption is 2.3 W at 5 VDC, and a 9–24 VDC external supply is also supported. The 6-pin Hirose connector delivers the supply together with an opto-isolated input (Line 0), an opto-isolated output (Line 1) and a bi-directional non-isolated I/O (Line 2). The 29 × 29 × 30 mm, roughly 80 g C-mount housing with four-sided mounting holes is rated IP40 and operates from –30 °C to 60 °C; USB3 Vision and GenICam compliance allows integration with third-party software based on those standards.
Specifications
| CS Series — Small & Medium Resolution | |
|---|---|
| Model | MV-CS060-10UM-PRO |
| Performance | |
| Sensor type | CMOS, rolling shutter |
| Sensor model | Sony® IMX178 |
| Pixel size | 2.4 μm × 2.4 μm |
| Sensor size | 1/1.8″ |
| Resolution | 3072 × 2048 |
| Max. frame rate | 59.6fps @ 3072 × 2048 |
| SNR | 41.3 dB |
| Gain | 0 dB to 24 dB |
| Exposure time | 32 us to 1 sec |
| Exposure mode | Off/Once/Continuous exposure mode, supports Global Reset, Trigger Rolling, and Rolling |
| Binning | Supports 1 × 1, 2 × 2 |
| Decimation | Supports 1 × 1, 2 × 2, 4 × 4 |
| Reverse image | Supports horizontal and vertical reverse image output |
| Electrical feature | |
| Data interface | USB3.0, compatible with USB2.0 |
| Digital I/O | 6-pin Hirose connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2). |
| Power supply | 9 VDC to 24 VDC, supports USB3.0 power supply |
| Power consumption | Typ. 2.3 W@5 VDC (USB3.0 provides power supply) |
| Mechanical | |
| Lens mount | C-mount |
| Dimension | 29 mm × 29 mm × 30 mm (1.1″ × 1.1″ × 1.2″) |
| Weight | Approx. 80 g (0.18 lb.) |
| Ingress protection | IP40 (under proper lens installation and wiring) |
| Temperature | Working temperature: –30 °C to 60 °C (–22 °F to 140 °F) Storage temperature: –30 °C to 70 °C (–22 °F to 158 °F) |
| Humidity | 20% RH to 95% RH (no condensation) |
| General | |
| Client software | MVS or third-party software meeting with USB3.0 Vision Protocol |
| Operating system | 32/64-bit Windows 7/10, 64-bit Windows 11, 32/64-bit Linux |
| Compatibility | USB3 Vision, GenlCam |
| Certification | CE, RoHS, KC |
| EMVA data（typical） | |
| Quantum efficiency | 71.7% |
| Dark noise | 6.2e-@10-bit |
| Signal-to-noise ratio | 41.4 dB |
| Saturation capacity | 13.6 ke- |
| Dynamic range | 66.2 dB |
| HIKROBOT part no. | SM000032784 |
| Status | Available |
Key features
- Adopts brand new design to reduce power consumption.
- Compact design with mounting holes on panels for flexible mounting from 4 sides.
- Adopts Sony® IMX178 sensor to provide high sensitivity, wide dynamic range, and low noise.
- Supports image compression mode and noise reduction function.
- Adopts active alignment techniques for assembling.
- Compatible with USB3 Vision Protocol, GenICam Standard, and the third-party software based on the protocol and standard.
Where it is used
Precise sensor-to-lens alignment from active alignment addresses dimensional measurement and calibrated imaging applications that demand consistent sharpness even at the corners of the field of view: precision part measurement, glass and wafer edge inspection, optical component checks. 59.6 fps monochrome imaging keeps up with simultaneous multi-part inspection in high-speed production cells. Low-light performance combined with noise reduction provides stability in surface defect analysis under short-exposure strobe lighting.
Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.
Is this camera right for your application?
Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.
The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Source: HIKROBOT product data