HIKROBOT MV-CS050-90GC — Area Scan Cameras
5 MP, GMAX3405, GigE, Color, 24.2 fps
The color member of the GMAX3405-based GigE pair, the MV-CS050-90GC runs its 2/3-inch global shutter CMOS in Bayer GB 8 at 2448 × 2048 and 24.2 fps, with a 3.4 μm pixel pitch. YUV422, RGB 8 and BGR 8 are also offered through on-camera conversion, and the 39.4 dB SNR, 66 dB dynamic range and 0–24 dB gain range are shared with its monochrome sibling. Having a 2 μs–4 μs UltraShort exposure mode in a color camera makes it possible to capture color information together with very short light pulses.
The Gigabit Ethernet interface (Fast Ethernet compatible) supports 100 m without a relay and powers the camera over the network via PoE; typical consumption is 2.3 W at 12 VDC, and 9–24 VDC external supply is also possible through the P7 connector. White balance, gain, exposure, contrast and Gamma can be set automatically or manually, while the opto-isolated input (Line 0), opto-isolated output (Line 1) and bi-directional Line 2 take care of triggering and synchronisation. The roughly 100 g, 29 × 29 × 42 mm C-mount body mounts from four sides and works with software built on GigE Vision V2.0 and GenICam.
Specifications
| CS Series — Small & Medium Resolution | |
|---|---|
| Model | MV-CS050-90GC |
| Performance | |
| Sensor type | CMOS, global shutter |
| Sensor model | GMAX3405 |
| Pixel size | 3.4 μm × 3.4 μm |
| Sensor size | 2/3″ |
| Resolution | 2448 × 2048 |
| Max. frame rate | 24.2 fps @ 2448 × 2048 Bayer GB 8 |
| Dynamic range | 66 dB |
| SNR | 39.4 dB |
| Gain | 0 dB to 24 dB |
| Exposure time | UltraShort exposure mode: 2 μs to 4 μs Standard exposure mode: 5 μs to 10 sec |
| Exposure mode | Off/Once/Continuous exposure mode |
| Mono/color | Color |
| Pixel format | Mono 8/10/12, Bayer GB 8/10/10Packed/12/12Packed, YUV422Packed, YUV422_YUYV_Packed, RGB 8, BGR 8 |
| Binning | Supports 1 × 1, 2 × 2, 4 × 4 |
| Decimation | Supports 1 × 1, 2 × 2, 4 × 4 |
| Reverse image | Supports horizontal and vertical reverse image output |
| Electrical feature | |
| Data interface | Gigabit Ethernet (1000 Mbit/s), compatible with Fast Ethernet (100 Mbit/s) |
| Digital I/O | 6-pin P7 connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2). |
| Power supply | 9 VDC to 24 VDC, supports PoE |
| Power consumption | Typ. 2.3 W @ 12 VDC |
| Mechanical | |
| Lens mount | C-mount |
| Dimension | 29 mm × 29 mm × 42 mm (1.1″ × 1.1″ × 1.7″) |
| Weight | Approx. 100 g (0.2 lb.) |
| Ingress protection | IP40 (under proper lens installation and wiring) |
| Temperature | Working temperature: –30 °C to 60 °C (–22 °F to 140 °F) Storage temperature: –30 °C to 80 °C (–22 °F to 176 °F) |
| Humidity | 20% RH to 95% RH (no condensation) |
| General | |
| Client software | MVS or third-party software meeting with GigE Vision Protocol |
| Operating system | 32/64-bit Windows 7/10, 64-bit Windows 11, and 32/64-bit Linux |
| Compatibility | GigE Vision V2.0, GenICam |
| Certification | CE, RoHS, KC |
| HIKROBOT part no. | SM000079780 |
| Status | Available |
Key features
- Adopts brand new design to reduce power consumption.
- Supports auto or manual adjustment for gain, exposure control, white balance, contrast ratio, Gamma correction, etc.
- Compact design with mounting holes on panels for flexible mounting from 4 sides.
- Adopts GigE interface and max. transmission distance of 100 meters without relay.
- Compatible with GigE Vision V2.0 Protocol, GenICam Standard, and third-party software based on the protocol and standard.
Where it is used
Color imaging with microsecond exposure suits fast liquid processes such as inkjet printing and spray coating, where color and droplet shape are observed at the same time. Reading colored marks and codes on rotating drums, classifying fast-passing colored parts on a belt, and surface color checks performed under a short flash are further uses. 100 m over Ethernet and PoE make it easy to position this camera in multi-camera installations connected to a central server in large plants.
Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.
Is this camera right for your application?
Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.
The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Source: HIKROBOT product data