HIKROBOT MV-CA023-10UM — Area Scan Cameras
2.3 MP, Sony IMX249, USB3.0, Mono, 41 fps
The MV-CA023-10UM runs the same IMX249 sensor over USB3.0, matching its GigE sibling’s 41 fps, but it is the lightest and least power-hungry of all ten models here: 56 g at a typical 2.5 W. The mono output is aimed at tasks that need low-light sensitivity rather than color rendition. HIKROBOT has placed this model in Delisting Preparation.
It draws typ. 2.5 W @5 VDC from the USB3.0 bus, with 12 VDC external power also supported. The I/O set matches the other USB3.0 models, and M2 screw holes secure the cable. Hardware triggering, software triggering and free-run mode are all available. USB3 Vision/GenICam compliance lets it work directly with the MVS client or GenICam-based third-party software; the 29×29×30 mm housing carries its lightest-in-class status into its physical size as well.
Specifications
| CA Series — Area Scan | |
|---|---|
| Model | MV-CA023-10UM |
| Performance | |
| Sensor type | CMOS, global shutter |
| Sensor model | Sony® IMX249 |
| Pixel size | 5.86 μm × 5.86 μm |
| Sensor size | 1/1.2″ |
| Resolution | 1920 × 1200 |
| Max. frame rate | 41 fps @1920 × 1200 |
| Dynamic range | 70 dB |
| SNR | 40 dB |
| Gain | 0 dB to 20 dB |
| Exposure time | 34 μs to 10 sec |
| Exposure mode | Off/Once/Continuous exposure mode |
| Mono | Mono |
| Pixel format | Mono 8/10/10p/12/12p |
| Binning | Supports 1 × 1, 1 × 2, 1 × 4, 2 × 1, 2 × 2, 2 × 4, 4 × 1, 4 × 2, 4 × 4 |
| Decimation | Supports 1 × 1, 1 × 2, 1 × 4, 2 × 1, 2 × 2, 2 × 4, 4 × 1, 4 × 2, 4 × 4 |
| Reverse image | Supports horizontal and vertical reverse image output |
| Electrical feature | |
| Data interface | USB3.0, compatible with USB2.0 |
| Digital I/O | 6-pin Hirose connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1(Line 1), and bi-directional non-isolated I/O × 1 (Line 2) |
| Power supply | 12 VDC, supports USB 3.0 power supply |
| Power consumption | Typ. 2.5 W @ 5 VDC (USB3.0 provides power supply) |
| Mechanical | |
| Lens mount | C-mount |
| Dimension | 29 mm × 29 mm × 30 mm (1.1″ × 1.1″ × 1.2″) |
| Weight | Approx. 56 g (0.12 lb.) |
| Ingress protection | IP30 (under correct lens installation and wiring) |
| Temperature | Working temperature: 0 °C to 50 °C (32 °F to 122 °F) Storage temperature: –30 °C to 70 °C (–22 °F to 158 °F) |
| Humidity | 20% RH to 80% RH (no condensation) |
| General | |
| Client software | MVS or third-party software compatible with USB3 Vision Protocol |
| Operating system | 32/64-bit Windows 7/10, 32/64-bit Linux |
| Compatibility | USB3 Vision, GenlCam |
| Certification | CE, RoHS, KC |
| HIKROBOT part no. | SM000025427 |
| Status | Being discontinued |
Key features
- Supports auto and manual adjustment for gain, exposure control, LUT, Gamma correction, etc.
- Supports hardware triggering, software triggering and free run mode.
- Adopts M2 screw holes for securing cable that connects USB3.0 interface.
- Compatible with USB3 Vision Protocol, GenICam Standard, and the third-party software based on these protocol and standard.
Where it is used
Being the lightest, lowest-power model makes it a natural fit for robot-mounted, moving, or space-constrained stations; the large pixel and mono output suit assembly inspection and code-reading tasks that need edge/pattern detection under limited light. At 41 fps it keeps pace comfortably with moderate-speed lines.
Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.
Is this camera right for your application?
Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.
The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Source: HIKROBOT product data