HIKROBOT MV-CA004-10GM — Area Scan Cameras
0.4 MP, Sony IMX287, GigE, Mono, 312.9 fps
The MV-CA004-10GM is the mono, GigE, 0.4-megapixel model built on the Sony IMX287 global-shutter sensor, reaching 312.9 fps at 720×540. Its 41 dB SNR and 74 dB dynamic range give it a wider usable light range within this part of the series. HIKROBOT also lists this model under Delisting Preparation.
A wide 9–24 VDC input range plus PoE support accommodates varying cabinet power conditions, and the 6-pin Hirose connector provides one opto-isolated input, one opto-isolated output, and one bi-directional I/O line. Gain, exposure, white balance, LUT and Gamma correction all support auto/manual adjustment, cable runs of up to 100 m without a relay are supported, and up to 128 MB of local memory buffers burst transmission. GigE Vision V1.2 and GenICam compliance enable operation with the MVS client and third-party software.
Specifications
| CA Series — Area Scan | |
|---|---|
| Model | MV-CA004-10GM |
| Performance | |
| Sensor type | CMOS, global shutter |
| Sensor model | Sony® IMX287 |
| Pixel size | 6.9 μm × 6.9 μm |
| Sensor size | 1/2.9″ |
| Resolution | 720 × 540 |
| Max. frame rate | 312.9 fps @ 720 × 540 |
| Dynamic range | 74 dB |
| SNR | 41 dB |
| Gain | 0 dB to 20 dB |
| Exposure time | 1 μs to 10 sec |
| Exposure mode | Off/ Once/ Continuous exposure mode |
| Mono | Mono |
| Pixel format | Mono 8/10/10p/12/12p |
| Binning | Not support |
| Decimation | Not support |
| Reverse image | Supports horizontal and vertical reverse image |
| Image buffer | 128 MB |
| Electrical feature | |
| Data interface | Gigabit Ethernet, compatible with Fast Ethernet |
| Digital I/O | 6-pin Hirose connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2). |
| Power supply | 9 VDC to 24 VDC, supports PoE |
| Power consumption | Typ. 3.1 W @ 12 VDC |
| Mechanical | |
| Lens mount | C-mount |
| Dimension | 29 mm × 29 mm × 42 mm (1.1″ × 1.1″ × 1.7″) |
| Weight | Approx. 68 g (0.15 lb.) |
| Ingress protection | IP30 (under proper lens installation and wiring) |
| Temperature | Working temperature: 0 °C to 50 °C (32 °F to 122 °F) Storage temperature: –30 °C to 70 °C (–22 °F to 158 °F) |
| Humidity | 20% RH to 80% RH (no condensation) |
| General | |
| Client software | MVS or third-party software meeting with GigE Vision Protocol |
| Operating system | 32/64-bit Windows 7/10, 32/64-bit Linux |
| Compatibility | GigE Vision V1.2, GenlCam |
| Certification | CE, RoHS, KC |
| HIKROBOT part no. | SM000025436 |
| Status | Being discontinued |
Key features
- Adopts GigE interface and max. transmission distance of 100 meters without relay.
- Supports auto and manual adjustment for gain, exposure control, white balance, LUT, Gamma correction, etc.
- Up to 128 MB local memory for burst transmission and retransmission.
- Compatible with GigE Vision Protocol V1.2, GenICam standard and third-party software meeting with GigE Vision Protocol.
Where it is used
The wide 74 dB dynamic range suits monochrome quality inspection and object detection in scenes with both bright and shadowed areas. Speeds up to 312.9 fps support part verification and position checks on moderate-speed production lines. The wide power input range simplifies integration in facilities with varying cabinet infrastructure.
Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.
Is this camera right for your application?
Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.
The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Source: HIKROBOT product data