HIKROBOT MV-CA013-A0GM — Area Scan Cameras
1.3 MP, GigE, Mono, 92.8 fps
The MV-CA013-A0GM is one of the CA series’ 1.3-megapixel mono GigE models, reaching 92.8 fps at 1280×1024. The fact sheet does not name its sensor model; with a 4.8 μm pixel size and 1/2″ sensor format it delivers 40.6 dB SNR and 54 dB dynamic range — narrower than the PYTHON1300-based models at the same resolution. The model is listed under Delisting Preparation.
A wide 9–24 VDC input with PoE support gives this model a typical 2.3 W @ 12 VDC consumption, among the lower-power GigE models in the series. The same 6-pin Hirose I/O set (one opto-isolated input, one opto-isolated output, one bi-directional line) is provided, along with auto/manual gain and exposure adjustment, LUT/Gamma correction, hardware/software triggering, and free-run mode. GigE Vision V2.0 and GenICam compliance support cable runs of up to 100 m.
Specifications
| CA Series — Area Scan | |
|---|---|
| Model | MV-CA013-A0GM |
| Performance | |
| Sensor type | CMOS, global shutter |
| Pixel size | 4.8 μm |
| Sensor size | 1/2″ |
| Resolution | 1280 × 1024 |
| Max. frame rate | 92.8 fps @ 1280 × 1024 |
| Dynamic range | 54 dB |
| SNR | 40.6 dB |
| Gain | 0 dB to 16 dB |
| Exposure time | 9 μs to 10 sec |
| Exposure mode | Off/Once/Continuous exposure mode |
| Mono | Mono |
| Pixel format | Mono 8/10/10p/12/12p |
| Binning | Supports 1 × 1, 2 × 2, 4 × 4 |
| Decimation | Supports 1 × 1, 2 × 2, 4 × 4 |
| Reverse image | Supports horizontal and vertical reverse image output |
| Electrical feature | |
| Data interface | Gigabit Ethernet, compatible with Fast Ethernet |
| Digital I/O | 6-pin Hirose connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2). |
| Power supply | 9 VDC to 24 VDC, supports PoE |
| Power consumption | Typ. 2.3 W@12 VDC |
| Mechanical | |
| Lens mount | C-mount |
| Dimension | 29 mm × 29 mm × 42 mm (1.1″ × 1.1″ × 1.2″) |
| Weight | Approx. 100 g (0.22 lb.) |
| Ingress protection | IP30 |
| Temperature | Working temperature: 0 °C to 50 °C (32 °F to 122 °F) Storage temperature: –30 °C to 70 °C (–22 °F to 158 °F) |
| Humidity | 20% RH to 80% RH (no condensation) |
| General | |
| Client software | MVS or third-party software meeting with GigE Vision Protocol |
| Operating system | 32/64-bit Windows 7/10, 32/64-bit Linux |
| Compatibility | GigE Vision V2.0, GenICam |
| Certification | CE, RoHS, KC |
| HIKROBOT part no. | SM000035600 |
| Status | Being discontinued |
Key features
- Supports auto or manual adjustment of gain and exposure time, manual adjustment of LUT and Gamma correction, etc.
- Supports hardware trigger, software trigger and free run, etc.
- Adopts GigE interface and max. transmission distance of 100 meters without relay.
- Compatible with GigE Vision V2.0 Protocol, GenICam Standard, and third-party software based on the protocol and standard.
Where it is used
A 92.8 fps rate at 1.3 MP resolution suits general-purpose mono inspection, position checking, and entry-level dimensional measurement under stable, controlled lighting. The 54 dB dynamic range performs better in stations with stable light than in high-contrast scenes. Its lower power consumption can be an advantage in setups where several cameras are powered from the same cabinet.
Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.
Is this camera right for your application?
Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.
The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Source: HIKROBOT product data