HIKROBOT MV-CA023-10GM — Area Scan Cameras
2.3 MP, Sony IMX249, GigE, Mono, 41 fps
The MV-CA023-10GM runs Sony’s IMX249 global-shutter sensor at 1920×1200 over Gigabit Ethernet. Its 5.86 μm pixel size and 1/1.2″ optical format are the largest of the ten models here, giving it the strongest per-pixel light-gathering in the family. The mono output reaches 41 fps. HIKROBOT has marked this model as Delisting Preparation.
Power comes via PoE at 12 VDC, with the same 6-pin Hirose I/O layout (one opto-isolated input, one output, one bi-directional line) and both hardware and software triggering. The GigE link runs up to 100 m without a relay, and up to 128 MB of local memory buffers burst transfers. It complies with GigE Vision V2.0 / GenICam, and shares the C-mount, 29×29×42 mm, 68 g form factor with the other GigE models in this batch.
Specifications
| CA Series — Area Scan | |
|---|---|
| Model | MV-CA023-10GM |
| Performance | |
| Sensor type | CMOS, global shutter |
| Sensor model | Sony IMX249 |
| Pixel size | 5.86 μm × 5.86 μm |
| Sensor size | 1/1.2″ |
| Resolution | 1920 × 1200 |
| Max. frame rate | 41 fps @ 1920 × 1200 |
| Dynamic range | 70 dB |
| SNR | 40 dB |
| Gain | 0 dB to 20 dB |
| Exposure time | 34 μs to 10 sec |
| Exposure mode | Off/Once/Continuous exposure mode |
| Mono | Mono |
| Pixel format | Mono 8/10/10p/12/12p |
| Binning | Supports 1 × 1, 1 × 2, 2 × 1, 1 × 4, 4 × 1, 2 × 2, 2 × 4, 4 × 2, 4 × 4 |
| Decimation | Supports 1 × 1, 1 × 2, 2 × 1, 1 × 4, 4 × 1, 2 × 2, 2 × 4, 4 × 2, 4 × 4 |
| Reverse image | Supports horizontal and vertical reverse image output |
| Image buffer | 128 MB |
| Electrical feature | |
| Data interface | Gigabit Ethernet, compatible with Fast Ethernet |
| Digital I/O | 6-pin Hirose connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2). |
| Power supply | 12 VDC, supports PoE |
| Power consumption | Typ. 2.9 W@12 VDC |
| Mechanical | |
| Lens mount | C-mount |
| Dimension | 29 mm × 29 mm × 42 mm (1.1″ × 1.1″ × 1.7″) |
| Weight | Approx. 68 g (0.15 lb.) |
| Ingress protection | IP30 (under proper lens installation and wiring) |
| Temperature | Working temperature: 0 °C to 50 °C (32 °F to 122 °F) Storage temperature: –30 °C to 70 °C (–22 °F to 158 °F) |
| Humidity | 20% RH to 80% RH (no condensation) |
| General | |
| Client software | MVS or third-party software meeting with GigE Vision Protocol |
| Operating system | 32/64-bit Windows 7/10, 32/64-bit Linux |
| Compatibility | GigE Vision V2.0, GenICam |
| Certification | CE, RoHS, KC |
| HIKROBOT part no. | SM000025449 |
| Status | Being discontinued |
Key features
- Adopts GigE interface and max. transmission distance of 100 meters without relay.
- Supports auto and manual adjustment for exposure control, LUT, Gamma correction, etc.
- Up to 128 MB local memory for burst transmission and retransmission.
- Supports hardware trigger, software trigger, etc.
- Compatible with GigE Vision Protocol V2.0, GenICam Standard, and third-party software based on these protocol and standard.
Where it is used
The large pixel and sensor size help preserve image quality in dim lighting or with a stopped-down lens, making this camera a candidate for general assembly-line inspection, code reading and robot guidance at moderate speeds where light is limited. The mono output suits contrast- and edge-based measurement tasks.
Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.
Is this camera right for your application?
Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.
The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Source: HIKROBOT product data