HIKROBOT MV-CA023-10GC — Area Scan Cameras
2.3 MP, Sony IMX249, GigE, Color, 41 fps
The MV-CA023-10GC carries the same IMX249 sensor, 1920×1200 resolution and 41 fps as its mono sibling GM, but with a color output. At 5.86 μm the pixel size is among the largest in this family, and that light-gathering advantage matters more on a color sensor, where the Bayer filter already costs some sensitivity. This model falls under HIKROBOT’s Delisting Preparation status.
Power again comes via PoE at 12 VDC, with typical consumption of 3.1 W — slightly higher than the mono GM. The I/O layout, GigE cable reach and memory buffering are identical to GM. A broad pixel-format list including Bayer RG 8/10/12, YUV422 and RGB/BGR 8 gives color-processing flexibility, and it complies with GigE Vision V2.0/GenICam in the same 29×29×42 mm, 68 g housing.
Specifications
| CA Series — Area Scan | |
|---|---|
| Model | MV-CA023-10GC |
| Performance | |
| Sensor type | CMOS, global shutter |
| Sensor model | Sony IMX249 |
| Pixel size | 5.86 μm × 5.86 μm |
| Sensor size | 1/1.2″ |
| Resolution | 1920 × 1200 |
| Max. frame rate | 41 fps @ 1920 × 1200 |
| Dynamic range | 70 dB |
| SNR | 40 dB |
| Gain | 0 dB to 20 dB |
| Exposure time | 34 μs to 10 sec |
| Exposure mode | Off/Once/Continuous exposure mode |
| Mono | Color |
| Pixel format | Mono 8/10/12, Bayer RG 8/10/10p/12/12p, YUV422Packed, YUV422_YUYV_Packed, RGB 8, BGR 8 |
| Binning | Supports 1 × 1, 1 × 2, 2 × 1, 1 × 4, 4 × 1, 2 × 2, 2 × 4, 4 × 2, 4 × 4 |
| Decimation | Supports 1 × 1, 1 × 2, 2 × 1, 1 × 4, 4 × 1, 2 × 2, 2 × 4, 4 × 2, 4 × 4 |
| Reverse image | Supports horizontal and vertical reverse image output |
| Image buffer | 128 MB |
| Electrical feature | |
| Data interface | Gigabit Ethernet, compatible with Fast Ethernet |
| Digital I/O | 6-pin Hirose connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2). |
| Power supply | 12 VDC, supports PoE |
| Power consumption | Typ. 3.1 W@12 VDC |
| Mechanical | |
| Lens mount | C-mount |
| Dimension | 29 mm × 29 mm × 42 mm (1.1″ × 1.1″ × 1.7″) |
| Weight | Approx. 68 g (0.15 lb.) |
| Ingress protection | IP30 (under proper lens installation and wiring) |
| Temperature | Working temperature: 0 °C to 50 °C (32 °F to 122 °F) Storage temperature: –30 °C to 70 °C (–22 °F to 158 °F) |
| Humidity | 20% RH to 80% RH (no condensation) |
| General | |
| Client software | MVS or third-party software meeting with GigE Vision Protocol |
| Operating system | 32/64-bit Windows 7/10, 32/64-bit Linux |
| Compatibility | GigE Vision V2.0, GenICam |
| Certification | CE, RoHS, KC |
| HIKROBOT part no. | SM000025448 |
| Status | Being discontinued |
Key features
- Adopts GigE interface and max. transmission distance of 100 meters without relay.
- Supports auto and manual adjustment for exposure control, LUT, Gamma correction, etc.
- Up to 128 MB local memory for burst transmission and retransmission.
- Supports hardware trigger, software trigger, etc.
- Compatible with GigE Vision Protocol V2.0, GenICam Standard, and third-party software based on these protocol and standard.
Where it is used
The combination of color output and a large pixel suits print/label quality checks, color-based product sorting, and assembly-line stations that need color imaging under limited light. PoE’s single-cable advantage makes the GC model practical for longer cable runs on the line.
Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.
Is this camera right for your application?
Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.
The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Source: HIKROBOT product data