HIKROBOT MV-CA020-10GC — Area Scan Cameras

2 MP, Sony IMX430, GigE, Color, 60 fps

HIKROBOT MV-CA020-10GC

Status: Being discontinued

HIKROBOT part no.: SM000025444

Request a quote and stock check

The MV-CA020-10GC is a color CA-series camera built around Sony’s IMX430 global-shutter CMOS sensor at 1624×1240 resolution, connected over Gigabit Ethernet. At up to 60 fps it delivers a 43.8 dB SNR — the highest signal-to-noise figure among all ten models covered here. HIKROBOT has placed this model in Delisting Preparation status; availability should be confirmed on a per-project basis.

Power comes via PoE across a 9–24 VDC range, and the 6-pin Hirose connector exposes one opto-isolated input, one opto-isolated output and one bi-directional non-isolated I/O line, with both hardware and software triggering supported. The GigE link runs up to 100 m without a relay, and up to 128 MB of onboard memory buffers burst transmission and retransmission. It is compliant with GigE Vision V2.0 and GenICam, mounts via C-mount, and fits a compact 29×29×42 mm, 68 g housing.

Specifications

CA Series — Area Scan
ModelMV-CA020-10GC
Performance
Sensor typeCMOS, global shutter
Sensor modelSony® IMX430
Pixel size4.5 μm × 4.5 μm
Sensor size1/1.7″
Resolution1624 × 1240
Max. frame rate60 fps @ 1624 × 1240
Dynamic range72.08 dB
SNR43.8 dB
Gain0 dB to 24 dB
Exposure time1 μs to 10 sec
Exposure modeOff/Once/Continuous exposure mode
MonoColor
Pixel formatMono 8/10/12, RGB 8, BGR 8,
Bayer GB 8/10/10p/12/12p, YUV422Packed, YUV422_YUYV_Packed
BinningSupports 1 × 1, 2 × 2
DecimationSupports 1 × 1, 2 × 2
Reverse imageSupports horizontal and vertical reverse image output
Image buffer128 MB
Electrical feature
Data interfaceGigabit Ethernet, compatible with Fast Ethernet
Digital I/O6-pin Hirose connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2).
Power supply9 VDC to 24 VDC, supports PoE
Power consumptionTyp. 3.6 W@12 VDC
Mechanical
Lens mountC-mount
Dimension29 mm × 29 mm × 42 mm (1.1″ × 1.1″ × 1.7″)
WeightApprox. 68 g (0.15 lb.)
Ingress protectionIP30 (under proper lens installation and wiring)
TemperatureWorking temperature: 0 °C to 50 °C (32 °F to 122 °F)
Storage temperature: –30 °C to 70 °C (–22 °F to 158 °F)
Humidity20% RH to 80% RH (no condensation)
General
Client softwareMVS or third-party software meeting with GigE Vision Protocol
Operating system32/64-bit Windows 7/10, 32/64-bit Linux
CompatibilityGigE Vision V2.0, GenlCam
CertificationCE, RoHS, KC
HIKROBOT part no.SM000025444
StatusBeing discontinued

Key features

  • Adopts GigE interface and max. transmission distance of 100 meters without relay.
  • Supports auto and manual adjustment for exposure control, LUT, Gamma correction, etc.
  • Up to 128 MB local memory for burst transmission and retransmission.
  • Supports hardware trigger, software trigger, etc.
  • Compatible with GigE Vision Protocol V2.0, GenICam Standard, and third-party software based on these protocol and standard.

Where it is used

The combination of 1624×1240 resolution, 60 fps and color imaging suits color-based sorting, print/label inspection and part recognition on moderate-speed assembly lines. Because PoE carries both power and data over a single cable, mounting the camera in-line on a production cell requires less wiring.

Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.

Is this camera right for your application?

Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.

Request a quote Other models in the series

The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.

Source: HIKROBOT product data

← CA Series — Area Scan