HIKROBOT MV-CA016-10GM — Area Scan Cameras
1.6 MP, Sony IMX273, GigE, Mono, 78.2 fps
The MV-CA016-10GM is a mono area-scan camera built around Sony’s IMX273 sensor over a GigE interface. A 3.45 μm pixel size on a 1/2.9″ sensor reaches 78.2 fps at 1440 × 1080; its real distinguishing figure is a 71.4 dB dynamic range, among the widest in this segment of the CA series. The model is listed under HIKROBOT’s ‘Delisting Preparation’ status.
The GigE interface reaches up to 100 meters without a relay and stays compatible with Fast Ethernet; a 6-pin Hirose connector carries PoE power alongside the opto-isolated I/O set. Up to 128 MB of onboard memory buffers burst transmission and retransmission, reducing frame loss during network fluctuations. GigE Vision V2.0 and GenICam compliance support integration with MVS and third-party software.
Specifications
| CA Series — Area Scan | |
|---|---|
| Model | MV-CA016-10GM |
| Performance | |
| Sensor type | CMOS, global shutter |
| Sensor model | Sony® IMX273 |
| Pixel size | 3.45 μm × 3.45 μm |
| Sensor size | 1/2.9″ |
| Resolution | 1440 × 1080 |
| Max. frame rate | 78.2 fps @ 1440 × 1080 |
| Dynamic range | 71.4 dB |
| SNR | 41 dB |
| Gain | Gain 0 dB to 20 dB |
| Exposure time | 1 μs to 10 sec |
| Exposure mode | Off/ Once /Continuous exposure mode |
| Mono | Mono |
| Pixel format | Mono 8/10/10p/12/12p |
| Binning | Supports 1 × 1, 2 × 2 |
| Decimation | Supports 1 × 1, 2 × 2 |
| Reverse image | Supports horizontal and vertical reverse image output |
| Image buffer | 128 MB |
| Electrical feature | |
| Data interface | Gigabit Ethernet, compatible with Fast Ethernet |
| Digital I/O | 6-pin Hirose connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2). |
| Power supply | 9 VDC to 24 VDC, supports PoE |
| Power consumption | Typ. 3 W @ 12 VDC |
| Mechanical | |
| Lens mount | C-mount |
| Dimension | 29 mm × 29 mm × 42 mm (1.1″ × 1.1″ × 1.7″) |
| Weight | Approx. 68 g (0.15 lb) |
| Ingress protection | IP 30 (under proper lens installation and wiring) |
| Temperature | Working temperature: 0 °C to 50 °C (32 °F to 122 °F) Storage temperature: –30 °C to 70 °C (–22 °F to 158 °F) |
| Humidity | 20% RH to 80% RH (no condensation) |
| General | |
| Client software | MVS or third-party software meeting with GigE Vision Protocol |
| Operating system | 32/64-bit Windows 7/10, 32/64-bit Linux |
| Compatibility | GigE Vision V2.0, GenlCam |
| Certification | CE, RoHS |
| HIKROBOT part no. | SM000025443 |
| Status | Being discontinued |
Key features
- Adopts GigE interface and max. transmission distance of 100 meters without relay.
- Supports auto and manual adjustment for exposure control, LUT, Gamma correction, etc.
- Up to 128 MB local memory for burst transmission and retransmission.
- Supports hardware trigger, software trigger, etc.
- Compatible with GigE Vision Protocol V2.0, GenICam Standard, and third-party software based on these protocol and standard.
Where it is used
A 71.4 dB dynamic range helps on lines with uneven lighting or where both bright and dark regions must be read in the same frame – useful for PCB and electronic-component inspection. 1.6 MP resolution at 78.2 fps balances detail and throughput on mid-speed lines. The onboard memory buffer adds reliability on busy, multi-camera GigE networks.
Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.
Is this camera right for your application?
Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.
The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Source: HIKROBOT product data