HIKROBOT MV-CA016-10GC — Area Scan Cameras
1.6 MP, Sony IMX273, GigE, Color, 78.2 fps
The MV-CA016-10GC pairs the same IMX273 sensor with color output over GigE; it keeps the 78.2 fps at 1440 × 1080 and 71.4 dB dynamic range of its mono sibling, with a 41 dB SNR. Broad pixel-format support including Bayer RG and YUV variants gives flexibility on the color-processing side. This model is also under ‘Delisting Preparation’ status in HIKROBOT’s catalog.
Power draw stays at 3 W @ 12 VDC, matching the mono version; a 6-pin Hirose connector carries PoE power and the opto-isolated I/O set. The 128 MB onboard memory buffers burst transmission to preserve data integrity during network delays. GigE Vision V2.0 / GenICam compliance enables direct integration with third-party software.
Specifications
| CA Series — Area Scan | |
|---|---|
| Model | MV-CA016-10GC |
| Performance | |
| Sensor type | CMOS, global shutter |
| Sensor model | Sony® IMX273 |
| Pixel size | 3.45 μm × 3.45 μm |
| Sensor size | 1/2.9″ |
| Resolution | 1440 × 1080 |
| Max. frame rate | 78.2 fps @ 1440 × 1080 |
| Dynamic range | 71.4 dB |
| SNR | 41 dB |
| Gain | Gain 0 dB to 20 dB |
| Exposure time | 1 μs to 10 sec |
| Exposure mode | Off/ Once /Continuous exposure mode |
| Mono | Color |
| Pixel format | Mono8/10/12, Bayer RG 8/10/10p/12/12p YUV 422 Packed, YUV422_YUYV_Packed, RGB8 |
| Binning | Supports 1 × 1, 2 × 2 |
| Decimation | Supports 1 × 1, 2 × 2 |
| Reverse image | Supports horizontal and vertical reverse image output |
| Image buffer | 128 MB |
| Electrical feature | |
| Data interface | Gigabit Ethernet, compatible with Fast Ethernet |
| Digital I/O | 6-pin Hirose connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2). |
| Power supply | 9 VDC to 24 VDC, supports PoE |
| Power consumption | Typ. 3 W @ 12 VDC |
| Mechanical | |
| Lens mount | C-mount |
| Dimension | 29 mm × 29 mm × 42 mm (1.1″ × 1.1″ × 1.7″) |
| Weight | Approx. 68 g (0.15 lb) |
| Ingress protection | IP 30 (under proper lens installation and wiring) |
| Temperature | Working temperature: 0 °C to 50 °C (32 °F to 122 °F) Storage temperature: –30 °C to 70 °C (–22 °F to 158 °F) |
| Humidity | 20% RH to 80% RH (no condensation) |
| General | |
| Client software | MVS or third-party software meeting with GigE Vision Protocol |
| Operating system | 32/64-bit Windows 7/10, 32/64-bit Linux |
| Compatibility | GigE Vision V2.0, GenlCam |
| Certification | CE, RoHS |
| HIKROBOT part no. | SM000025442 |
| Status | Being discontinued |
Key features
- Adopts GigE interface and max. transmission distance of 100 meters without relay.
- Supports auto and manual adjustment for exposure control, LUT, Gamma correction, etc.
- Up to 128 MB local memory for burst transmission and retransmission.
- Supports hardware trigger, software trigger, etc.
- Compatible with GigE Vision Protocol V2.0, GenICam Standard, and third-party software based on these protocol and standard.
Where it is used
Combining color output with a wide dynamic range suits print/label color inspection and assembly lines with tight color tolerances. 1.6 MP resolution is enough to capture both color and shape detail on mid-sized parts. Single-cable PoE setup also reduces cabling complexity on multi-camera lines.
Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.
Is this camera right for your application?
Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.
The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Source: HIKROBOT product data