HIKROBOT MV-CA013-A0UM — Area Scan Cameras
1.3 MP, USB3.0, Mono, 201 fps
The MV-CA013-A0UM pairs the same 1280 × 1024 global-shutter CMOS sensor with a USB3.0 interface in mono output; unlike its GigE sibling, this variant’s headline number is a frame rate of up to 201 fps. With a 40 dB SNR and 53 dB dynamic range it forms the USB3.0 mono entry of the CA series. It is currently listed under ‘Delisting Preparation’ in HIKROBOT’s catalog.
The USB3.0 interface remains backward-compatible with USB2.0, and a 6-pin P7 connector carries both USB3.0 or PoE power together with an opto-isolated input/output pair and a bidirectional I/O line. Customizable ROI and horizontal/vertical image reversal let integrators offload some processing work to the camera itself. Compliance with USB3 Vision and GenICam means direct connectivity with the MVS client and compatible third-party software.
Specifications
| CA Series — Area Scan | |
|---|---|
| Model | MV-CA013-A0UM |
| Performance | |
| Sensor type | CMOS, global shutter |
| Pixel size | 4.8 μm × 4.8 μm |
| Sensor size | 1/2″ |
| Resolution | 1280 × 1024 |
| Max. frame rate | 201 fps @ 1280 × 1024 |
| Dynamic range | 53 dB |
| SNR | 40 dB |
| Gain | 0 dB to 16 dB |
| Exposure time | 9 μs to 10 sec |
| Exposure mode | Off/Once/Continuous exposure mode |
| Mono | Mono |
| Pixel format | Mono 8/10/10Packed/12/12Packed |
| Binning | Supports 1 × 1, 2 × 2, 4 × 4 |
| Decimation | Supports 1 × 1, 2 × 2, 4 × 4 |
| Reverse image | Supports horizontal and vertical reverse image output |
| Electrical feature | |
| Data interface | USB3.0, compatible with USB2.0 |
| Digital I/O | 6-pin P7 connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1(Line 1), and bi-directional non-isolated I/O × 1 (Line 2) |
| Power supply | 9 VDC to 24 VDC, supports USB3.0 power supply and PoE |
| Power consumption | Typ. 2.4 W@5 VDC (USB3.0 provides power supply) |
| Mechanical | |
| Lens mount | C-mount |
| Dimension | 29 mm × 29 mm × 30 mm (1.1″ × 1.1″ × 1.2″) |
| Weight | Approx. 80 g (0.18 lb.) |
| Ingress protection | IP30 (under proper lens installation and wiring) |
| Temperature | Working temperature: 0 °C to 50 °C (32 °F to 122 °F) Storage temperature: –30 °C to 70 °C (–22 °F to 158 °F) |
| Humidity | 20% RH to 95% RH (no condensation) |
| General | |
| Client software | MVS or third-party software meeting with USB3 Vision Protocol |
| Operating system | 32/64-bit Windows 7/10, 32/64-bit Linux |
| Compatibility | USB3 Vision, GenlCam |
| Certification | CE, RoHS, KC |
| HIKROBOT part no. | SM000035595 |
| Status | Being discontinued |
Key features
- Supports auto or manual adjustment of gain, exposure time, and manual adjustment of LUT, Gamma correction, etc.
- Supports customized ROI, horizontal and vertical reverse image output.
- Adopts compact design for flexible installation.
- Compatible with USB3 Vision Protocol, GenICam Standard, and third-party software based on the protocol and standard.
Where it is used
Its 201 fps ceiling suits timing-critical tasks on fast lines – object counting, presence checks and position detection. The mono sensor favors contrast-based measurement and defect detection work. Its compact 29 × 29 × 30 mm housing eases placement on high-speed lines with tight mounting space.
Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.
Is this camera right for your application?
Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.
The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Source: HIKROBOT product data