TELEMECANIQUE XT230A1PCM12 — Cylindrical Capacitive Sensors
Telemecanique XT230A1PCM12: Capacitive proximity sensor, M30, plastic, non-flush; Sn 15 mm, PNP NO+NC, M12 connector, 12–24 V DC.
Status: In production
Brand: Telemecanique
Product: Capacitive proximity sensor, M30, plastic body, non-flush
Nominal sensing distance (Sn): 15 mm
Output: PNP, 1 NO + 1 NC, 4-wire
Connection: M12 connector, 4 pins
Supply: 12–24 V DC
Degree of protection: IP67
The Telemecanique XT230A1PCM12 is a capacitive proximity sensor from the XT2 series with a cylindrical M30 threaded (M30 × 1.5) plastic body. According to the manufacturer it detects insulated or conductive materials. It is non-flush mountable; the nominal sensing distance is 15 mm and the assured operating distance (Sa) is 0–11 mm. The sensing distance is set with the potentiometer on the body within an adjustment zone of 0–17 mm. The output is a 4-wire PNP type providing both a normally open and a normally closed function (1 NO + 1 NC); the supply is 12–24 V DC.
Supply voltage limits are 10–30 V DC with reverse polarity and short-circuit protection. The switching frequency reaches 150 Hz, the maximum switching current is 400 mA, the voltage drop in the closed state is below 2.5 V and current consumption is below 25 mA. Connection is by a 4-pin male M12 connector, and a yellow LED shows the output state. The degree of protection is IP67 (double insulation, IEC 60529) and the operating temperature range is -10 °C to +60 °C. The fixing nut tightening torque is 8 N.m.
Telemecanique XT230A1PCM12 technical specifications
| General | |
|---|---|
| ISO thread | Cylindrical, M30 × 1.5 |
| Length | 74.5 mm (threaded length 48.5 mm) |
| Enclosure material | Plastic |
| Mounting | Non-flush mountable |
| Detection | |
| Detectable objects | Insulated or conductive materials |
| Nominal sensing distance (Sn) | 15 mm |
| Assured operating distance (Sa) | 0–11 mm |
| Adjustment zone | 0–17 mm |
| Sensitivity setting | By potentiometer |
| Differential travel (hysteresis) | < 1–20 % of Sr |
| Repeat accuracy | < 5 % of Sr |
| Switching frequency | ≤ 150 Hz |
| Electrical characteristics | |
| Rated supply voltage (Us) | 12–24 V DC, with reverse polarity protection |
| Supply voltage limits | 10–30 V DC |
| Current consumption | < 25 mA |
| Outputs and indicators | |
| Output type | PNP, 4-wire, DC, short-circuit protected |
| Output function | 1 NO + 1 NC |
| Maximum switching current | 400 mA |
| Maximum voltage drop (closed state) | < 2.5 V |
| Status LED | Output state: 1 yellow LED |
| Mechanical and connection | |
| Electrical connection | Male connector M12, 4 pins |
| Net weight | 0.15 kg |
| Tightening torque | 8 N.m (fixing nut) |
| Minimum mounting distances | Side by side ≥ 60 mm, face to face ≥ 90 mm, facing metal ≥ 45 mm; in support d ≥ 90 mm, h ≥ 30 mm |
| Environmental | |
| Degree of protection | IP67, double insulation (IEC 60529) |
| Operating temperature | -10 °C to +60 °C |
| Vibration resistance | 10 gn, amplitude 1 mm (f = 10–55 Hz), IEC 60068-2-6 |
| Shock resistance | 30 gn, 11 ms, IEC 60068-2-27 |
| Standards and certifications | IEC 60947-5-2; CE, cULus |
Key features
- Capacitive detection of insulated or conductive materials
- Sn 15 mm, Sa 0–11 mm, potentiometer adjustment (0–17 mm)
- PNP output, 1 NO + 1 NC, 4-wire, maximum 400 mA
- 12–24 V DC; reverse polarity and short-circuit protection
- M30 plastic body, M12 connector (4 pins)
- IP67 double insulation, IEC 60947-5-2
XT230A1PCM12 ordering codes
| Part number | Description |
|---|---|
| XT230A1PCM12 | PNP, 1 NO + 1 NC, 4-wire, M12 connector, 12–24 V DC |
| XT230A1PAL2 | PNP, 1 NO, 3-wire, 2 m cable, 12–24 V DC |
| XT230A1NAL2 | NPN, 1 NO, 3-wire, 2 m cable, 12–24 V DC |
| XT230A1FAL2 | 1 NO, 2-wire, 2 m cable, 24–240 V AC |
| XT230A1FBL2 | 1 NC, 2-wire, 2 m cable, 24–240 V AC |
XT230A1PCM12 accessories
Accessories listed by the manufacturer for this product (ordered separately):
| Part number | Description |
|---|---|
| XXZ30 | 90° fixing bracket for Ø30 mm sensors, metal |
Other Telemecanique Cylindrical Capacitive Sensors
- TELEMECANIQUE XT218A1PCM12 — Capacitive proximity sensor, M18, plastic body, non-flush
- TELEMECANIQUE XT218A1FAL2 — Capacitive proximity sensor, M18, plastic body, non-flush
- TELEMECANIQUE XT230A1FAL2 — Capacitive proximity sensor, M30, plastic body, non-flush
- TELEMECANIQUE XT518B1PAL2 — Capacitive proximity sensor, M18, brass body, flush
- TELEMECANIQUE XT518B1PCM12 — Capacitive proximity sensor, M18, brass body, flush
- TELEMECANIQUE XT530B1PAL2 — Capacitive proximity sensor, M30, brass body, flush
- TELEMECANIQUE XT132B1FAL2 — Capacitive proximity sensor, Ø32 mm plain cylindrical, brass, flush
Models from other brands: Cylindrical Capacitive Sensors
Is this capacitive sensor right for your application?
Share the material to be detected (liquid, powder, granules, plastic), the tank wall material and thickness, the required sensing distance, ambient conditions and your PLC input (PNP/NPN, NO/NC); let’s select the right capacitive sensor together.
All product specifications are subject to change without notice. Source: Telemecanique, XT230A1PCM12 product data sheet (30 July 2024), https://downloads.telemecaniquesensors.com/dam/datasheets/en/XT230A1PCM12_EN.pdf; product page https://www.telemecaniquesensors.com/global/en/product/reference/XT230A1PCM12 (accessed 28 September 2026).