HIKROBOT MV-CA013-20GM — Area Scan Cameras

1.3 MP, PYTHON1300, GigE, Mono, 90 fps

HIKROBOT MV-CA013-20GM

Status: Being discontinued

HIKROBOT part no.: SM000025440

Request a quote and stock check

The MV-CA013-20GM steps up to 1280×1024 (1.3 MP) resolution within the CA series, using the PYTHON1300 global-shutter sensor in its mono, GigE form and reaching 90 fps at that resolution. With 39.8 dB SNR and 59.6 dB dynamic range, it is among the models supporting the GigE Vision V2.0 protocol. This model is also listed under Delisting Preparation.

A 12 VDC power input with PoE support comes with the same 6-pin Hirose I/O set — one opto-isolated input, one opto-isolated output, one bi-directional line — and cable runs of up to 100 m without a relay are supported. Auto/manual adjustment of exposure, LUT and Gamma is available alongside hardware and software triggering, and up to 128 MB of local memory buffers burst transmission and retransmission. GigE Vision V2.0 and GenICam compliance give it broad integration with third-party software.

Specifications

CA Series — Area Scan
ModelMV-CA013-20GM
Performance
Sensor typeCMOS, global shutter
Sensor modelOnSemi PYTHON1300
Pixel size4.8 μm × 4.8 μm
Sensor size1/2″
Resolution1280 × 1024
Max. frame rate90 fps @ 1280 × 1024
Dynamic range59.6 dB
SNR39.8 dB
Gain0 dB to 15 dB
Exposure time38 μs to 10 sec
Exposure modeOff/Once/Continuous exposure mode
MonoMono
Pixel formatMono 8/10/10p/12/12p
BinningSupports 1 × 1, 1 × 2, 2 × 1, 1 × 4, 4 × 1, 2 × 2, 2 × 4, 4 × 2, 4 × 4
DecimationSupports 1 × 1, 2 × 2
Reverse imageSupports horizontal and vertical reverse image output
Image buffer128 MB
Electrical feature
Data interfaceGigabit Ethernet, compatible with Fast Ethernet
Digital I/O6-pin Hirose connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2).
Power supply12 VDC, supports PoE
Power consumptionTyp. 2.7 W @ 12 VDC
Mechanical
Lens mountC-mount
Dimension29 mm × 29 mm × 42 mm (1.1″ × 1.1″ × 1.7″)
WeightApprox. 68 g (0.15 lb.)
Ingress protectionIP30 (under proper lens installation and wiring)
TemperatureWorking temperature: 0 °C to 50 °C (32 °F to 122 °F)
Storage temperature: –30 °C to 70 °C (–22 °F to 158 °F)
Humidity20% RH to 80% RH (no condensation)
General
Client softwareMVS or third-party software meeting with GigE Vision Protocol
Operating system32/64-bit Windows 7/10, 32/64-bit Linux
CompatibilityGigE Vision V2.0, GenICam
CertificationCE, RoHS, KC
HIKROBOT part no.SM000025440
StatusBeing discontinued

Key features

  • Adopts GigE interface and max. transmission distance of 100 meters without relay.
  • Supports auto and manual adjustment for exposure control, LUT, Gamma correction, etc.
  • Up to 128 MB local memory for burst transmission and retransmission.
  • Supports hardware trigger, software trigger, etc.
  • Compatible with GigE Vision Protocol V2.0, GenICam Standard, and third-party software based on protocol and standard.

Where it is used

The 1280×1024 resolution suits monochrome applications needing finer detail, such as dimensional measurement, PCB/electronics inspection, and code reading. A 90 fps rate allows these higher-resolution checks to run in real time on moderate-speed lines. GigE’s long cable reach makes it easy to place the camera away from the control cabinet.

Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.

Is this camera right for your application?

Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.

Request a quote Other models in the series

The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.

Source: HIKROBOT product data

← CA Series — Area Scan