HIKROBOT MV-CH1510-10FM-M72-TF — Area Scan Cameras
151 MP, Sony IMX411, 10GigE over fiber, Mono, M72, TEC and fan
MV-CH1510-10FM-M72-TF pairs the same 151 MP IMX411 sensor with a 10GigE over Fiber interface, delivering 6.2 fps in Mono 8 at 14208 × 10640, with 45 dB SNR and a 78.8 dB dynamic range. The fiber link supports up to 300 m without a relay — well beyond copper 10GigE’s 100 m limit — a meaningful difference for setups where the camera sits far from the control cabinet. Gain spans 0–36 dB and exposure 30 μs to 10 s.
The camera combines both TEC and fan cooling; it is powered at 24 VDC, with typical consumption of 11.28 W with TEC off, rising to 48.96 W with cooling active. The 12-pin P10 connector carries opto-isolated input/output, a bidirectional line and RS-232. The 120 × 120 × 89 mm, roughly 2.5 kg body and the M72×0.75 lens mount (19.55 mm flange) come with GigE Vision V2.0/GenICam compliance supporting ISP functions such as Binning, LSC, Sequencer and FFC.
Specifications
| CH Series — High Resolution | |
|---|---|
| Model | MV-CH1510-10FM-M72-TF |
| Performance | |
| Sensor type | CMOS, rolling shutter |
| Sensor model | Sony® IMX411 |
| Pixel size | 3.76 μm × 3.76 μm |
| Sensor size | 66.7 mm |
| Resolution | 14208 × 10640 |
| Max. frame rate | 6.2 fps @ 14208 × 10640 Mono 8 |
| Dynamic range | 78.8 dB |
| SNR | 45 dB |
| Gain | 0 dB to 36 dB |
| Exposure time | 30 μs to 10 sec |
| Exposure mode | Off/Once/Continuous exposure mode, supports Rolling mode and Global Reset |
| Mono/color | Mono |
| Pixel format | Mono 8/10/10Packed/12/12Packed/16 |
| Binning | Supports 1 × 1, 1 × 2, 1 × 4, 2 ×1, 2 × 2, 2 × 4, 4 × 1, 4 × 2, 4 × 4 |
| Decimation | Supports 1 × 1, 1 × 2, 1 × 4, 2 ×1, 2 × 2, 2 × 4, 4 × 1, 4 × 2, 4 × 4 |
| Reverse image | Supports horizontal reverse image output |
| Electrical feature | |
| Data interface | 10 Gigabit Ethernet (10000 Mbit/s) |
| Digital I/O | 12-pin P10 connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2), RS-232 × 1 |
| Power supply | 24 VDC |
| Power consumption | Typ. 11.28 W @ 24 VDC (non-TEC mode) Typ. 48.96 W @ 24 VDC (TEC mode) |
| Mechanical | |
| Lens mount | M72*0.75, flange back length 19.55 mm |
| Dimension | 120 mm × 120 mm × 89 mm (4.7″ × 4.7″ × 3.5″) |
| Weight | Approx. 2.5 kg (5.5 lb.) |
| Ingress protection | IP40 (under proper lens installation and wiring) |
| Temperature | Working temperature: 0 °C to 50 °C (32 °F to 122 °F) Storage temperature: –30 °C to 70 °C (–22 °F to 158 °F) |
| Humidity | 20% RH to 95% RH (no condensation) |
| General | |
| Client software | MVS or third-party software meeting with GigE Vision Protocol |
| Operating system | 32/64-bit Windows 7/10, 64-bit Windows 11, and 32/64-bit Linux |
| Compatibility | GigE Vision V2.0, GenICam |
| Certification | CE, RoHS, KC |
| HIKROBOT part no. | SM000087193 |
| Status | Available |
Key features
- Supports Binning, LSC Sequencer, FFC and other ISP functions.
- Adopts 10GigE over Fiber interface to transmit data, and max. transmission distance reaches 300 m.
- Adopts TEC technology to reduce sensor temperature and ensure high-quality images under long-time exposure condition.
- Compatible with GigE Vision V2.0 Protocol, GenICam Standard, and third-party software based on the protocol and standard.
Where it is used
Fiber reach of up to 300 m combined with TEC-plus-fan dual cooling is built for high-resolution static measurement in large facilities where the camera sits far from the control room (wind-turbine blade inspection, extended production lines). Thermal stability during long exposures yields repeatable measurement results.
Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.
Is this camera right for your application?
Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.
The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Source: HIKROBOT product data