HIKROBOT MV-CH1510-11XM-M72-TF — Area Scan Cameras
151 MP, Sony IMX411, CoaXPress, Mono, M72, with TEC
MV-CH1510-11XM-M72-TF is one of the highest-resolution models in the CH series: a Sony IMX411 rolling-shutter sensor delivers 151 MP monochrome imaging at 14208 × 10640, with 46.4 dB SNR and a 78.7 dB dynamic range. The TEC-cooled housing limits sensor heating during long exposures (15 μs to 10 s); gain spans 0–30 dB and pixel format reaches Mono 8/10/12/16.
The CoaXPress interface runs on the CXP-6 line via a DIN connector; the 12-pin P10 connector carries opto-isolated input/output, a bidirectional line and RS-232. The TEC housing is 120 × 120 × 84.6 mm, roughly 1.9 kg, powered at 24 VDC, with typical consumption rising to 55 W with cooling on. The M72×0.75 lens mount has a 19.55 mm flange distance. CoaXPress and GenICam compliance work directly with protocol-compliant frame grabbers.
Specifications
| CH Series — High Resolution | |
|---|---|
| Model | MV-CH1510-11XM-M72-TF |
| Performance | |
| Sensor type | CMOS, rolling shutter |
| Sensor model | Sony® IMX411 |
| Pixel size | 3.76 μm × 3.76 μm |
| Sensor size | 66.7 mm |
| Resolution | 14208 × 10640 |
| Max. frame rate | 6.2 fps @ 14208 × 10640 |
| Dynamic range | 78.7 dB |
| SNR | 46.4 dB |
| Gain | 0 dB to 30 dB |
| Exposure time | 15 μs to 10 sec |
| Exposure mode | Off/Once/Continuous exposure mode, supports Global Reset, Rolling |
| Mono/color | Mono |
| Pixel format | Mono 8/10/12/16 |
| Binning | Supports 1 × 1, 1 × 2, 1 × 4, 2 × 1, 2 × 2, 2 × 4, 4 × 1, 4 × 2, 4 × 4 |
| Decimation | Not supported |
| Reverse image | Supports horizontal reverse image output |
| Electrical feature | |
| Data interface | CoaXPress with DIN interface |
| Digital I/O | 12-pin P10 connector provides I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1(Line 1), bi-directional non-isolated I/O × 1 (Line 2), and RS-232 × 1. |
| Power supply | Camera with fan: 12 VDC to 24 VDC Camera with TEC: 24 VDC |
| Power consumption | Camera with fan: Typ. 18 W @ 24 VDC Camera with TEC non-cooling: Typ. 21 W @ 24 VDC Camera with TEC cooling: Typ. 55 W @ 24 VDC |
| Mechanical | |
| Lens mount | M72*0.75, flange back length 19.55 mm |
| Dimension | Camera with fan: 100 mm × 100 mm × 74.3 mm (3.9″ × 3.9″ × 2.9″) Camera with TEC: 120 mm × 120 mm × 84.6 mm (4.7″ × 4.7″ × 3.3″) |
| Weight | Camera with fan: Approx. 1.0 kg (2.2 lb.) Camera with TEC: Approx. 1.9 kg (4.2 lb.) |
| Ingress protection | IP40 (under proper lens installation and wiring) |
| Temperature | Working temperature: 0 °C to 50 °C (32 °F to 122 °F) Storage temperature: –30 °C to 70 °C (–22 °F to 158 °F) |
| Humidity | 20% RH to 95% RH (no condensation) |
| General | |
| Client software | Frame grabber software meeting with CoaXPress Protocol |
| Operating system | 32/64-bit Windows 7/10, 64-bit Windows 11 with 8 GB memory or above |
| Compatibility | CoaXPress, GenlCam |
| Certification | CE, RoHS, KC |
| HIKROBOT part no. | SM000043532 |
| Status | Available |
Key features
- Resolution of 14208 × 10640, pixel size of 3.76 µm × 3.76 µm.
- Adopts rolling shutter CMOS to provide high dynamic range, SNR, and high-quality image.
- Supports the flat field correction.
- Supports TEC mode, and exposure time of up to 10 seconds.
- Supports 16-bit ADC output with high-precision sampling and high dynamic range.are based on the protocol and standard.
- Adopts CXP-6 interface to transmit data.
Where it is used
The 151 MP resolution and TEC cooling reduce thermally induced error margins in hours-long static measurement tasks (large semiconductor wafers, precision metrology plates). The wide dynamic range prevents detail loss in scenes that combine bright and dark regions in the same frame.
Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.
Is this camera right for your application?
Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.
The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Source: HIKROBOT product data