HIKROBOT MV-CH1010-10CM-M72-NF — Area Scan Cameras
101 MP, Sony IMX461, Camera Link, Mono, 8.1 fps
The MV-CH1010-10CM-M72-NF is the Camera Link monochrome camera that raises the resolution ceiling of the CH series to 101 MP. Its Sony IMX461 rolling shutter CMOS sensor gathers 11648 × 8740 pixels of 3.76 μm × 3.76 μm on a 55 mm class sensor; 45 dB SNR and 78 dB dynamic range mark an image-quality level beyond the 65 MP models. Delivering 8.1 fps in Mono 8 at full resolution, the camera operates in 12-bit and 16-bit ADC modes, where the 16-bit output, in the manufacturer’s words, provides high acquisition accuracy and wide dynamic range. Gain spans 0–36 dB, exposure 14 μs–10 s, and FFC correction is supported.
Data is transferred over Camera Link with SDR interface, and the camera supports the Base, Medium, Full and 80-bit configuration modes; it complies with Camera Link V2.0 and GenICam and works with frame grabber software that meets the GenICam protocol. The Camera Link interface provides I/O on CC1–CC4, while the 12-pin P10 connector carries Line 0 opto-isolated input, Line 1 opto-isolated output, Line 2 bi-directional non-isolated line and RS-232. Two cooling options exist: the fan version runs on 12–24 VDC at 90 mm × 90 mm × 71.5 mm and about 790 g, the TEC version on 24 VDC at 100 mm × 100 mm × 87.2 mm and about 1.7 kg; typical draw is 14 W at 24 VDC and the lens interface is M72*0.75 with a 19.55 mm flange back length.
Specifications
| CH Series — High Resolution | |
|---|---|
| Model | MV-CH1010-10CM-M72-NF |
| Performance | |
| Sensor type | CMOS, rolling shutter |
| Sensor model | Sony® IMX461 |
| Pixel size | 3.76 μm × 3.76 μm |
| Sensor size | 55 mm |
| Resolution | 11648 × 8740 |
| Max. frame rate | 8.1 fps @ 11648 × 8740 Mono 8 |
| Configuration mode | Base, Medium, Full, 80-bit |
| Tap geometry | 2X_1Y, 4X_1Y, 8X_1Y, 10X_1Y |
| Tap number | 2 Taps, 4 Taps, 8 Taps, 10 Taps |
| Pixel clock | 40 MHz, 60 MHz, 70 MHz, 85 MHz |
| Dynamic range | 78 dB |
| SNR | 45 dB |
| Gain | 0 dB to 36 dB |
| Exposure time | 14 μs to 10 sec |
| Exposure mode | Off/Once/Continuous exposure mode, supports Global Reset |
| Mono/color | Mono |
| Pixel format | ADC 12-bit mode: Mono 8/10/12 ADC 16-bit mode: Mono 8/10/12/16 |
| Binning | Supports 1 × 1, 1 × 2, 1 × 4, 2 × 1, 2 × 2, 2 × 4, 4 × 1, 4 × 2, 4 × 4 |
| Decimation | Supports 1 × 1, 1 × 2, 1 × 4, 2 × 1, 2 × 2, 2 × 4, 4 × 1, 4 × 2, 4 × 4 |
| Reverse image | Supports horizontal reverse image output |
| Electrical feature | |
| Data interface | Camera Link with SDR interface |
| Digital I/O | 12-pin P10 connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2), and RS-232 × 1. Camera Link interface provides I/O (CC1/CC2/CC3/CC4) |
| Power supply | Camera with fan: 12 VDC to 24 VDC; Camera with TEC: 24 VDC |
| Power consumption | Typ. 14 W @ 24 VDC |
| Mechanical | |
| Lens mount | M72*0.75, flange back length 19.55 mm |
| Dimension | Camera with fan: 90 mm × 90 mm × 71.5 mm (3.5″ × 3.5″ × 2.8″) Camera with TEC: 100 mm × 100 mm × 87.2 mm (3.9″ × 3.9″ × 3.4″) |
| Weight | Camera with fan: Approx. 790 g (1.7 lb.) Camera with TEC: Approx. 1.7 kg (3.7 lb.) |
| Ingress protection | IP40 (under proper lens installation and wiring) |
| Temperature | Working temperature: 0 °C to 50 °C (32 °F to 122 °F) Storage temperature: –30 °C to 80 °C (–22 °F to 176 °F) |
| Humidity | 20% RH to 95% RH (no condensation) |
| General | |
| Client software | MVS or frame grabber software meeting with GenlCam Protocol |
| Operating system | 32/64-bit Windows 7/10, 64-bit Windows 11 |
| Compatibility | Camera Link V2.0, GenlCam |
| Certification | CE, RoHS, KC |
| HIKROBOT part no. | SM000043530 |
| Status | Available |
Key features
- Supports auto or manual adjustment of gain and exposure time, and manual adjustment of LUT and Gamma correction.
- Supports FFC correction function.
- Provides camera with fan or TEC to meet different working temperature requirements.
- Supports 16-bit ADC output with high acquisition accuracy and wide dynamic range.
- Supports configuration modes of Base, Medium, Full and 80-bit via the Camera Link interface.
- Compatible with Camera Link V2.0 Protocol, GenICam Standard, and the frame grabber software meeting with GenICam Protocol.
Where it is used
101 MP with 16-bit depth is for work where detail, not speed, is decisive: single-frame high-accuracy examination of large photomasks, wafers and display substrates, archive-grade scanning of wide surfaces in cultural heritage and document digitisation, sub-micron-tolerance dimensional measurement on precision optical and mechanical parts. The 45 dB SNR and 78 dB dynamic range allow very bright and very dark regions to be recorded in the same frame without loss of information. Given the rolling shutter and 8.1 fps, the camera performs best on static or indexed stages; the TEC version is the choice where long exposures in low light call for limiting temperature-related noise.
Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.
Is this camera right for your application?
Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.
The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Source: HIKROBOT product data