HIKROBOT MV-CH650-90YC-M58S-NN — Area Scan Cameras
65 MP, Gpixel GMAX3265, CXP-12, Color, 71 fps
For those who need the same speed in colour, the MV-CH650-90YC-M58S-NN delivers the 9344 × 7000 Bayer BG frame at 71 fps over its CXP-12 interface. Underneath is again the Gpixel GMAX3265 global shutter CMOS: 3.2 μm × 3.2 μm pixels, 29.9 mm × 22.4 mm sensor, 40 dB SNR, 66 dB dynamic range, exposure from 12 μs to 10 s and a fixed 1.25x gain. Output formats are limited to Bayer BG 8/10/12, so colour conversion takes place on the host side; the fanless design, LSC sequencer polling function and flat field correction are shared with the monochrome sibling.
The link is CoaXPress with Micro-BNC connectors, and because CXP-0 and CXP-1 support PoCXP the camera can take its 24 VDC over the coaxial cable; typical consumption is 13.2 W at 24 VDC. Alternatively the 12-pin P10 connector supplies both power and I/O: opto-isolated input (Line 0), opto-isolated output (Line 1), bi-directional non-isolated line (Line 2) and RS-232. The roughly 650 g fanless housing measures 84 mm × 84 mm × 92.5 mm; the M58*0.75 mount offers an 11.48 mm flange back length, and CoaXPress plus GenICam compliance brings third-party software support with it.
Specifications
| CH Series — High Resolution | |
|---|---|
| Model | MV-CH650-90YC-M58S-NN |
| Performance | |
| Sensor type | CMOS, global shutter |
| Sensor model | Gpixel GMAX3265 |
| Pixel size | 3.2 μm × 3.2 μm |
| Sensor size | 29.9 mm × 22.4 mm |
| Resolution | 9344 × 7000 |
| Max. frame rate | 71 fps @ 9344 × 7000 |
| Dynamic range | 66 dB |
| SNR | 40 dB |
| Gain | 1.25x |
| Exposure time | 12 μs to 10 sec |
| Exposure mode | Off/Once/Continuous exposure mode |
| Mono | Color |
| Pixel format | Bayer BG 8/10/12 |
| Binning | Supports 1 × 1, 2 × 2, 4 × 4 |
| Decimation | Supports 1 × 1, 2 × 2, 4 × 4 |
| Reverse image | Supports horizontal and vertical reverse image output |
| Electrical feature | |
| Data interface | CoaXPress with Micro-BNC interface |
| Digital I/O | 12-pin P10 connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2), and RS-232 × 1. |
| Power supply | 24 VDC, CXP-0 and CXP-1 connectors support PoCXP |
| Power consumption | Typ. 13.2 W@24 VDC |
| Mechanical | |
| Lens mount | M58*0.75, flange back length 11.48 mm |
| Dimension | 84 mm × 84 mm × 92.5 mm (3.3″ × 3.3″ × 3.6″) |
| Weight | Approx. 650 g (1.4 lb.) |
| Ingress protection | IP40 (under proper lens installation and wiring) |
| Temperature | Working temperature: 0 °C to 50 °C (32 °F to 122 °F) Storage temperature: –30 °C to 80 °C (–22 °F to 176 °F) |
| Humidity | 20% RH to 95% RH (no condensation) |
| General | |
| Client software | MVS or frame grabber software meeting with CoaXPress Protocol |
| Operating system | 32/64-bit Windows 7/10, 64-bit Windows 11 with 8 GB memory or above |
| Compatibility | CoaXPress, GenlCam |
| Certification | CE, RoHS, KC |
| HIKROBOT part no. | SM000040426 |
| Status | Available |
Key features
- Resolution of 9344 × 7000, pixel size of 3.2 µm × 3.2 µm.
- Adopts global shutter CMOS to provide high dynamic range, SNR, and high-quality images.
- Supports LSC sequencer polling function.
- Adopts CXP-12 interface to transmit data.
- Supports the flat field correction.
- Compatible with CoaXPress Protocol, GenICam Standard, and third-party software based on the protocol and standard.
Where it is used
Colour 65 MP at 71 fps is aimed at inspections on fast lines that need both colour and micro-detail: full-width colour and register control in high-speed web printing, verification of colour-coded components and solder appearance at rapid assembly tempo on electronic boards, monitoring of pattern continuity on wide textile and carpet surfaces. The 12 μs exposure floor with a global shutter prevents colour fringing on fast-moving surfaces. The fanless housing is a further plus in food and clean production areas where airflow is unwanted.
Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.
Is this camera right for your application?
Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.
The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Source: HIKROBOT product data