HIKROBOT MV-CH610-10TM-F-TF — Area Scan Cameras
61 MP, Sony IMX455, 10GigE, Mono, 17.9 fps
The MV-CH610-10TM-F-TF represents a different approach within the CH series: a 36 mm × 24 mm Sony IMX455 rolling shutter CMOS with 9568 × 6380 pixels at 3.76 μm × 3.76 μm delivers 61 MP monochrome images at 17.9 fps. Its 46.8 dB SNR, 75.3 dB dynamic range and 16-bit ADC output mark the highest image-quality figures in this group. Integrated TEC cooling lowers sensor temperature to keep noise down during long exposures, which range from 9 μs up to 10 seconds.
The 10 GigE interface provides up to 100 meters of transmission without a relay and remains compatible with Gigabit Ethernet. Supply is 24 VDC, with typical consumption specified at 14.4 W in non-TEC mode and 27.6 W with TEC active; power arrives through the 12-pin P10 connector together with the opto-isolated input and output, bi-directional I/O and RS-232. A detachable F-mount (46.5 mm flange back) and a 100 mm × 100 mm × 82 mm body of about 1090 g work with GigE Vision V2.0 and GenICam based software.
Specifications
| CH Series — High Resolution | |
|---|---|
| Model | MV-CH610-10TM-F-TF |
| Performance | |
| Sensor type | CMOS, rolling shutter |
| Sensor model | Sony® IMX455 |
| Pixel size | 3.76 μm × 3.76 μm |
| Sensor size | 36 mm × 24 mm |
| Resolution | 9568 × 6380 |
| Max. frame rate | 17.9 fps @ 9568 × 6380 Mono 8 |
| Dynamic range | 75.3 dB |
| SNR | 46.8 dB |
| Gain | 0 dB to 36 dB |
| Exposure time | 9 μs to 10 sec |
| Exposure mode | Off/Once/Continuous exposure mode, supports Global Reset |
| Mono/color | Mono |
| Pixel format | Mono 8/10/10Packed/12/12Packed/16 |
| Binning | Supports 1 × 1, 1 × 2, 1 × 4, 2 × 1, 2 × 2, 2 × 4, 4 × 1, 4 × 2, 4 × 4 |
| Decimation | Supports 1 × 1, 1 × 2, 1 × 4, 2 × 1, 2 × 2, 2 × 4, 4 × 1, 4 × 2, 4 × 4 |
| Reverse image | Supports horizontal reverse image output |
| Electrical feature | |
| Data interface | 10 Gigabit Ethernet (10000 Mbit/s), compatible with Gigabit Ethernet (1000 Mbit/s) |
| Digital I/O | 12-pin P10 connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2), and RS-232 × 1. |
| Power supply | 24 VDC |
| Power consumption | Typ. 14.4 W @ 24 VDC (non-TEC mode) Typ. 27.6 W @ 24 VDC (TEC mode) |
| Mechanical | |
| Lens mount | F-mount, flange back length 46.5 mm |
| Dimension | 100 mm × 100 mm × 82 mm (3.9″ × 3.9″ × 3.2″) |
| Weight | Approx. 1090 g (2.4 lb.) |
| Ingress protection | IP40 (under proper lens installation and wiring) |
| Temperature | Working temperature: 0 °C to 50 °C (32 °F to 122 °F) Storage temperature: –30 °C to 80 °C (–22 °F to 176 °F) |
| Humidity | 20% RH to 95% RH (no condensation) |
| General | |
| Client software | MVS or third-party software meeting with GigE Vision Protocol |
| Operating system | 32/64-bit Windows 7/10, 64-bit Windows 11, 32/64-bit Linux |
| Compatibility | GigE Vision V2.0, GenlCam |
| Certification | CE, RoHS, KC |
| HIKROBOT part no. | SM000096509 |
| Status | Available |
Key features
- Provides highly-integrated hardware platform, and supports low power consumption and high cooling efficiency.
- Adopts a new design with a detachable lens mount.
- Adopts 10 GigE interface providing max. transmission distance of 100 meters without relay.
- Adopts TEC to reduce sensor temperature and ensure high-quality images under long-time exposure condition.
- Supports 16-bit ADC output with high-precision sampling and high dynamic range.
- Compatible with GigE Vision Protocol V2.0, GenICam Standard, and third-party software based on protocols.
Where it is used
Taken together, rolling shutter and TEC cooling point this model toward low-noise, long-exposure imaging of stationary or slowly moving subjects: low-light laboratory imaging, microscopy and scientific measurement rigs are typical examples. The full-frame 36 mm × 24 mm sensor documents large parts and panels in a single high-detail capture. Its 16-bit output and 75.3 dB dynamic range suit analyses where very bright and very dark regions must be evaluated in the same scene.
Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.
Is this camera right for your application?
Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.
The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Source: HIKROBOT product data