HIKROBOT MV-CH310-10GM-M58S-NF — Area Scan Cameras
31 MP, Sony IMX342, GigE, Mono, 3.9 fps, M58-mount
The MV-CH310-10GM-M58S-NF is the 31 MP monochrome model in the CH series GigE family; its Sony IMX342 global shutter CMOS spreads 6464 × 4852 pixels of 3.45 μm × 3.45 μm across a large 22.3 mm × 16.7 mm active area. That large sensor yields 40 dB SNR and 73 dB dynamic range, with gain from 0 dB to 24 dB and exposure from 3 μs to 33 μs in UltraShort mode or 36 μs to 2 s in standard mode. Over Gigabit Ethernet it delivers 3.9 fps at full resolution in Mono 8; the M58 lens mount and fan-cooled 74 mm × 74 mm × 74.3 mm body weigh about 550 g.
The Gigabit Ethernet (1000 Mbit/s) interface is compatible with Fast Ethernet (100 Mbit/s) and provides up to 100 meters of transmission distance without a relay. A 12-pin P10 connector carries both the 9 VDC to 24 VDC supply (typically 9 W at 12 VDC) and the I/O: an opto-isolated input (Line 0), an opto-isolated output (Line 1), a bi-directional non-isolated I/O (Line 2) and an RS-232 port. The M58*0.75 mount with an 11.48 mm flange back length pairs with large-format lenses; gain and exposure can be set automatically or manually, LUT and Gamma correction are supported, and mounting holes on the panels plus GigE Vision V2.0 / GenICam compliance complete the integration picture.
Specifications
| CH Series — High Resolution | |
|---|---|
| Model | MV-CH310-10GM-M58S-NF |
| Performance | |
| Sensor type | CMOS, global shutter |
| Sensor model | Sony® IMX342 |
| Pixel size | 3.45 μm × 3.45 μm |
| Sensor size | 22.3 mm × 16.7 mm |
| Resolution | 6464 × 4852 |
| Max. frame rate | 3.9 fps @ 6464 × 4852 Mono 8 |
| Dynamic range | 73 dB |
| SNR | 40 dB |
| Gain | 0 dB to 24 dB |
| Exposure time | UltraShort exposure mode: 3 μs to 33 μs Standard exposure mode: 36 μs to 2 sec |
| Exposure mode | Off/Once/Continuous exposure mode |
| Mono/color | Mono |
| Pixel format | Mono 8/10/10Packed/12/12Packed |
| Binning | Supports 1 × 1, 2 × 2 |
| Decimation | Supports 1 × 1, 2 × 2 |
| Reverse image | Supports horizontal and vertical reverse image output |
| Electrical feature | |
| Data interface | Gigabit Ethernet (1000 Mbit/s), compatible with Fast Ethernet (100 Mbit/s) |
| Digital I/O | 12-pin P10 connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2), and RS-232 × 1. |
| Power supply | 9 VDC to 24 VDC |
| Power consumption | Typ. 9 W @ 12 VDC |
| Mechanical | |
| Lens mount | M58*0.75, flange back length 11.48 mm |
| Dimension | 74 mm × 74 mm × 74.3 mm (2.9″ × 2.9″ × 2.9″) |
| Weight | Approx. 550 g (1.2 lb.) |
| Ingress protection | IP40 (under proper lens installation and wiring) |
| Temperature | Working temperature: 0 °C to 50 °C (32 °F to 122 °F) Storage temperature: –30 °C to 70 °C (–22 °F to 158 °F) |
| Humidity | 20% RH to 95% RH (no condensation) |
| General | |
| Client software | MVS or third-party software meeting with GigE Vision Protocol |
| Operating system | 32/64-bit Windows 7/10, 64-bit Windows 11, 32/64-bit Linux |
| Compatibility | GigE Vision V2.0, GenlCam |
| Certification | CE, RoHS, KC |
| HIKROBOT part no. | SM000043528 |
| Status | Available |
Key features
- Resolution of 6464 × 4852, pixel size of 3.45 μm × 3.45 μm.
- Supports auto and manual adjustment for gain, exposure control, LUT, Gamma correction, etc.
- Adopts GigE interface providing max. transmission distance of 100 meters without relay.
- Compact design with mounting holes on panels for flexible mounting.
Where it is used
A 3.9 fps frame rate steers this camera toward stationary-object applications where a very large area must be captured in one frame with maximum detail, rather than moving lines: dimensional measurement of large mechanical parts, full-board PCB and panel inspection, defect mapping on flat glass and sheet surfaces. The 73 dB dynamic range and 40 dB SNR are an advantage on metal and glass surfaces that hold bright and dark regions in the same frame, and the RS-232 port allows serial communication with other devices at the station.
Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.
Is this camera right for your application?
Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.
The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Source: HIKROBOT product data