HIKROBOT MV-CH250-90Y2M-C-NF — Area Scan Cameras
25 MP, Gpixel GMAX0505, 2-link CXP-12, Mono, 85 fps
Thanks to its two CXP-12 links, the MV-CH250-90Y2M-C-NF pushes the full 5120 × 5120 frame to 85 fps in Mono 8, the highest frame rate among the GMAX0505-based 25 MP models in the CH series. The Gpixel GMAX0505 global shutter CMOS offers 2.5 μm × 2.5 μm pixels, 35 dB SNR and 60 dB dynamic range, with gain specified at 2.5×. This monochrome camera measures 40 mm × 40 mm × 66.5 mm, weighs about 134.2 g and operates from 0 °C to 50 °C.
Image data travels over the two CXP-12 links of the Micro-BNC CoaXPress interface; PoCXP is supported on CXP-0, a 9 VDC to 24 VDC external supply input is also available, and typical consumption is 7.1 W at 12 VDC. The 6-pin P7 connector carries one opto-isolated input, one opto-isolated output and one bi-directional non-isolated I/O, while exposure runs from 4 μs to 12 μs in UltraShort mode and 13 μs to 10 s in standard mode. The camera accepts C-mount lenses and works with the CoaXPress protocol, the GenICam standard and third-party software built on them.
Specifications
| CH Series — High Resolution | |
|---|---|
| Model | MV-CH250-90Y2M-C-NF |
| Performance | |
| Sensor type | CMOS, global shutter |
| Sensor model | Gpixel GMAX0505 |
| Pixel size | 2.5 μm × 2.5 μm |
| Sensor size | 1.1″ |
| Resolution | 5120 × 5120 |
| Max. frame rate | 85 fps @ 5120 × 5120 Mono 8 |
| Dynamic range | 60 dB |
| SNR | 35 dB |
| Gain | 2.5 × |
| Exposure time | UltraShort exposure mode: 4 μs to 12 μs Standard exposure mode: 13 μs to 10 sec |
| Exposure mode | Off/Once/Continuous exposure mode, supports Trigger Width |
| Mono/color | Mono |
| Pixel format | Mono 8/10/12 |
| Binning | Supports 1 × 1, 1 × 2, 1 × 4, 2 × 1, 2 × 2, 2 × 4, 4 × 1, 4 × 2, 4 × 4 |
| Decimation | Supports 1 × 1, 1 × 2, 1 × 4, 2 × 1, 2 × 2, 2 × 4, 4 × 1, 4 × 2, 4 × 4 |
| Reverse image | Supports horizontal and vertical reverse image output |
| Electrical feature | |
| Data interface | CoaXPress with Micro-BNC interface |
| Digital I/O | 6-pin P7 connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1(Line 1), and bi-directional non-isolated I/O × 1 (Line 2). |
| Power supply | 9 VDC to 24 VDC, CXP-0 supports PoCXP |
| Power consumption | Typ. 7.1 W @ 12 VDC |
| Mechanical | |
| Lens mount | C-mount |
| Dimension | 40 mm × 40 mm × 66.5 mm (1.6″ × 1.6″ × 2.6″) |
| Weight | Approx. 134.2 g (0.3 lb.) |
| Ingress protection | IP40 (under proper lens installation and wiring) |
| Temperature | Working temperature: 0 °C to 50 °C (32 °F to 122 °F) Storage temperature: –30 °C to 80 °C (–22 °F to 176 °F) |
| Humidity | 20% RH to 95% RH (no condensation) |
| General | |
| Client software | MVS or frame grabber software meeting with CoaXPress Protocol |
| Operating system | 32/64-bit Windows 7/10, 64-bit Windows 11, 32/64-bit Linux |
| Compatibility | CoaXPress, GenlCam |
| Certification | CE, RoHS, KC |
| HIKROBOT part no. | SM000104130 |
| Status | Available |
Key features
- Resolution of 5120 × 5120, pixel size of 2.5 µm × 2.5 µm.
- Adopts global shutter CMOS sensor to provide high dynamic range and high-quality image.
- Adopts CXP-12 interface to transmit data.
- Compatible with CoaXPress Protocol, GenICam Standard, and third-party software based on the protocol and standard.
Where it is used
Eighty-five full-resolution frames per second pay off where high resolution normally comes at the cost of speed: high-throughput inspection of electronic components and connectors, surface scanning of wafers and glass substrates, fine defect detection on fast-moving lines. The monochrome sensor and exposures down to 4 μs suit measurement and detection tasks that need to limit motion blur under strong illumination.
Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.
Is this camera right for your application?
Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.
The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Source: HIKROBOT product data