HIKROBOT MV-CH250-90TM-M58S-NF — Area Scan Cameras
25 MP, Gpixel GMAX0505, 10GigE, Mono, 41.5 fps, M58
The MV-CH250-90TM-M58S-NF offers the 10GigE monochrome 25 MP camera with an M58×0.75 thread and 11.48 mm flange back length instead of C-mount, intended for direct fitting of large-diameter optics that illuminate the 1.1-inch sensor efficiently edge to edge. This fan-cooled member of the CH series high-resolution family uses the Gpixel GMAX0505 global shutter CMOS at 5120 × 5120 pixels of 2.5 μm × 2.5 μm to deliver 41.5 fps in Mono 8. It shares 36 dB SNR, 63 dB dynamic range, 2.0x to 5.0x gain and both the 3 μs to 8 μs UltraShort and 9 μs to 10 s standard exposure modes with its C-mount sibling.
The M58 mount brings the housing weight down to about 550 g while the outer dimensions of 74 mm × 74 mm × 78.8 mm and the IP40 rating stay the same. 10 Gigabit Ethernet provides transmission up to 100 meters and is backward compatible with Gigabit Ethernet; the camera runs on 9 VDC to 24 VDC and draws a typical 9.7 W at 12 VDC. The 12-pin P10 connector gathers an opto-isolated input (Line 0), an opto-isolated output (Line 1), a bi-directional non-isolated line (Line 2) and an RS-232 port on one body; exposure, gain, LUT and Gamma are set through GigE Vision V2.0 and GenICam from MVS or third-party software, and mounting holes on the panels allow flexible placement.
Specifications
| CH Series — High Resolution | |
|---|---|
| Model | MV-CH250-90TM-M58S-NF |
| Performance | |
| Sensor type | CMOS, global shutter |
| Sensor model | Gpixel GMAX0505 |
| Pixel size | 2.5 μm × 2.5 μm |
| Sensor size | 1.1″ |
| Resolution | 5120 × 5120 |
| Max. frame rate | 41.5 fps @ 5120 × 5120 Mono 8 |
| Dynamic range | 63 dB |
| SNR | 36 dB |
| Gain | 2.0x to 5.0x |
| Exposure time | UltraShort exposure mode: 3 μs to 8 μs Standard exposure mode: 9 μs to 10 sec |
| Exposure mode | Off/Once/Continuous exposure mode |
| Mono/color | Mono |
| Pixel format | Mono 8/10/10Packed/12/12Packed |
| Binning | Supports 1 × 1, 1 × 2, 1 × 4, 2 × 1, 2 × 2, 2 × 4, 4 × 1, 4 × 2, 4 × 4 |
| Decimation | Supports 1 × 1, 1 × 2, 1 × 4, 2 × 1, 2 × 2, 2 × 4, 4 × 1, 4 × 2, 4 × 4 |
| Reverse image | Supports horizontal and vertical reverse image output |
| Electrical feature | |
| Data interface | 10 Gigabit Ethernet (10000 Mbit/s), compatible with Gigabit Ethernet (1000 Mbit/s) |
| Digital I/O | 12-pin P10 connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2), and RS-232 × 1 |
| Power supply | 9 VDC to 24 VDC |
| Power consumption | Typ. 9.7 W @ 12 VDC |
| Mechanical | |
| Lens mount | M58*0.75, flange back length 11.48 mm |
| Dimension | 74 mm × 74 mm × 78.8 mm (2.9″ × 2.9″ × 3.1″) |
| Weight | Approx. 550 g (1.2 lb.) |
| Ingress protection | IP40 ( under proper lens installation and wiring) |
| Temperature | Working temperature: 0 °C to 50 °C (32 °F to 122 °F) Storage temperature: –30 °C to 70 °C (–22 °F to 158 °F) |
| Humidity | 20% RH to 95% RH (no condensation) |
| General | |
| Client software | MVS or third-party software meeting with GigE Vision Protocol |
| Operating system | 32/64-bit Windows 7/10, 64-bit Windows 11, and 32/64-bit Linux |
| Compatibility | GigE Vision V2.0, GenlCam |
| Certification | CE, RoHS, KC |
| HIKROBOT part no. | SM000033578 |
| Status | Available |
Key features
- Resolution of 5120 × 5120, pixel size of 2.5 μm × 2.5 μm.
- Adopts 10 GigE interface providing maximum transmission distance of 100 meters.
- Supports adjustment for exposure time, gain, Look-Up Table (LUT), Gamma correction, etc.
- Mounting holes on panels for flexible installation.
- Compatible with GigE Vision Protocol V2.0, GenICam Standard, and third-party software based on protocols.
Where it is used
The M58 thread is the choice for wide-field measurement systems that work with large-diameter precision or telecentric optics: full-frame defect scanning of display panels and glass substrates, dimensional checks of large sheet-metal or cast parts on lines running at 41.5 fps, and surface verification after high-resolution printing or laser processing. The UltraShort exposure mode allows crisp frames on fast-moving reflective surfaces under strobe lighting. The fan-cooled housing is intended for continuous duty in enclosed stations where the camera runs at full speed all shift long.
Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.
Is this camera right for your application?
Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.
The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Source: HIKROBOT product data