HIKROBOT MV-CH250-90TM-C-NF — Area Scan Cameras
25 MP, Gpixel GMAX0505, 10GigE, Mono, 41.5 fps
The MV-CH250-90TM-C-NF takes the same 25 MP sensor to the top of the speed range: it is the 10GigE branch of the CH series high-resolution family, delivered as a fan-cooled, C-mount, monochrome camera. Here the 5120 × 5120 frame of the 1.1-inch Gpixel GMAX0505 global shutter CMOS streams at 41.5 fps in Mono 8, with 36 dB SNR and 63 dB dynamic range unchanged. Exposure control is a second differentiator: alongside the standard 9 μs to 10 s mode there is an UltraShort mode from 3 μs to 8 μs for freezing motion under very brief light pulses, and gain is adjustable from 2.0x to 5.0x.
The 10 Gigabit Ethernet interface provides a maximum transmission distance of 100 meters and falls back to Gigabit Ethernet, so the camera can be commissioned on an existing GigE network and unlocked to its full 41.5 fps once the link is upgraded. A 12-pin P10 connector consolidates power and I/O: an opto-isolated input (Line 0), an opto-isolated output (Line 1), a bi-directional non-isolated line (Line 2) and, in addition, an RS-232 port. Power is 9 VDC to 24 VDC at a typical 9.7 W at 12 VDC; the fan-cooled 74 mm × 74 mm × 78.8 mm housing weighs about 590 g, is rated IP40 and works from 0 °C to 50 °C, with mounting holes on the panels. Exposure, gain, LUT and Gamma are all exposed through GigE Vision V2.0 and GenICam to MVS and third-party software.
Specifications
| CH Series — High Resolution | |
|---|---|
| Model | MV-CH250-90TM-C-NF |
| Performance | |
| Sensor type | CMOS, global shutter |
| Sensor model | Gpixel GMAX0505 |
| Pixel size | 2.5 μm × 2.5 μm |
| Sensor size | 1.1″ |
| Resolution | 5120 × 5120 |
| Max. frame rate | 41.5 fps @ 5120 × 5120 Mono 8 |
| Dynamic range | 63 dB |
| SNR | 36 dB |
| Gain | 2.0x to 5.0x |
| Exposure time | UltraShort exposure mode: 3 μs to 8 μs Standard exposure mode: 9 μs to 10 sec |
| Exposure mode | Off/Once/Continuous exposure mode |
| Mono/color | Mono |
| Pixel format | Mono 8/10/10Packed/12/12Packed |
| Binning | Supports 1 × 1, 1 × 2, 1 × 4, 2 × 1, 2 × 2, 2 × 4, 4 × 1, 4 × 2, 4 × 4 |
| Decimation | Supports 1 × 1, 1 × 2, 1 × 4, 2 × 1, 2 × 2, 2 × 4, 4 × 1, 4 × 2, 4 × 4 |
| Reverse image | Supports horizontal and vertical reverse image output |
| Electrical feature | |
| Data interface | 10 Gigabit Ethernet (10000 Mbit/s), compatible with Gigabit Ethernet (1000 Mbit/s) |
| Digital I/O | 12-pin P10 connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2), and RS-232 × 1 |
| Power supply | 9 VDC to 24 VDC |
| Power consumption | Typ. 9.7 W @ 12 VDC |
| Mechanical | |
| Lens mount | C-mount |
| Dimension | 74 mm × 74 mm × 78.8 mm (2.9″ × 2.9″ × 3.1″) |
| Weight | Approx. 590 g (1.3 lb.) |
| Ingress protection | IP40 ( under proper lens installation and wiring) |
| Temperature | Working temperature: 0 °C to 50 °C (32 °F to 122 °F) Storage temperature: –30 °C to 70 °C (–22 °F to 158 °F) |
| Humidity | 20% RH to 95% RH (no condensation) |
| General | |
| Client software | MVS or third-party software meeting with GigE Vision Protocol |
| Operating system | 32/64-bit Windows 7/10, 64-bit Windows 11, and 32/64-bit Linux |
| Compatibility | GigE Vision V2.0, GenlCam |
| Certification | CE, RoHS, KC |
| HIKROBOT part no. | SM000037341 |
| Status | Available |
Key features
- Resolution of 5120 × 5120, pixel size of 2.5 μm × 2.5 μm.
- Adopts 10 GigE interface providing maximum transmission distance of 100 meters.
- Supports adjustment for exposure time, gain, Look-Up Table (LUT), Gamma correction, etc.
- Mounting holes on panels for flexible installation.
- Compatible with GigE Vision Protocol V2.0, GenICam Standard, and third-party software based on protocols.
Where it is used
25 MP at 41.5 fps means high resolution is no longer confined to static stations: surface-defect scanning on continuously moving glass, film or metal strip, full-frame measurement of large flat parts on fast conveyors, and high-tempo display panel or wafer inspection are the intended territory. The UltraShort exposure mode helps obtain crisp frames with strobed lighting on products moving tens of meters per minute or faster. The RS-232 port adds a direct link for cells where a lighting controller or motion axis communicates over serial.
Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.
Is this camera right for your application?
Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.
The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Source: HIKROBOT product data