HIKROBOT MV-CH120-90Y2M-C-NN — Area Scan Cameras
12 MP, Gpixel GMAX3412, 2-link CXP-12, Mono, 149 fps
The fastest member of this set, the MV-CH120-90Y2M-C-NN uses two CXP-12 links together to pull 149 fps in Mono 8 at 4096 × 3008 from a Gpixel GMAX3412 sensor. This 12 MP monochrome model in the CoaXPress branch of the CH series comes with 3.4 μm × 3.4 μm pixels, 38.9 dB SNR and 59.8 dB dynamic range; exposure starts at 6 μs and gain spans 0 dB to 6.1 dB. The fanless body measures 50 mm × 50 mm × 45 mm and weighs about 207 g.
Two Micro-BNC CoaXPress connections are used; the CXP-0 line supports PoCXP, a 9 VDC to 24 VDC range applies for external supply, and consumption is typically 6.1 W at 12 VDC. Unlike the other models in this set, I/O is gathered on a 12-pin P10 connector: opto-isolated input (Line 0), opto-isolated output (Line 1), bi-directional non-isolated line (Line 2) plus an RS-232 port. Off, Once and Continuous exposure modes are supported, and the IP40 body with C-mount lens fitting works from 0 °C to 50 °C. CoaXPress and GenICam compliance allows integration with standards-based third-party software.
Specifications
| CH Series — High Resolution | |
|---|---|
| Model | MV-CH120-90Y2M-C-NN |
| Performance | |
| Sensor type | CMOS, global shutter |
| Sensor model | Gpixel GMAX3412 |
| Pixel size | 3.4 μm × 3.4 μm |
| Sensor size | 1.1″ |
| Resolution | 4096 × 3008 |
| Max. frame rate | 149 fps @ 4096 × 3008 Mono 8 |
| Dynamic range | 59.8 dB |
| SNR | 38.9 dB |
| Gain | 0 dB to 6.1 dB |
| Exposure time | 6 μs to 10 sec |
| Exposure mode | Off/Once/Continuous exposure mode |
| Mono/color | Mono |
| Pixel format | Mono 8/10/12 |
| Binning | Supports 1 × 1, 1 × 2, 1 × 4, 2 × 1, 2 × 2, 2 × 4, 4 × 1, 4 × 2, 4 × 4 |
| Decimation | Supports 1 × 1, 1 × 2, 1 × 4, 2 × 1, 2 × 2, 2 × 4, 4 × 1, 4 × 2, 4 × 4 |
| Reverse image | Supports horizontal and vertical reverse image output |
| Electrical feature | |
| Data interface | CoaXPress with Micro-BNC interfaces |
| Digital I/O | 12-pin P10 connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1(Line 1), bi-directional non-isolated I/O × 1 (Line 2), and RS-232 × 1. |
| Power supply | 9 VDC to 24 VDC, CXP-0 supports PoCXP |
| Power consumption | Typ. 6.1 W @ 12 VDC |
| Mechanical | |
| Lens mount | C-mount |
| Dimension | 50 mm × 50 mm × 45 mm (2.0″ × 2.0″ × 1.8″) |
| Weight | Approx. 207 g (0.5 lb.) |
| Ingress protection | IP40 (under proper lens installation and wiring) |
| Temperature | Working temperature: 0 °C to 50 °C (32 °F to 122 °F) Storage temperature: –30 °C to 80 °C (–22 °F to 176 °F) |
| Humidity | 20% RH to 95% RH (no condensation) |
| General | |
| Client software | MVS or frame grabber software meeting with CoaXPress Protocol |
| Operating system | 32/64-bit Windows 7/10, 64-bit Windows 11, and 32/64-bit Linux |
| Compatibility | CoaXPress, GenlCam |
| Certification | CE, RoHS, KC |
| HIKROBOT part no. | SM000084508 |
| Status | Available |
Key features
- Resolution of 4096 × 3008, pixel size of 3.4 µm × 3.4 µm.
- Adopts global shutter CMOS sensor to provide high dynamic range, SNR, and high-quality image.
- Adopts CXP-12 interface to transmit data.
- Supports Off, Once, and Continuous exposure modes.
- Compatible with CoaXPress Protocol, GenICam Standard, and third-party software based on the protocol and standard.
Where it is used
12 MP at 149 fps is aimed at high-speed sorting, impact/motion analysis and production-line recording tasks that require large, fast-moving parts to be captured whole in a single frame. It can be used for defect scanning of web products such as paper, film and sheet metal at high belt speeds and for post-placement checks of electronic components at speed. The RS-232 port enables connection to serially controlled lighting or motion controllers through the same connector.
Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.
Is this camera right for your application?
Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.
The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Source: HIKROBOT product data