HIKROBOT MV-CH120-60GM — Area Scan Cameras
12 MP, Stacked BSI, GigE, Mono, 9.5 fps
The MV-CH120-60GM is the 12 MP model in the CH series GigE line, pairing a 1.1-inch Stacked BSI global shutter CMOS sensor with a 4096 × 3000 monochrome output. Its 3.45 μm pixels, 44.1 dB SNR and 67.2 dB dynamic range produce low-noise frames with generous tonal range, while the 9.5 fps rate in Mono 8 is matched to what a Gigabit Ethernet link carries. Exposure is adjustable from 10 μs to 10 s, covering short strobe-lit captures as well as long dim-light integrations.
The Gigabit Ethernet (1000 Mbit/s) port is also compatible with Fast Ethernet (100 Mbit/s), and PoE support lets data and power share one Ethernet cable; typical consumption is just 2.1 W at 12 VDC. When a separate supply is preferred, 9–24 VDC goes in through the 6-pin P7 connector, which also carries an opto-isolated input (Line 0), an opto-isolated output (Line 1) and a bi-directional non-isolated line (Line 2). The 29 × 29 × 42 mm C-mount body weighs about 100 g and mounts from four sides; LSC, Sequencer and passive transmission are supported, and GigE Vision V2.0 and GenICam compliance keeps it compatible with software built on those standards.
Specifications
| CH Series — High Resolution | |
|---|---|
| Model | MV-CH120-60GM |
| Performance | |
| Sensor type | CMOS, global shutter |
| Sensor model | Stacked BSI |
| Pixel size | 3.45 μm × 3.45 μm |
| Sensor size | 1.1″ |
| Resolution | 4096 × 3000 |
| Max. frame rate | 9.5 fps @ 4096 × 3000 Mono 8 |
| Dynamic range | 67.2 dB |
| SNR | 44.1 dB |
| Gain | 0 dB to 12 dB |
| Exposure time | 10 μs to 10 sec |
| Exposure mode | Off/Once/Continuous exposure mode, supports TriggerWidth |
| Mono/color | Mono |
| Pixel format | Mono 8/10/10Packed/12/12Packed |
| Binning | Supports 1 × 1, 2 × 2, 4 × 4 |
| Decimation | Supports 1 × 1, 2 × 2, 4 × 4 |
| Reverse image | Supports horizontal and vertical reverse image output |
| Electrical feature | |
| Data interface | Gigabit Ethernet (1000 Mbit/s), compatible with Fast Ethernet (100 Mbit/s) |
| Digital I/O | 6-pin P7 connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2). |
| Power supply | 9 VDC to 24 VDC, supports PoE |
| Power consumption | Typ. 2.1 W @ 12 VDC |
| Mechanical | |
| Lens mount | C-mount |
| Dimension | 29 mm × 29 mm × 42 mm (1.1″ × 1.1″ × 1.7″) |
| Weight | Approx. 100 g (0.2 lb.) |
| Ingress protection | IP40 (under proper lens installation and wiring) |
| Temperature | Working temperature: –10 °C to 50 °C (14 °F to 122 °F) Storage temperature: –30 °C to 70 °C (–22 °F to 158 °F) |
| Humidity | 20% RH to 95% RH (no condensation) |
| General | |
| Client software | MVS or third-party software meeting with GigE Vision Protocol |
| Operating system | 32/64-bit Windows 7/10, 64-bit Windows 11, and 32/64-bit Linux |
| Compatibility | GigE Vision V2.0, GenlCam |
| Certification | CE, RoHS, KC |
| HIKROBOT part no. | SM000067193 |
| Status | Being discontinued |
Key features
- Compact design with mounting holes on panels for flexible mounting from 4 sides.
- Supports auto or manual adjustment of gain and exposure time, and LUT and Gamma correction function.
- Supports LSC, Sequencer, passive transmission, etc.
- Supports functions like white balance, CCM, Super Palette, and Super Bayer to provide high-quality images.
- Compatible with GigE Vision V2.0 Protocol, GenICam Standard, and third-party software based on the protocol and standard.
Where it is used
It suits static or slow-moving inspection where resolution matters more than frame rate: measuring large sheet-metal and cast parts, or full-frame geometric verification of molded housings and connectors. Post-assembly scans of electronic boards for missing or wrong components can cover a large board area in a single frame. Where a multi-camera measurement cell is built on Ethernet infrastructure, PoE and the low power draw keep cabling simple.
Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.
Is this camera right for your application?
Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.
The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Source: HIKROBOT product data