HIKROBOT MV-CH120-10GM V5 — Area Scan Cameras
12 MP, Sony IMX304, GigE, Mono, 9.9 fps
The MV-CH120-10GM V5 is the V5 release of the IMX304-based 12 MP GigE monochrome camera in the CH family; 9.9 fps at 4096 × 3000 Mono 8, 40 dB SNR and 70.4 dB dynamic range are identical to the V4. The differences visible on the datasheet are an UltraShort exposure floor of 1 μs, typical consumption down to 2.3 W, a 98 g weight and a storage temperature reaching 80 °C. Gain and exposure are set automatically or manually, LUT and Gamma manually; the Sony® global-shutter sensor keeps its 3.45 μm pixels and 1.1-inch format.
The Gigabit Ethernet (1000 Mbit/s) link is backward compatible with Fast Ethernet; PoE or a 9–24 VDC input supplies power. Mounting holes on four faces of the 29 × 29 × 42 mm body allow fixing from different directions. The 6-pin P7 connector offers one opto-isolated input, one opto-isolated output and one bi-directional line; LSC, Sequencer and transfer passive mode are supported, and the IP40 C-mount body operates between –10 °C and 50 °C and integrates with GigE Vision V2.0 / GenICam based software.
Specifications
| CH Series — High Resolution | |
|---|---|
| Model | MV-CH120-10GM V5 |
| Performance | |
| Sensor type | CMOS, global shutter |
| Sensor model | Sony® IMX304 |
| Pixel size | 3.45 μm × 3.45 μm |
| Sensor size | 1.1″ |
| Resolution | 4096 × 3000 |
| Max. frame rate | 9.9 fps @ 4096 × 3000 Mono 8 |
| Dynamic range | 70.4 dB |
| SNR | 40 dB |
| Gain | 0 dB to 24 dB |
| Exposure time | UltraShort exposure mode: 1 μs to 14 μs Standard exposure mode: 15 μs to 10 sec |
| Exposure mode | Off/Once/Continuous exposure mode, and supports Trigger Width |
| Mono/color | Mono |
| Pixel format | Mono 8/10/10Packed/12/12Packed |
| Binning | Supports 1 × 1, 2 × 2, 4 × 4 |
| Decimation | Supports 1 × 1, 2 × 2, 4 × 4 |
| Reverse image | Supports horizontal and vertical reverse image output |
| Electrical feature | |
| Data interface | Gigabit Ethernet (1000 Mbit/s), compatible with Fast Ethernet (100 Mbit/s) |
| Digital I/O | 6-pin P7 connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2). |
| Power supply | 9 VDC to 24 VDC, supports PoE |
| Power consumption | Typ. 2.3 W @ 12 VDC |
| Mechanical | |
| Lens mount | C-mount |
| Dimension | 29 mm × 29 mm × 42 mm (1.1″ × 1.1″ × 1.7″) |
| Weight | Approx. 98 g (0.2 lb.) |
| Ingress protection | IP40 (under proper lens installation and wiring) |
| Temperature | Working temperature: –10 °C to 50 °C (14 °F to 122 °F) Storage temperature: –30 °C to 80 °C (–22 °F to 176 °F) |
| Humidity | 20% RH to 95% RH (no condensation) |
| General | |
| Client software | MVS or third-party software meeting with GigE Vision Protocol |
| Operating system | 32/64-bit Windows 7/10, 64-bit Windows 11, and 32/64-bit Linux |
| Compatibility | GigE Vision 2.0, GenlCam |
| Certification | CE, RoHS, KC |
| HIKROBOT part no. | SM000115624 |
| Status | Available |
Key features
- Compact design with mounting holes on panels for flexible mounting from 4 sides.
- Supports auto and manual adjustment of gain, exposure control, and manual adjustment of LUT and Gamma correction.
- Supports LSC, Sequencer, transfer passive mode, etc.
- Color camera supports interpolation, white balance, CCM, Super Palette, and Super Bayer, etc.
- Compatible with GigE Vision Protocol V2.0, GenICam Standard, and third-party software based on these protocol and standard.
Where it is used
This is the version to specify for newly built 12 MP GigE mono stations: measurement and calibration benches, edge and hole-position measurement on precision parts, mark reading and surface inspection on PCBs and semiconductor packages. Exposure down to 1 μs leaves headroom for freezing moving objects with short strobes, and the low consumption with PoE eases the power budget in multi-camera setups.
Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.
Is this camera right for your application?
Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.
The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Source: HIKROBOT product data