HIKROBOT MV-CH050-90XC-C-NN — Area Scan Cameras
5 MP, Gpixel GMAX2505, CoaXPress CXP-6, Color, 213 fps
Color at 213 fps: the MV-CH050-90XC-C-NN is the 5 MP CoaXPress camera in the CH series that uses the Gpixel GMAX2505 global shutter CMOS sensor with a Bayer BG color array. The 1/2″ sensor delivers 2592 × 2160 from 2.5 μm pixels; the 213 fps rate in Bayer BG 8, 37 dB SNR and 63.8 dB dynamic range match the monochrome version. Output can be taken as Bayer BG 8/12, YUV 422 Packed or Mono 8, SuperBayer and CCM functions support color processing on the camera side, and gain is set in steps from 1.0x to 2.0x.
The color version draws slightly less than its monochrome sibling at a typical 4.8 W at 12 VDC; power can come from a 9–24 VDC supply or over the coaxial cable via PoCXP on the CXP-1 link. The CoaXPress interface with DIN connector operates at CXP-6 speed, and the 12-pin P10 connector houses Line 0 as an opto-isolated input, Line 1 as an opto-isolated output, Line 2 as a bi-directional non-isolated line and an RS-232 port. The fanless 50 × 50 × 45 mm IP40 body of about 220 g comes with a C-mount of 17.52 mm flange back length and operates from 0 °C to 50 °C; it complies with CoaXPress and GenICam and supports LSC correction and Super Palette along with Off, Once and Continuous exposure modes.
Specifications
| CH Series — High Resolution | |
|---|---|
| Model | MV-CH050-90XC-C-NN |
| Performance | |
| Sensor type | CMOS, global shutter |
| Sensor model | Gpixel GMAX2505 |
| Pixel size | 2.5 μm × 2.5 μm |
| Sensor size | 1/2″ |
| Resolution | 2592 × 2160 |
| Max. frame rate | 213 fps @ 2592 × 2160 Bayer BG 8 |
| Dynamic range | 63.8 dB |
| SNR | 37 dB |
| Gain | 1.0x, 1.25x, 1.5x, 1.75x, 2.0x |
| Exposure time | 5 μs to 10 sec |
| Exposure mode | Off/Once/Continuous exposure mode |
| Mono/color | Color |
| Pixel format | Mono 8, Bayer BG 8/12, YUV 422 Packed |
| Binning | Supports 1 × 1, 1 × 2, 1 × 4, 2 ×1, 2 × 2, 2 × 4, 4 × 1, 4 × 2, 4 × 4 |
| Decimation | Supports 1 × 1, 1 × 2, 1 × 4, 2 ×1, 2 × 2, 2 × 4, 4 × 1, 4 × 2, 4 × 4 |
| Reverse image | Supports horizontal and vertical reverse image output |
| Electrical feature | |
| Data interface | CoaXPress with DIN interface |
| Digital I/O | 12-pin P10 connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2), and RS-232 × 1. |
| Power supply | 9 VDC to 24 VDC, CXP-1 supports PoCXP |
| Power consumption | Typ. 4.8 W @ 12 VDC |
| Mechanical | |
| Lens mount | C-mount, flange back length 17.52 mm |
| Dimension | 50 mm × 50 mm × 45 mm (2.0″ × 2.0″ × 1.8″) |
| Weight | Approx. 220 g (0.5 lb.) |
| Ingress protection | IP40 (under proper lens installation and wiring) |
| Temperature | Working temperature: 0 °C to 50 °C (32 °F to 122 °F) Storage temperature: –30 °C to 80 °C (–22 °F to 176 °F) |
| Humidity | 20% RH to 95% RH (no condensation) |
| General | |
| Client software | MVS or frame grabber software meeting with CoaXPress Protocol |
| Operating system | 32/64-bit Windows 7/10, 64-bit Windows 11, and 32/64-bit Linux |
| Compatibility | CoaXPress, GenlCam |
| Certification | CE, RoHS, KC |
| HIKROBOT part no. | SM000077100 |
| Status | Being discontinued |
Key features
- Resolution of 2592 × 2160, pixel size of 2.5 µm × 2.5 µm.
- Adopts global shutter CMOS sensor to provide high dynamic range, SNR, and high-quality image.
- Supports LSC correction, super palette, CCM, and SuperBayer.
- Adopts CXP-6 interface to transmit data.
- Supports Off, Once, and Continuous exposure modes.
- Compatible with CoaXPress Protocol and GenICam Standard.
Where it is used
Jobs where color discrimination must happen at high speed fall within this camera’s scope: print and label control on fast packaging lines, sorting of color-coded tablets or capsules, and verification of multi-colored wire harnesses. The 2.5 μm pixel pitch can resolve fine print detail, and 213 fps allows color deviations on continuously moving web materials such as label rolls and foil to be tracked without missing frames.
Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.
Is this camera right for your application?
Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.
The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Source: HIKROBOT product data