HIKROBOT MV-CH050-90XM-C-NN — Area Scan Cameras
5 MP, Gpixel GMAX2505, CoaXPress CXP-6, Mono, 213 fps
The MV-CH050-90XM-C-NN is a 5 MP monochrome camera in the CoaXPress branch of the CH series, built on a Gpixel GMAX2505 global shutter CMOS sensor; the product name specifies a C-mount and a fanless build. Its 1/2″ sensor produces 2592 × 2160 from small 2.5 μm × 2.5 μm pixels and reaches 213 fps in Mono 8 over the CXP-6 interface, the highest frame rate in this group. SNR is 37 dB and dynamic range 63.8 dB; gain is selected in five steps between 1.0x and 2.0x (1.0x/1.25x/1.5x/1.75x/2.0x), and exposure spans 5 μs to 10 s.
The CoaXPress interface with DIN connector carries data at CXP-6 speed, and since the CXP-1 link supports PoCXP the camera can be powered over the coaxial cable; alternatively a 9–24 VDC external supply is used, with a typical draw of 5.3 W at 12 VDC. Unlike other models, the 12-pin P10 connector adds an RS-232 port to the opto-isolated input (Line 0), opto-isolated output (Line 1) and bi-directional non-isolated line (Line 2). The 50 × 50 × 45 mm IP40 body of about 220 g carries a C-mount with 17.52 mm flange back length, has no fan and operates from 0 °C to 50 °C; it complies with CoaXPress and GenICam and supports LSC correction, Super Palette, CCM and SuperBayer as well as Off, Once and Continuous exposure modes.
Specifications
| CH Series — High Resolution | |
|---|---|
| Model | MV-CH050-90XM-C-NN |
| Performance | |
| Sensor type | CMOS, global shutter |
| Sensor model | Gpixel GMAX2505 |
| Pixel size | 2.5 μm × 2.5 μm |
| Sensor size | 1/2″ |
| Resolution | 2592 × 2160 |
| Max. frame rate | 213 fps @ 2592 × 2160 Mono 8 |
| Dynamic range | 63.8 dB |
| SNR | 37 dB |
| Gain | 1.0x, 1.25x, 1.5x, 1.75x, 2.0x |
| Exposure time | 5 μs to 10 sec |
| Exposure mode | Off/Once/Continuous exposure mode |
| Mono/color | Mono |
| Pixel format | Mono 8/12 |
| Binning | Supports 1 × 1, 1 × 2, 1 × 4, 2 ×1, 2 × 2, 2 × 4, 4 × 1, 4 × 2, 4 × 4 |
| Decimation | Supports 1 × 1, 1 × 2, 1 × 4, 2 ×1, 2 × 2, 2 × 4, 4 × 1, 4 × 2, 4 × 4 |
| Reverse image | Supports horizontal and vertical reverse image output |
| Electrical feature | |
| Data interface | CoaXPress with DIN interface |
| Digital I/O | 12-pin P10 connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2), and RS-232 × 1. |
| Power supply | 9 VDC to 24 VDC, CXP-1 supports PoCXP |
| Power consumption | Typ. 5.3 W @ 12 VDC |
| Mechanical | |
| Lens mount | C-mount, flange back length 17.52 mm |
| Dimension | 50 mm × 50 mm × 45 mm (2.0″ × 2.0″ × 1.8″) |
| Weight | Approx. 220 g (0.5 lb.) |
| Ingress protection | IP40 (under proper lens installation and wiring) |
| Temperature | Working temperature: 0 °C to 50 °C (32 °F to 122 °F) Storage temperature: –30 °C to 80 °C (–22 °F to 176 °F) |
| Humidity | 20% RH to 95% RH (no condensation) |
| General | |
| Client software | MVS or frame grabber software meeting with CoaXPress Protocol |
| Operating system | 32/64-bit Windows 7/10, 64-bit Windows 11, and 32/64-bit Linux |
| Compatibility | CoaXPress, GenlCam |
| Certification | CE, RoHS, KC |
| HIKROBOT part no. | SM000077099 |
| Status | Being discontinued |
Key features
- Resolution of 2592 × 2160, pixel size of 2.5 µm × 2.5 µm.
- Adopts global shutter CMOS sensor to provide high dynamic range, SNR, and high-quality image.
- Supports LSC correction, super palette, CCM, and SuperBayer.
- Adopts CXP-6 interface to transmit data.
- Supports Off, Once, and Continuous exposure modes.
- Compatible with CoaXPress Protocol and GenICam Standard.
Where it is used
5 MP monochrome imaging at 213 fps targets full-resolution defect detection on high-speed production lines, position and size measurement of fast-moving parts, and high-speed event capture. The fine 2.5 μm pixel pitch resolves smaller detail within the same field of view, which makes electronic component and printed circuit inspection, micro-part assembly checks and vibration-sensitive measurement set-ups where a fanless body is preferred suitable fields.
Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.
Is this camera right for your application?
Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.
The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Source: HIKROBOT product data