HIKROBOT MV-CH050-10CC — Area Scan Cameras
5 MP, Sony IMX250, Camera Link, Color, 140 fps
For those who need color information at Camera Link speed, the MV-CH050-10CC is the 5 MP color option in the CH series: a 2/3″ Sony IMX250 global shutter sensor producing 140 fps at 2432 × 2048. Output can be taken as Bayer RG 8/10/12 or directly as RGB 8, and 40 dB SNR with 75.4 dB dynamic range is retained despite the color filter. Gain on this model spans 0–17 dB and exposure runs from 15 μs to 10 s.
Data travels over Camera Link with SDR interface to the frame grabber in Base, Medium, Full or 80-bit mode; when RGB 8 output is chosen, bandwidth needs should be planned accordingly. Trigger and status signals use the opto-isolated input (Line 0), opto-isolated output (Line 1) and bi-directional non-isolated line (Line 2) on the 6-pin P7 connector, which also carries the 9–24 VDC supply, with a typical draw of 3.41 W at 12 VDC. The compact 44 × 29 × 59 mm body of about 100 g comes with mounting holes, IP30 protection and a 0–50 °C operating range, and complies with Camera Link V2.0 and GenICam.
Specifications
| CH Series — High Resolution | |
|---|---|
| Model | MV-CH050-10CC |
| Performance | |
| Sensor type | CMOS, global shutter |
| Sensor model | Sony® IMX250 |
| Pixel size | 3.45 μm × 3.45 μm |
| Sensor size | 2/3″ |
| Resolution | 2432 × 2048 |
| Max. frame rate | 140 fps @2432 × 2048 |
| Configuration mode | Base, Medium, Full, 80-bit |
| Tap geometry | 1X2_1Y, 1X4_1Y, 1X8_1Y, 1X10_1Y |
| Tap number | 2 Taps, 4 Taps, 8 Taps, 10 Taps |
| Pixel clock | 60 MHz, 70 MHz, 85 MHz |
| Dynamic range | 75.4 dB |
| SNR | 40 dB |
| Gain | 0 dB to 17 dB |
| Exposure time | 15 μs to 10 sec |
| Exposure mode | Off/Once/Continuous exposure mode |
| Mono/color | Color |
| Pixel format | Bayer RG 8/10/12, RGB 8 |
| Binning | Not support |
| Decimation | Not support |
| Reverse image | Supports horizontal and vertical reverse image output |
| Electrical feature | |
| Data interface | Camera Link with SDR interface |
| Digital I/O | 6-pin P7 connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2). |
| Power supply | 9 VDC to 24 VDC |
| Power consumption | Typ. 3.41 W@12 VDC |
| Mechanical | |
| Lens mount | C-mount |
| Dimension | 44 mm × 29 mm × 59 mm (1.7″ × 1.1″ × 2.3″) |
| Weight | Approx. 100 g (0.2 lb.) |
| Ingress protection | IP30 (under proper lens installation and wiring) |
| Temperature | Working temperature: 0 °C to 50 °C (32 °F to 122 °F) Storage temperature: -30 °C to 70 °C (-22 °F to 158 °F) |
| Humidity | 20% to 80% RH, non-condensing |
| General | |
| Client software | MVS or frame grabber software meeting with GenlCam Protocol |
| Operating system | 32/64-bit Windows XP/7/10 |
| Compatibility | Camera Link V2.0, GenlCam |
| Certification | CE, RoHS, KC |
| HIKROBOT part no. | SM000025506 |
| Status | Available |
Key features
- Adopts global shutter CMOS sensor providing high signal-to-noise ratio, wide dynamic range, and high-quality image.
- Resolution of 2432 × 2048 and pixel size of 3.45 μm × 3.45 μm.
- Supports configuration modes of Base, Medium, Full and 80-bit via the Camera Link interface.
- Adopts compact design with mounting holes for flexible mounting.
Where it is used
Print and label inspection requiring color at high speed, color deviation checks on multi-color packaging lines and verification of component color codes on circuit boards are the natural fields for this camera. At 140 fps it can monitor color consistency on continuously moving web materials such as foil, paper and textiles, while the wide dynamic range helps in cosmetics and automotive interior part inspection, where glossy lacquered and matte surfaces are assessed in the same scene.
Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.
Is this camera right for your application?
Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.
The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Source: HIKROBOT product data