HIKROBOT MV-CS013-60GN — Area Scan Cameras
1.3 MP, Stacked BSI, GigE, NIR, 59.2 fps
The MV-CS013-60GN is the near-infrared (NIR) specialist of the 1.3 MP class in the CS series: a 2/3″ Stacked BSI global-shutter CMOS delivering 59.2 fps at 1224 × 1024. Its 6.9 μm × 6.9 μm pixels, 42.4 dB SNR and 73.9 dB dynamic range are aimed at capturing detail under NIR illumination that visible light cannot resolve. Gain adjusts from 0 to 20 dB and exposure from 30 μs to 10 s.
The 1000 Mbit/s Gigabit Ethernet link runs up to 100 m without a repeater and is compatible with 100 Mbit/s Fast Ethernet; it can be PoE-powered or fed 9–24 VDC, drawing a typical 1.9 W at 12 VDC. The 6-pin P7 connector provides the opto-isolated input/output and bi-directional Line 2, and the sequencer function switches gain and exposure sets automatically for different NIR lighting conditions. This C-mount camera with Mono 8/10/12 output slots into existing GigE infrastructure with its 29 × 29 × 42 mm body, four-side mounting holes and GigE Vision V2.0 / GenICam compliance.
Specifications
| CS Series — Small & Medium Resolution | |
|---|---|
| Model | MV-CS013-60GN |
| Performance | |
| Sensor type | CMOS, global shutter |
| Sensor model | Stacked BSI |
| Pixel size | 6.9 μm × 6.9 μm |
| Sensor size | 2/3″ |
| Resolution | 1224 × 1024 |
| Max. frame rate | 59.2 fps @ 1224 × 1024 Mono 8 |
| Dynamic range | 73.9 dB |
| SNR | 42.4 dB |
| Gain | 0 dB to 20 dB |
| Exposure time | 30 μs to 10 sec |
| Exposure mode | Off/Once/Continuous exposure mode |
| Mono/color | Near-infrared |
| Pixel format | Mono 8/10/10Packed/12/12Packed |
| Binning | Not supported |
| Decimation | Supports 1 × 1, 2 × 2, 4 × 4 |
| Reverse image | Supports horizontal and vertical reverse image output |
| Electrical feature | |
| Data interface | Gigabit Ethernet (1000 Mbit/s), compatible with Fast Ethernet (100 Mbit/s) |
| Digital I/O | 6-pin P7 connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2). |
| Power supply | 9 VDC to 24 VDC, supports PoE |
| Power consumption | Typ. 1.9 W @ 12 VDC |
| Mechanical | |
| Lens mount | C-mount |
| Dimension | 29 mm × 29 mm × 42 mm (1.1″ × 1.1″ × 1.7″) |
| Weight | Approx. 100 g (0.2 lb.) |
| Ingress protection | IP40 (under proper lens installation and wiring) |
| Temperature | Working temperature: –30 °C to 60 °C (–22 °F to 140 °F) Storage temperature: –30 °C to 70 °C (–22 °F to 158 °F) |
| Humidity | 20% RH to 95% RH (No condensation) |
| General | |
| Client software | MVS or third-party software meeting with GigE Vision Protocol |
| Operating system | 32/64-bit Windows 7/10, 64-bit Windows 11, and 32/64-bit Linux |
| Compatibility | GigE Vision V2.0, GenICam |
| Certification | CE, RoHS, KC |
| HIKROBOT part no. | M000117663 |
| Status | Available |
Key features
- Adopts brand new design to reduce power consumption.
- Supports auto or manual adjustment of gain, exposure time, LUT, etc., and supports Sequencer function.
- Compact design with mounting holes on panels for flexible mounting from 4 sides.
- Adopts GigE interface and max. transmission distance of 100 meters without relay.
- Compatible with GigE Vision V2.0 Protocol, GenICam Standard, and third-party software based on the protocol and standard.
Where it is used
NIR sensitivity pays off where visible light falls short: detecting bruises and rot in produce, checking contents behind tinted or opaque films, making moisture and water-content differences visible, and verifying security marks meant to be read under NIR light. The 1.3 MP resolution gives sufficient detail for these scenes while 59.2 fps matches medium-speed lines. Because NIR illumination is invisible to the eye, it can be used at manned stations without disturbing operators.
Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.
Is this camera right for your application?
Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.
The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Source: HIKROBOT product data