HIKROBOT MV-CS004-11GM — Area Scan Cameras

0.4 MP, Sony IMX287, GigE, Mono, 312.9 fps

HIKROBOT MV-CS004-11GM

Status: Available

HIKROBOT part no.: SM000043083

Request a quote and stock check

The MV-CS004-11GM brings the Sony IMX287 global-shutter sensor to the GigE interface as a 0.4 MP monochrome model, the faster alternative to the IMX297-based 10GM in the small-resolution class of the CS series. It delivers 312.9 fps at 720 × 540 in Mono 8 and, at 43 dB, the highest SNR on this sheet together with 73.6 dB dynamic range. Exposure is set continuously in a single mode from 1 μs up to 10 seconds.

Gigabit Ethernet carries the 312.9 fps Mono 8 stream while permitting up to 100 m of cable without a repeater; PoE gives single-cable installation, or 9–24 VDC applies (typ. 2.2 W at 12 VDC). The opto-isolated input/output and bi-directional Line 2 on the 6-pin P7 connector support hardware trigger, software trigger and free-run, and the sequencer function switches exposure/gain sets frame by frame. The 29 × 29 × 42 mm housing and GigE Vision V2.0 / GenICam compliance make it straightforward to integrate into network-based multi-camera systems.

Specifications

CS Series — Small & Medium Resolution
ModelMV-CS004-11GM
Performance
Sensor typeCMOS, global shutter
Sensor modelSony® IMX287
Pixel size6.9 μm × 6.9 μm
Sensor size1/2.9″
Resolution720 × 540
Max. frame rate312.9 fps @720 × 540 Mono 8
Dynamic range73.6 dB
SNR43 dB
Gain0 dB to 24 dB
Exposure time1 μs to 10 sec
Exposure modeOff/Once/Continuous exposure mode
MonoMono
Pixel formatMono 8/10/10Packed/12/12Packed
BinningSupports 1 × 1, 2 × 2, 4 × 4
DecimationSupports 1 × 1, 2 × 2
Reverse imageSupports horizontal and vertical reverse image output
Electrical feature
Data interfaceGigabit Ethernet, compatible with Fast Ethernet
Digital I/O6-pin P7 connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2).
Power supply9 VDC to 24 VDC, supports PoE
Power consumptionTyp. 2.2 W@12 VDC
Mechanical
Lens mountC-mount
Dimension29 mm × 29 mm × 42 mm (1.1″ × 1.1″ × 1.2″)
WeightApprox. 100 g (0.22 lb.)
Ingress protectionIP40 (under proper lens installation and wiring)
TemperatureWorking temperature: –30 °C to 60 °C (–22 °F to 140 °F)
Storage temperature: –30 °C to 70 °C (–22 °F to 158 °F)
Humidity20% RH to 80% RH (no condensation)
General
Client softwareMVS or third-party software meeting with GigE Vision Protocol
Operating system32/64-bit Windows 7/10, 32/64-bit Linux
CompatibilityGigE Vision V2.0, GenICam
CertificationCE, RoHS, KC
HIKROBOT part no.SM000043083
StatusAvailable

Key features

  • Adopts brand new design to reduce power consumption.
  • Compact design with mounting holes on panels for flexible mounting from 4 sides.
  • Supports sequencer, contrast ratio, Gamma correction, white balance, etc.
  • Supports hard trigger, software trigger, free run, etc.
  • Compatible with GigE Vision V2.0 Protocol, GenICam Standard, and third-party software based on the protocol and standard.

Where it is used

High SNR and 300+ fps suit fast edge detection on low-contrast surfaces, fill-level checks through transparent packaging and part-position confirmation on presses or cutting machines. The long GigE reach lets the camera sit at a remote point on the line and report to a central processor. With exposure extending to 10 seconds, the same camera also covers static low-light inspections.

Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.

Is this camera right for your application?

Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.

Request a quote Other models in the series

The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.

Source: HIKROBOT product data

← CS Series — Small & Medium Resolution