HIKROBOT MV-CL082-92CM(V2.0) — Line Scan Cameras
8192×2, Camera Link, Mono, 200 kHz (ROI)
The MV-CL082-92CM(V2.0) is an 8192×2 mono line-scan camera with a Camera Link interface. It uses ROI to push the line rate up to 200 kHz in 1-line mode, and offers manually adjustable ISP functions — Gamma correction, FFC, LUT, and black level — for fine image tuning. Compliance with the Camera Link protocol and the GenlCam standard makes it straightforward to integrate into existing frame-grabber-based vision setups.
Specifications
| CL Series — Line Scan | |
|---|---|
| Model | MV-CL082-92CM(V2.0) |
| Performance | |
| Sensor type | CMOS |
| Pixel size | 7 μm |
| Resolution | 8192 × 2 |
| Image mode | Supports 1-line, 2-TDI |
| Max. line rate | 20 kHz (Base), 40 kHz (Medium), 80 kHz (Full), 100 kHz (80-bit) |
| Configuration mode | Base, Medium, Full, 80-bit |
| Tap geometry | 1 × 2, 1 × 4, 1 × 8, 1 × 10 |
| Tap number | 2 Taps, 4 Taps, 8 Taps, 10 Taps |
| Pixel clock | 40 MHz, 66 MHz, 80 MHz, 85 MHz |
| Dynamic range | 63.4 dB |
| Mono/color | Mono |
| SNR | 40.8 dB |
| Gain | Supports 1.0 × |
| Exposure time | 3 μs to 10 ms |
| Exposure mode | Off/ Once/ Continuous exposure mode; supports fixed time exposure, trigger-width exposure |
| Pixel format | Mono 8/10/12 |
| Binning | Supports 1 × 1, 2 × 2, 4 × 4 |
| Reverse image | Supports horizontal reverse image output |
| Trigger mode | External trigger, internal trigger |
| External trigger mode | Line trigger, frame trigger, line + frame trigger |
| Electrical feature | |
| Data interface | Camera Link (SDR connector); USB interface for updating firmware |
| Digital I/O | 12-pin P10 connector provides power and I/O: configurable input/output × 4 (Line 0/1/3/4) and support single-ended/differential. Camera Link provides I/O (CC1/CC2/CC3/CC4). |
| Power supply | 12 VDC to 24 VDC |
| Power consumption | Typ. 9.8 W @ 12 VDC |
| Mechanical | |
| Lens mount | M72*0.75, flange back length 12 mm, applicable to F-mount via lens adapter |
| Dimension | 76 mm × 76 mm × 42.1 mm (3.0″ × 3.0″ × 1.7″) |
| Weight | Approx. 320 g (0.7 lb.) |
| Ingress protection | IP40 (under proper lens installation and wiring) |
| Temperature | Working temperature: –20 °C to 55 °C (–4 °F to 131 °F) Storage temperature : –30 °C to 80 °C (–22 °F to 176 °F) |
| Humidity | 5% RH to 90% RH (no condensation) |
| General | |
| Client software | MVS and frame grabber software meeting with Camera Link Protocol |
| Operating system | 32/64-bit Windows 7/10, 64-bit Windows 11 |
| Compatibility | Camera Link V1.2, GenICam |
| Certification | CE, RoHS2.0, KC |
| Product identity | |
| HIKROBOT part no. | M000189272 |
| Status | Available |
Key features
- Supports multiple exposure and image acquisition modes.
- Adopts multiple ISP technologies with manual adjustment for Gamma correction, FFC correction, LUT, and black level.
- Supports ROI to increase line rate (max. 200 kHz in 1-line mode).
- Supports bi-directional I/O wiring for flexible input/output settings.
- Compact design with flexible installation.
- Compatible with the Camera Link protocol and GenlCam standard.
Where it is used
Thanks to the low-latency, deterministic data transfer of Camera Link, the MV-CL082-92CM(V2.0) integrates readily into existing frame-grabber-based vision systems on printing, textile, or film lines. The ROI-boosted line rate helps catch mono-contrast defects such as streaks or stains on medium-to-high-speed moving rolls or sheets. It is a natural fit for integrators upgrading cameras while keeping their existing Camera Link frame-grabber infrastructure.
Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.
Is this camera right for your application?
Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.
The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Source: HIKROBOT product data