HIKROBOT MV-CL042-91CM-V2 — Line Scan Cameras
4096×2, Camera Link, Mono, 195 kHz
The MV-CL042-91CM-V2 is a 4096×2 monochrome line-scan camera from HIKROBOT’s CL Series, built around a Camera Link interface. It applies multiple ISP tools — manually adjustable Gamma correction, flat correction, LUT, and black level — and supports multiple exposure and acquisition modes with a maximum line rate of 195 kHz.
Specifications
| CL Series — Line Scan | |
|---|---|
| Model | MV-CL042-91CM-V2 |
| Performance | |
| Sensor type | CMOS |
| Pixel size | 7 μm |
| Resolution | 4096 × 2 |
| Image mode | Supports 1-line and 2-TDI |
| Max. line rate | 40.5 kHz (Base), 81 kHz (Medium), 162 kHz (Full), 195 kHz (80-bit) |
| Configuration mode | Base, Medium, Full, 80-bit |
| Tap geometry | 1 × 2, 1 × 4, 1 × 8, 1 × 10 |
| Tap number | 2 Taps, 4 Taps, 8 Taps, 10 Taps |
| Pixel clock | 40 MHz, 66 MHz, 80 MHz, 85 MHz |
| Dynamic range | 65.6 dB |
| SNR | 40 dB |
| Gain | Supports 1.0 ×, 1.4 ×, 1.6 ×, 2.4 ×, 3.2 × |
| Exposure time | 3 μs to 10 ms |
| Exposure mode | Off/ Once/ Continuous exposure mode; supports fixed time exposure, trigger-width exposure |
| Mono | Mono |
| Pixel format | Mono 8/10/12 |
| Binning | Supports 1 × 1, 1 × 2, 1 × 4, 2 × 1, 2 × 2, 2 × 4, 4 × 1, 4 × 2, 4 × 4 |
| Reverse image | Supports horizontal reverse image output |
| Trigger mode | External trigger, internal trigger |
| External trigger mode | Line trigger, frame trigger, line + frame trigger |
| Electrical feature | |
| Data interface | Camera Link (SDR connector); USB interface for updating firmware |
| Digital I/O | 12-pin P10 connector provides power and I/O: configurable input/output × 4 (Line 0/1/3/4) and support single-ended/differential. Camera Link provides I/O (CC1/CC2/CC3/CC4). |
| Power supply | 12 VDC to 24 VDC |
| Power consumption | Typ. 8 W @ 12 VDC |
| Mechanical | |
| Lens mount | M42*1.0, flange back length 12 mm, applicable to F-mount, C-mount and lens of other types via lens adapter |
| Dimension | 62 mm × 62 mm × 36.9 mm (2.4″ × 2.4″ × 1.5″) |
| Weight | Approx. 238 g (0.5 lb.) |
| Ingress protection | IP40 (under proper lens installation and wiring) |
| Temperature | Working temperature: –20 °C to 45 °C (–4 °F to 113 °F) Storage temperature : –30 °C to 80 °C (–22 °F to 176 °F) |
| Humidity | 5% RH to 95% RH (no condensation) |
| General | |
| Client software | MVS and frame grabber software meeting with Camera Link Protocol |
| Operating system | 32/64-bit Windows 7/10, 64-bit Windows 11 |
| Compatibility | Camera Link V2.1, GenICam |
| Certification | CE, RoHS, KC |
| Product identity | |
| HIKROBOT part no. | M000080361 |
| Status | Available |
Key features
- Adopts multiple ISP technologies and supports manual adjustment for Gamma correction, flat correction, LUT, and black level.
- Supports multiple exposure and image acquisition methods with a max. line rate of 195 kHz.
- Supports bi-directional I/O wiring for flexible input/output settings.
- Compact design and flexible installation.
- Compatible with Camera Link Protocol and GenICam Standard.
Where it is used
With its Camera Link interface and high line rate, this camera suits high-speed continuous-web inspection lines — printing, film, and metal strip — where short cable runs to a frame grabber are practical. Its mono sensor is well suited to surface-defect, scratch, and texture-contrast inspection where color information is not required.
Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.
Is this camera right for your application?
Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.
The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Source: HIKROBOT product data