HIKROBOT MV-CL043-A1GM-V2 — Line Scan Cameras
4096×3, GigE, Mono
The MV-CL043-A1GM-V2 is a mono (black-and-white) member of HIKROBOT’s CL Series GigE line scan family, offering 4096×3 resolution over a standard GigE interface. It supports both 1-line and TDI imaging modes and integrates multiple ISP algorithms — including Gamma correction, flat-field correction and gain — for on-site image tuning. Its bi-directional I/O wiring and compact design make it easy to install in flexible line configurations.
Specifications
| CL Series — Line Scan | |
|---|---|
| Model | MV-CL043-A1GM-V2 |
| Performance | |
| Sensor type | CMOS |
| Pixel size | 7 μm × 7 μm |
| Resolution | 4096 × 3 |
| Image mode | Supports 1 Line / 2 TDI / 3 TDI |
| Max. line rate | 28 kHz @ Mono 8, 14 kHz @ Mono 10/12 |
| Dynamic range | 66.2 dB |
| SNR | 39 dB |
| Gain | Supports 1.0 ×, 2.0 ×, 4.0 × |
| Exposure time | 1 μs to 10 ms |
| Exposure mode | Off/ Once/ Continuous exposure mode, and supports trigger-width exposure |
| Mono | Mono |
| Pixel format | Mono 8/10/12 |
| Binning | Supports 1 × 1, 1 × 2, 1 × 4, 2 × 1, 2 × 2, 2 × 4, 4 × 1, 4 × 2, 4 × 4 |
| Reverse image | Supports horizontal reverse image output |
| Trigger mode | External trigger, internal trigger |
| External trigger mode | Line trigger, frame trigger, line + frame trigger |
| Electrical feature | |
| Data interface | Gigabit Ethernet, compatible with Fast Ethernet |
| Digital I/O | 12-pin P10 connector provides power and I/O: configurable input/output × 4 (Line 0/1/3/4), supports single-end/differential |
| Power supply | 12 VDC to 24 VDC |
| Power consumption | Typ. 3.9 W @ 12 VDC |
| Mechanical | |
| Lens mount | M42*1.0, flange back length 12 mm, applicable to F-mount, C-mount and others via adapter |
| Dimension | 62 mm × 62 mm × 41 mm (2.4″ × 2.4″ × 1.6″) |
| Weight | Approx. 280 g (0.6 lb.) |
| Ingress protection | IP40 (under proper lens installation and wiring) |
| Temperature | Working temperature: –20 °C to 50 °C (–4 °F to 122 °F) Storage temperature: –30 °C to 80 °C (–22 °F to 176 °F) |
| Humidity | 5% RH to 90% RH (no condensation) |
| General | |
| Client software | MVS or the third-party software meeting with GigE Vision protocol |
| Operating system | 32/64-bit Windows XP/7/10, 32/64-bit Linux, and 64-bit MacOS |
| Compatibility | GigE Vision V2.0, GenICam |
| Certification | CE, RoHS, KC |
| Product identity | |
| HIKROBOT part no. | SM000061980 |
| Status | Available |
Key features
- Supports 1-line and TDI imaging.
- Integrates multiple ISP image algorithms and functions such as Gamma correction, flat-field correction, gain, etc.
- Adopts bi-directional I/O wiring for flexible input/output configuration.
- Compact design and flexible installation.
- Compatible with GigE Vision V2.0 and GenlCam standard.
Where it is used
With its standard GigE interface and moderate cost, this camera suits entry-to-mid-level mono line scan inspection on continuous web or sheet lines such as printing, textiles, film and general surface inspection. The ability to switch between 1-line and TDI modes lets the same camera adapt to lower-light conditions. Compatibility with GigE Vision V2.0 and GenlCam simplifies integration with existing machine vision software.
Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.
Is this camera right for your application?
Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.
The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Source: HIKROBOT product data