HIKROBOT MV-CU060-60GM V2 — Area Scan Cameras
6 MP, BSI CMOS, GigE, Mono, 19 fps
With a pixel size as small as 2 μm × 2 μm, the MV-CU060-60GM V2 delivers monochrome 3200 × 1944 images from a 1/2.4″ BSI CMOS rolling-shutter sensor and reaches 19 fps in Mono 8. Positioned in the cost-effective GigE family of the CU series, it combines 33.8 dB SNR and 64 dB dynamic range with a 0–24 dB gain range, and its 52 μs to 10 s exposure covers both short and long exposure scenarios. Storage temperature is –30 °C to 80 °C and working temperature 0 °C to 50 °C.
On the cabling side, Gigabit Ethernet (1000 Mbit/s) with Fast Ethernet (100 Mbit/s) compatibility and 100 m repeater-free reach make it easy to place the camera far from the control cabinet; 9–24 VDC is supplied through the P7 connector or optional PoE is used, with typical consumption of 1.6 W at 12 VDC. The same 6-pin connector carries Line 0 (opto-isolated input), Line 1 (opto-isolated output) and Line 2 (bi-directional non-isolated I/O). The compact 29 mm × 29 mm × 42 mm C-mount body weighs about 100 g; automatic and manual adjustment is offered for gain and exposure, manual adjustment for LUT and Gamma, and GigE Vision V2.0 / GenICam compliance brings third-party software support.
Specifications
| CU Series — Cost-effective | |
|---|---|
| Model | MV-CU060-60GM V2 |
| Performance | |
| Sensor type | CMOS, rolling shutter |
| Sensor model | BSI |
| Pixel size | 2 μm × 2 μm |
| Sensor size | 1/2.4″ |
| Resolution | 3200 × 1944 |
| Max. frame rate | 19 fps @ 3200 × 1944 Mono 8 |
| Dynamic range | 64 dB |
| SNR | 33.8 dB |
| Gain | 0 dB to 24 dB |
| Exposure time | 52 μs to 10 sec |
| Mono/color | Mono |
| Exposure mode | Off/Once/Continuous exposure mode |
| Pixel format | Mono 8/10/10Packed/12/12Packed |
| Binning | Supports 1 × 1, 2 × 2, 4 × 4 |
| Decimation | Supports 1 × 1, 2 × 2, 4 × 4 |
| Reverse image | Supports horizontal and vertical reverse image output |
| Electrical feature | |
| Data interface | Gigabit Ethernet (1000 Mbit/s), compatible with Fast Ethernet (100 Mbit/s) |
| Digital I/O | 6-pin P7 connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2). |
| Power supply | 9 VDC to 24 VDC, PoE is optional |
| Power consumption | Typ. 1.6 W @ 12 VDC |
| Mechanical | |
| Lens mount | C-mount |
| Dimension | 29 mm × 29 mm × 42 mm (1.1″ × 1.1″ × 1.7″) |
| Weight | Approx. 100 g (0.2 lb.) |
| Ingress protection | IP30 (under proper lens installation and wiring) |
| Temperature | Working temperature: 0 °C to 50 °C (32 °F to 122 °F) Storage temperature: –30 °C to 80 °C (–22 °F to 176 °F) |
| Humidity | 20% RH to 95% RH (no condensation) |
| General | |
| Client software | MVS or third-party software meeting with GigE Vision Protocol |
| Operating system | 32/64-bit Windows 7/10, 64-bit Windows 11, 32/64-bit Linux |
| Compatibility | GigE Vision V2.0, GenICam |
| Certification | CE, RoHS, KC |
| HIKROBOT part no. | SM000105991 |
| Status | Available |
Key features
- Adopts low consumption design with stable performance.
- Supports auto or manual adjustment of gain, exposure time, and manual adjustment of LUT, Gamma correction, etc.
- Adopts GigE interface and max. transmission distance of 100 meters without relay.
- Adopts compact design to meet small spatial requirements.
- Compatible with GigE Vision V2.0 Protocol, GenICam Standard, and third-party software based on the protocol and standard.
Where it is used
This mono model is an economical answer for jobs that need moderate detail across a wide, horizontal field of view: edge and width monitoring on extrusion profile and pipe lines, paper and cardboard cutting checks, and counting parts in trays with detection of empty pockets. Exposure up to 10 s together with manual Gamma/LUT adjustment helps bring out detail on low-contrast surfaces, for instance embossed text on light-colored plastic or paper. The 19 fps rate matches product flows that advance continuously on a conveyor without demanding high speed.
Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.
Is this camera right for your application?
Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.
The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Source: HIKROBOT product data