HIKROBOT MV-CU050-30GC V2 — Area Scan Cameras
5 MP, AR0521, GigE, Color, 24 fps
The MV-CU050-30GC V2 is the 5 MP color GigE member of the cost-effective CU series, capturing 2592 × 1944 pixels from the AR0521 rolling-shutter CMOS sensor at up to 24 fps full-frame. The 1/2.5-inch sensor has a 2.2 μm × 2.2 μm pixel, 37 dB SNR and 63 dB dynamic range. On the datasheet this model is listed with CE, RoHS and KC certification and with PoE as an optional power configuration.
The camera runs from 9–24 VDC, PoE is offered as an option and typical consumption is 1.81 W at 12 VDC. The Gigabit Ethernet (1000 Mbit/s) link is Fast Ethernet compatible and can be pulled up to 100 meters without a repeater; the 6-pin P7 connector provides an opto-isolated input (Line 0) for hardware triggering, an opto-isolated output (Line 1) for a lighting or PLC signal and a bi-directional non-isolated line (Line 2), with software trigger and free-run also supported. The 29 mm × 29 mm × 42 mm C-mount housing weighs about 100 g and works with third-party software built on GigE Vision V2.0 and GenICam.
Specifications
| CU Series — Cost-effective | |
|---|---|
| Model | MV-CU050-30GC V2 |
| Performance | |
| Sensor type | CMOS, rolling shutter |
| Sensor model | AR0521 |
| Pixel size | 2.2 μm × 2.2 μm |
| Sensor size | 1/2.5″ |
| Resolution | 2592 × 1944 |
| Max. frame rate | 24 fps @ 2592 × 1944 Bayer GR 8 |
| Dynamic range | 63 dB |
| SNR | 37 dB |
| Gain | 0 dB to 15 dB |
| Exposure time | 21 μs to 1 sec |
| Mono/color | Color |
| Exposure mode | Off/Once/Continuous exposure mode |
| Pixel format | Bayer GR 8/10/10Packed/12/12Packed |
| Binning | Supports 1 × 1, 2 × 2 |
| Decimation | Supports 1 × 1, 2 × 2 |
| Reverse image | Supports horizontal and vertical reverse image output |
| Electrical feature | |
| Data interface | Gigabit Ethernet (1000 Mbit/s), compatible with Fast Ethernet (100 Mbit/s) |
| Digital I/O | 6-pin P7 connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2). |
| Power supply | 9 VDC to 24 VDC, PoE is optional |
| Power consumption | Typ. 1.81 W @ 12 VDC |
| Mechanical | |
| Lens mount | C-mount |
| Dimension | 29 mm × 29 mm × 42 mm (1.1″ × 1.1″ × 1.7″) |
| Weight | Approx. 100 g (0.2 lb.) |
| Ingress protection | IP30 (under proper lens installation and wiring) |
| Temperature | Working temperature: 0 °C to 50 °C (32 °F to 122 °F) Storage temperature: –30 °C to 80 °C (–22 °F to 176 °F) |
| Humidity | 20% RH to 80% RH (no condensation) |
| General | |
| Client software | MVS or third-party software meeting with GigE Vision Protocol |
| Operating system | 32/64-bit Windows 7/10, 64-bit Windows 11, 32/64-bit Linux |
| Compatibility | GigE Vision V2.0, GenICam |
| Certification | CE, RoHS, KC |
| HIKROBOT part no. | SM000105987 |
| Status | Available |
Key features
- Adopts low consumption design with stable performance.
- Supports auto or manual adjustment of gain, exposure time etc.
- Supports hardware trigger, software trigger and free run, etc.
- Adopts GigE interface and max. transmission distance of 100 meters without relay.
- Compatible with GigE Vision V2.0 Protocol, GenICam Standard, and third-party software based on the protocol and standard.
Where it is used
Color at 2592 × 1944 suits work that needs fine detail over a fairly wide field, such as verifying component color and polarity marks in electronics assembly, checking color sequence in wire harnesses, and inspecting tablet color and fill in pharmaceutical blisters. At 24 fps, stationary or slowly advancing parts are captured comfortably. This version can be chosen for projects that call for CE, RoHS and KC certification.
Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.
Is this camera right for your application?
Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.
The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Source: HIKROBOT product data