HIKROBOT MV-CU020-19GC(850nm) V3 — Area Scan Cameras
2 MP, 1/2.8-inch CMOS, GigE, Mono, 850 nm bandpass, 56 fps
The MV-CU020-19GC(850nm) V3 is a 1920 × 1080 monochrome GigE camera supplied, as its product name states, with an 850 nm bandpass filter. Its 1/2.8-inch rolling-shutter CMOS sensor with a 2.9 μm × 2.9 μm pixel delivers 56 fps, 45.6 dB SNR and a 74 dB dynamic range rising to 90 dB in WDR mode; what distinguishes this model within the cost-effective CU series is the optical filter that passes only the 850 nm band. Gain spans 0–24 dB and exposure runs from 64 μs to 130 ms.
Power is supplied over PoE or from 9–24 VDC with a typical draw of 2.4 W at 12 VDC, and the GigE link can be extended to 100 meters with no repeater. Triggering works in hardware, software or free-run mode through the 6-pin P7 connector, which provides an opto-isolated input (Line 0), an opto-isolated output (Line 1) and a bi-directional non-isolated line (Line 2). The 29 mm × 29 mm × 42 mm, roughly 100 g C-mount body follows the GigE Vision V2.0 and GenICam standards, and noise reduction and sharpness functions are handled inside the camera.
Specifications
| CU Series — Cost-effective | |
|---|---|
| Model | MV-CU020-19GC(850nm) V3 |
| Performance | |
| Sensor type | CMOS, rolling shutter |
| Pixel size | 2.9 μm × 2.9 μm |
| Sensor size | 1/2.8″ |
| Resolution | 1920 × 1080 |
| Max. frame rate | 56 fps @ 1920 × 1080 Mono 8 |
| Dynamic range | 74 dB 90 dB @ WDR |
| SNR | 45.6 dB |
| Gain | 0 dB to 24 dB |
| Exposure time | 64 μs to 130 ms |
| Exposure mode | Off/Once/Continuous exposure mode |
| Mono/color | Mono |
| Pixel format | Mono 8 |
| Binning | Supports 1 × 1, 2 × 2 |
| Decimation | Not supported |
| Reverse image | Supports horizontal and vertical reverse image output |
| Electrical feature | |
| Data interface | Gigabit Ethernet (1000 Mbit/s), compatible with Fast Ethernet (100 Mbit/s) |
| Digital I/O | 6-pin P7 connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2). |
| Power supply | 9 VDC to 24 VDC, supports PoE |
| Power consumption | Typ. 2.4 W @ 12 VDC |
| Mechanical | |
| Lens mount | C-mount |
| Dimension | 29 mm × 29 mm × 42 mm (1.1″ × 1.1″ × 1.7″) |
| Weight | Approx. 100 g (0.2 lb.) |
| Ingress protection | IP30 (under proper lens installation and wiring) |
| Temperature | Working temperature: 0 °C to 50 °C (32 °F to 122 °F) Storage temperature: –30 °C to 80 °C (–22 °F to 176 °F) |
| Humidity | 20% RH to 80% RH (no condensation) |
| General | |
| Client software | MVS or third-party software meeting with GigE Vision Protocol |
| Operating system | 32/64-bit Windows 7/10, 64-bit Windows 11, 32/64-bit Linux |
| Compatibility | GigE Vision V2.0, GenICam |
| Certification | CE, RoHS, KC |
| HIKROBOT part no. | SM000103052 |
| Status | Available |
Key features
- Adopts low consumption platform with stable performance.
- Supports wide dynamic range, noise reduction, and sharpness functions.
- Customized filter with strong anti-interference ability is optional.
- Supports hardware trigger, software trigger, and anyway mode, etc.
- Adopts GigE interface and max. transmission distance of 100 meters without relay.
- Compatible with GigE Vision V2.0 Protocol, GenICam Standard, and third-party software based on the protocol and standard.
Where it is used
The 850 nm bandpass filter is intended for setups using 850 nm illumination, letting the camera work without being affected by ambient light outside that band; this suits position and presence detection at open passages and gate areas where daylight or plant lighting varies. The combination of monochrome 1080p and WDR tolerates the brightness contrasts found in such scenes. It fits fixed monitoring points where color is not needed and lighting is hard to control.
Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.
Is this camera right for your application?
Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.
The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Source: HIKROBOT product data