HIKROBOT MV-CE100-30GC — Area Scan Cameras

10 MP, MT9J003, GigE, Color, 7 fps

HIKROBOT MV-CE100-30GC

Status: Being discontinued

HIKROBOT part no.: SM000025498

Request a quote and stock check

MV-CE100-30GC carries one of the highest resolutions in this group: an MT9J003 rolling shutter sensor delivering 10 MP color images at 3840×2748. The small 1.67 μm pixel size pushes resolution up, but caps maximum speed at 7 fps, and its 34 dB SNR / 65 dB dynamic range are more modest than the rest of the lineup — a resolution-first, speed-second profile. HIKROBOT lists this model as ‘Delisting Preparation’.

The GigE interface supports cable runs up to 100 m without a repeater; the 6-pin Hirose connector carries 12 VDC external power or PoE, plus I/O (one opto-isolated input, one opto-isolated output, one bidirectional line). Up to 128 MB of onboard memory handles burst transmission and retransmission, adding data reliability when large high-resolution frames cross the network. Its protocol compliance sits at GigE Vision V1.2 — older than the V2.0 used by some other CE models — while GenICam support is retained.

Specifications

CE Series — Economical Area Scan
ModelMV-CE100-30GC
Performance
Sensor typeCMOS, rolling shutter
Sensor modelMT9J003
Pixel size1.67 μm × 1.67 μm
Sensor size1/2.3″
Resolution3840 × 2748
Max. frame rate7 fps @ 3840 × 2748
Dynamic range65 dB
SNR34 dB
Gain0 dB to 15.3 dB
Exposure time50 μs to 2 sec
Exposure modeOff/Once/Continuous exposure mode
MonoColor
Pixel formatMono 8/10/12, Bayer GR 8/10/10p/12/12p
YUV422Packed,YUV422_YUYV_Packed, RGB 8
BinningSupports 1 × 1, 2 × 2
DecimationNot support
Reverse imageSupports horizontal reverse image output
Image buffer128 MB
Electrical feature
Data interfaceGigabit Ethernet, compatible with Fast Ethernet
Digital I/O6-pin Hirose connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2).
Power supply12 VDC, supports PoE
Power consumptionTyp. 2.6 W @ 12 VDC
Mechanical
Lens mountC-mount
Dimension29 mm × 29 mm × 42 mm (1.1″ × 1.1″ × 1.7″)
WeightApprox. 68 g (0.15 lb.)
Ingress protectionIP30 (under proper lens installation and wiring)
TemperatureWorking temperature: 0 °C to 50 °C (32 °F to 122 °F)
Storage temperature: –30 °C to 70 °C (–22 °F to 158 °F)
Humidity20% RH to 80% RH (no condensation)
General
Client softwareMVS or third-party software meeting with GigE Vision Protocol
Operating system32/64-bit Windows 7/10, 32/64-bit Linux
CompatibilityGigE Vision V1.2, GenICam
CertificationCE, RoHS, KC
HIKROBOT part no.SM000025498
StatusBeing discontinued

Key features

  • Adopts GigE interface and max. transmission distance of 100 meters without relay.
  • Up to 128 MB local memory for burst transmission and retransmission.
  • Supports auto exposure control, LUT, Gamma correction, etc.
  • Supports hardware trigger, software trigger, etc.
  • Compatible with GigE Vision V1.2 Protocol, GenICam Standard, and third-party software based on the protocol and standard.

Where it is used

10 MP resolution suits tasks where detail matters more than speed — fine defect detection over a large product surface, multi-character print/label legibility checks, or dimensional measurement on static or near-static scenes. It fits quality-control stations that don’t need a fast line rate.

Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.

Is this camera right for your application?

Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.

Request a quote Other models in the series

The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.

Source: HIKROBOT product data

← CE Series — Economical Area Scan