TELEMECANIQUE XSDC607319 — Rectangular Inductive Sensors

The Telemecanique XSDC607319 is an inductive proximity sensor from the XSD series in form 80×80×40 mm with a plastic enclosure. It is non-flush mountable with a nominal sensing distance of 60 mm and a frontal sensing face. The 2-wire DC output, supplied at 12–48 V DC, provides one normally open and one normally closed function (1 NO + 1 NC). Switching capacity is 1.5–100 mA and the switching frequency reaches 20 Hz.

Electrical connection is made to screw-clamp terminals inside the housing; the cable enters through a single tapped entry for a Pg 13.5 cable gland. The data sheet gives the dimensions as 80 mm wide, 100 mm high and 40 mm deep. The enclosure and sensing face are plastic. The degree of protection is IP67 and the operating temperature range is -25 °C to +70 °C. The product carries CE marking and CCC certification.

Telemecanique XSDC607319 technical specifications

Key features

• Plastic housing in form 80×80×40 mm
• Nominal sensing distance Sn 60 mm, non-flush
• 2-wire DC output, 1 NO + 1 NC, 1.5–100 mA
• 12–48 V DC supply
• Screw-clamp terminals, Pg 13.5 cable entry
• IP67 degree of protection

XSDC607319 ordering codes

Other Telemecanique Rectangular Inductive Sensors

• TELEMECANIQUE XS7E1A1PAL2 — Inductive proximity sensor, flat form 26×26×13 mm, flush
• TELEMECANIQUE XS9C111A1L2 — Inductive proximity sensor with analogue output, flat form 40×40×15 mm, 0–10 V
• TELEMECANIQUE XS8C2A1NCM12 — Inductive proximity sensor, 40×40×70 mm, turret head, flush, M12
• TELEMECANIQUE XS8C4A1PCG13 — Inductive proximity sensor, 40×40×117 mm, turret head, terminals, flush
• TELEMECANIQUE XS8E1A1MAL2 — Inductive proximity sensor, flat form 26×26×13 mm, 2-wire AC/DC
• TELEMECANIQUE XS8D1A1PAL2 — Inductive proximity sensor, flat form 80×80×26 mm, Sn 60 mm, PNP
• TELEMECANIQUE XSDA400519 — Inductive proximity sensor, 80×80×40 mm, terminals, AC, NO/NC programmable

Models from other brands: Rectangular Inductive Sensors