HIKROBOT MV-CA050-20UM — Area Scan Cameras

5 MP, PYTHON5000, USB3.0, Mono, 71.8 fps

HIKROBOT MV-CA050-20UM

Status: Being discontinued

HIKROBOT part no.: SM000025431

Request a quote and stock check

The MV-CA050-20UM is a mono USB3.0 area-scan camera built around a 1″ PYTHON5000 CMOS global-shutter sensor, delivering 5 MP images at 2592×2048. Within the CA series’ USB3.0 line, it is the fastest model in the 5 MP group, reaching 71.8 fps at full resolution. In HIKROBOT’s catalog this model is listed under ‘Delisting Preparation’ status.

The USB3.0 interface supplies power up to 12 VDC (typ. 3.5 W) without a separate power cable and remains backward-compatible with USB2.0. A 6-pin Hirose connector provides 1 opto-isolated input, 1 opto-isolated output and 1 bi-directional non-isolated I/O line, with hardware trigger, software trigger and free-run mode all supported. Its C-mount and compact 29×29×30 mm housing suit tight machine integrations, and M2 screw holes let the USB3.0 cable be secured in place. It is compatible with USB3 Vision and GenICam.

Specifications

CA Series — Area Scan
ModelMV-CA050-20UM
Performance
Sensor typeCMOS, global shutter
Sensor modelPYTHON5000
Pixel size4.8 μm × 4.8 μm
Sensor size1″
Resolution2592 × 2048
Max. frame rate71.8 fps @ 2592 × 2048
Dynamic range57.5 dB
SNR39.5 dB
Gain0 dB to 15 dB
Exposure time59 μs to 10 sec
Exposure modeOff/Once/Continuous exposure mode
MonoMono
Pixel formatMono 8/10/10p/12/12p
BinningSupports 1 × 1, 1 × 2, 1 × 4, 2 × 1, 2 × 2, 2 × 4, 4 × 1, 4 × 2, 4 × 4
DecimationSupports 1 × 1, 2 × 2
Reverse imageSupports horizontal and vertical reverse image output
Image buffer128 MB
Electrical feature
Data interfaceUSB3.0, compatible with USB2.0
Digital I/O6-pin Hirose connector provides power and I/O, including opto-isolated input × 1
(Line 0), opto-isolated output × 1(Line 1), bi-directional non-isolated I/O × 1 (Line 2)
Power supply12 VDC, supports USB3.0 power supply
Power consumptionTyp. 3.5 W @ 5 VDC (USB3.0 provides power supply)
Mechanical
Lens mountC-mount
Dimension29 mm × 29 mm × 30 mm (1.1″ × 1.1″ × 1.2″)
WeightApprox. 56 g (0.12 lb.)
Ingress protectionIP30 (under proper lens installation and wiring)
TemperatureWorking temperature: 0 °C to 50 °C (32 °F to 122 °F)
Storage temperature: –30 °C to 70 °C (–22 °F to 158 °F)
Humidity20% RH to 80% RH (no condensation)
General
Client softwareMVS or third-party software meeting with USB3.0 Vision Protocol
Operating system32/64-bit Windows 7/10, 32/64-bit Linux
CompatibilityUSB3 Vision, GenlCam
CertificationCE, RoHS, KC
HIKROBOT part no.SM000025431
StatusBeing discontinued

Key features

  • Supports auto and manual adjustment for gain, exposure control, LUT, Gamma correction, etc.
  • Supports hardware triggering, software triggering and free run mode.
  • Adopts M2 screw holes for securing cable that connects USB3.0 interface.
  • Compatible with USB3 Vision Protocol, GenICam Standard, and the third-party software based on these protocol and standard.

Where it is used

The high frame rate makes this model suited to time-critical tasks on fast production lines, such as part presence/position checks and robotic pick guidance. The USB3.0 interface is a practical choice for lab benches, test stands or compact in-machine setups where cable runs stay short. Mono imaging fits contrast- and edge-based measurement or inspection tasks.

Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.

Is this camera right for your application?

Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.

Request a quote Other models in the series

The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.

Source: HIKROBOT product data

← CA Series — Area Scan